If your weed wacker keeps getting caught on thick overgrowth or the string on your trimmer keeps getting tangled up, it may be time to replace the wire. Rest assured that this is typically very easy to do since all weed eaters are basically designed the same way—even if you have a trimmer with 2 or 3 separate strings sticking out. In this article, we’ll show you how to restring your lawn trimmer in simple, straightforward steps. [1] X Research source
Things You Should Know
- Remove the cap covering up the spool of wire by pressing the tabs on the side, prying it off, or unscrewing it counterclockwise.
- Pull the spool out and unravel the old wire, but note how the wire was attached to the spool.
- Cut off 20–25 feet (6.1–7.6 m) of replacement string and attach it to the spool the same way the old string was attached.
- Reinstall the spool and put the cap back on to finish restringing your weed whacker.
Steps
Community Q&A
-
QuestionI have a Mounrfields trimmer. On the line spool it has arrows. Do I wind the line in the direction of the arrows?This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.wikiHow Staff EditorStaff AnswerYou always wind the spool in the direction of the arrow. That's pretty universal regardless of the trimmer model and brand.
-
QuestionWhy does my line retreat into the spool after just a few swipes of my freshly rewound spool?This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.wikiHow Staff EditorStaff AnswerUnfortunately, it's too short. You need to redo it with a longer length of string. Your line should always be flush with the spool plus an additional 6 inches or so of length.
-
QuestionAre the eyelets on a string trimmer head absolutely essential, or can I do without them? They've been lost is why I'm askingThis answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.wikiHow Staff EditorStaff AnswerFrankly, you're probably okay so long as the spool is tight. Just take it slow the first time you run the trimmer to ensure the spool doesn't fly out of the casing. It should probably be alright, though.
Video
Tips
- Change your weed eater’s string at least once a year to ensure it cuts cleanly and efficiently.Thanks
References
- ↑ https://www.youtube.com/watch?v=HbbaUoXSlos
- ↑ https://www.youtube.com/watch?v=HbbaUoXSlos
- ↑ https://www.youtube.com/watch?v=HbbaUoXSlos
- ↑ https://cdn.powerequipment.honda.com/pe/pdf/manuals/31VJ4001.pdf
- ↑ https://www.youtube.com/watch?v=HbbaUoXSlos
- ↑ https://cdn.powerequipment.honda.com/pe/pdf/manuals/31VJ4001.pdf
- ↑ https://files.snowjoe.com/product-manuals/TRJ608E%20MANUAL_ENG%2007302020-M%20FINAL.pdf
- ↑ https://cdn.powerequipment.honda.com/pe/pdf/manuals/31VJ4001.pdf
About This Article
Before you change the string on a lawn trimmer, make sure your trimmer is turned off and that the engine is cool to the touch to avoid any injuries. Check on the manufacturer's website to see what kind of line you need and cut it to the correct length. Then, remove the retaining cap from the trimmer head and locate the start of the trimmer line spool. Start inserting your new line by wrapping it in neat, straight rows to avoid jams. Finally, line up the retainer with the slot on the outside of the head and reattach your retaining cap. To learn how to change the line on a double-line trimmer, scroll down.
Reader Success Stories
- "Have had nothing but trouble with my Qualcast trimmer; the wire keeps breaking. I hope that I can put a sturdier wire/line on the wretched machine now, thanks to this article." ..." more