Download Article
Download Article
Knowing what faulty vacuum hoses look like is an important part of keeping your car in good condition. Many of these hoses control your car's idle, emissions components and environmental controls such as your heat. This article will tell you how to check engine vacuum hoses.
Steps
Get Car Support Solve Any Problem
Try Asking:
We’re sorry we don’t support the car you are looking for. Please enter its make, model, and year below so that we can add support for it.
Thank you! We’ll review your request and add support for this product as soon as possible. In the meantime, you can ask more questions about the products we currently support.
-
Check each hose for bulges and swelling. If a hose feels soft or spongy when you touch it, this can indicate damage caused by your car's oil. [1] X Research source- A swollen hose that is cracked and hard is often caused by heat damage. These hoses can be too close to heat sources under the hood or it may be the result of overheating.
- Bulging hoses can also be caused by electrochemical degradation when there's a coolant leak dripping onto hoses. Sometimes you can feel tiny cracks or weak spots when you squeeze a cool hose near one of the ends.
-
Examine the hoses for tiny cracks and scratches. Small parallel cracks in the cover of a hose can be ozone damage. Scratches and other irregular injuries to the hoses can be caused by hoses rubbing against a moving part of the engine. [2] X Research source
Advertisement
-
Detach the vacuum hose from a system or accessory of your car, such as the hose from your heater or cruise control. [3] X Research source -
Attach your vacuum gauge and start your vehicle's engine. Allow your car to idle for a couple of minutes. Your gauge should read between 14 and 18 inches of vacuum.- If the reading is low or non-existent, there's a blockage or leak in the vacuum line. Visually check the entire length of the hose for the problem.
Advertisement
Community Q&A
Search
-
QuestionMy truck has a rough idle but when I remove the vacuum line it smooths out. Why is this?Community AnswerIt depends on what part it is. On my 1999 Ford Ranger 4.0 V6 I had to replace the canister purge valve and I had almost the same situation. When you open the hood it should show a diagram with the vacuum hoses and the various places they go to. On mine it's the charcoal bed to the canister purge valve then to the throttle body. It wouldn't be the IAC so no worries there. It mainly depends on what truck it is.
-
QuestionHow long can I drive with a faulty vacuum hose?Community AnswerYou can drive it, but not repairing it will ruin your fuel economy and create possible damage to an expensive catalytic converter.
-
QuestionI accidentaly disconnected when cleaning my car and was confused as to where to connect the vacuum hoses for my LN130 Toyota turbo engine. Can anybody help me?Community AnswerLook on the top of your engine for a small disc object (might look like a flying saucer). There should be a small tube on the top of it. See if you can fit the vacuum hose back on tube.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Tips
- Some leaks are not visible during the visual inspection. In these cases, using a vacuum detector in conjunction with a hands-on examination can be useful.Thanks
- If you are unable to locate a suspected leak, take your vehicle to a mechanic's shop where there's more sophisticated detecting equipment.Thanks
- A hissing or vacuum sound can sometimes be heard if the leak is big enough.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
Things You'll Need
- Flashlight
- Vacuum detector (optional)
References
- ↑ https://philkotse.com/car-maintenance/step-by-step-guide-to-check-and-replace-failing-vacuum-hose-4860
- ↑ https://www.popularmechanics.com/cars/how-to/a3094/how-to-find-a-vacuum-leak/
- ↑ https://www.2carpros.com/articles/how-to-use-an-engine-vacuum-gauge
- https://www.youtube.com/watch?v=UL9NqqZToJs
- https://www.youtube.com/watch?v=qTzDY95aqXg
- https://www.youtube.com/watch?v=9CPqbaSgcok
About This Article
Thanks to all authors for creating a page that has been read 82,371 times.
Reader Success Stories
- "I do as much home maintenance as I can on my 1998 Toyota Tacoma SR5 extended cab pickup truck. The simple photos and verbal instructions provide guidance and safety precautions." ..." more
Advertisement
"I do as much home maintenance as I can on my 1998 Toyota Tacoma SR5 extended cab pickup truck. The simple photos and verbal instructions provide guidance and safety precautions."
..."
more
