Download Article
Keep your optical mouse clean and working smoothly with this simple guide
Download Article
Cleaning your optical mouse at least once per month can mitigate problems like inconsistent scrolling, stuttering, failure to track, and clicking issues. This wikiHow teaches you how to properly and safely clean your optical mouse.
Clean an Optical Mouse
Dampen a lint-free cloth with mild soap and water and use it to wipe down the surface of the mouse as well as the wheel. Use a damp Q-tip to clean the optical sensor. Use a toothpick to clean gunk in the crevices.
Steps
-
Gather your equipment. To clean your optical mouse, you will need the following items:- A microfiber cloth or cotton swab - For cleaning gunk off of the mouse. A lint-free microfiber cloth, such as one meant for cleaning screens or eyeglasses, won't leave behind fibers like paper towels and other materials. For smaller areas, you can use a cotton swab (such as a Q-tip).
- Mild soap and water - A cleaning solution that won't damage the paint or print. [1] X Trustworthy Source Microsoft Support Technical support and product information from Microsoft. Go to source Don't use a cleaning agent that contains ammonia (e.g., Windex), as it can harm your mouse. [2] X Research source
- 70% Isopropyl alcohol - For cleaning the inside of the mouse. Avoid using alcohol to clean the outside of the mouse, as it can damage the paint and print.
- Clean, dry, lint-free rags - For dusting and drying.
- Toothpicks - To clean out the dust and other matter in the crevices around your mouse.
- Screwdriver (optional) - To open your mouse's top, if it's removable. Check your mouse's manual or model number online for specific disassembly requirements.
- Tweezers (optional) - Optional, but helpful if you want to remove specific pieces of grit from sensitive places (e.g., the mouse's circuit board).
-
Remove the batteries from your mouse (if removable). This will prevent the mouse from shorting out if the insides get wet.- If you have a wired mouse, unplug it from your computer.
Advertisement -
Wipe the whole mouse down with a dry cloth. This removes any excess dust or grime from the mouse's exterior. [3] X Expert Source Jeremy Mercer
Computer Specialist Expert Interview. 26 July 2019. -
Run a toothpick around any crevices in the mouse's body. Doing so will pry out any grime that might be causing problems.
- For example, running the toothpick beneath the buttons will potentially remove grit that prevents the buttons from depressing the whole way.
-
Chip away any residue. Using a toothpick, pry up anything your initial wipe didn't get rid of.
-
Dip your cotton swab or cloth in mild soap and water. You'll use this to wipe down the dirty parts of your mouse. [4] X Expert Source Jeremy Mercer
Computer Specialist Expert Interview. 26 July 2019. -
Wring any excess liquid out of your Q-tip or cloth. Your cleaning tool of choice should be lightly damp but not dripping.
- It's very important to make sure the swab or cloth is not too wet—getting liquid inside of your optical mouse could damage its internal components.
-
Dab any dusty or grimy areas. Pay close attention to the following areas: [5] X Expert Source Jeremy Mercer
Computer Specialist Expert Interview. 26 July 2019.- The mouse's feet.
- The sides of the mouse.
- Any crevices that you cleaned with a toothpick
- If your mouse has a scroll wheel on top, gunk could also get on that wheel.
-
Apply mild soap and water to a clean Q-tip or section of cloth. It's extremely important to use a clean surface whenever moving from one component to another. -
Gently swab the mouse's sensor. Don't jab the sensor—instead, brush it with the tip of the Q-tip or a corner of the microfiber cloth. This will wash away any residue or particles that interfere with the mouse's tracking. [6] X Expert Source Jeremy Mercer
Computer Specialist Expert Interview. 26 July 2019. -
Clean your mouse pad. It doesn't matter how clean your mouse is—if your mouse pad is dirty, you'll have inconsistent performance and uneven tracking from your mouse. You can clean your mouse pad by wiping it down with a wet rag or using a lint brush or roller to remove hair and dust.
- If you use a lint roller, you'll likely have to wipe down the mouse pad afterward to prevent sticky residue from forming.
Advertisement
-
Remove the top of the mouse. If your mouse is especially dirty and you're able to do so, you can also clean its internal components. This process will vary depending on your mouse's manufacturer; some mice have a top that simply pulls up and away, while others require the removal of a screw. Check your mouse's manual or model number online to see how to disassemble it.
- Make sure the mouse is dry before opening it. If it's not dry, you can use a towel to dry it.
-
Apply alcohol to a fresh Q-tip or cloth, then wipe down the inside of the buttons. The inside of the top of the mouse can easily gather skin cells, residue from food, dust, hair, and much more, so give these buttons a good cleaning to clear out as much gunk as possible.
-
Remove any foreign matter from the internals. You'll often find hair or specks of grit in the following places:
- The mouse wheel
- The top of the circuit board (use tweezers for this)
- the front of the mouse's body
-
Reassemble your mouse once everything is dry. Five to ten minutes after wiping everything down, put your mouse back together and give it a final inspection. It should be completely clean by now.
Advertisement
Expert Q&A
Search
-
QuestionHow do you disinfect a computer mouse?Jeremy Mercer is the Manager and Head Technician at MacPro-LA in Los Angeles, CA. He has over ten years of experience working in electronics repair, as well as retail stores that specialize in both Mac and PC.You really only want to use 99% alcohol. If you use anything more potent than that, you may damage your mouse.
-
QuestionHow often should I clean an optical mouse?Jeremy Mercer is the Manager and Head Technician at MacPro-LA in Los Angeles, CA. He has over ten years of experience working in electronics repair, as well as retail stores that specialize in both Mac and PC.You really don't want to overdo it with the cleaning. Most optical mice can be pretty sensitive, so you don't want to fiddle with it too much when it comes to cleaning and you definitely don't want to overdo it.
-
QuestionCan I clean the sensor on the mouse with a toothpick?Jeremy Mercer is the Manager and Head Technician at MacPro-LA in Los Angeles, CA. He has over ten years of experience working in electronics repair, as well as retail stores that specialize in both Mac and PC.You may be able to pull that off, but I wouldn't recommend it. I'd go with something softer, like a cotton swab. The sensor is pretty fragile and you don't want to jab it with anything sharp.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Video
Tips
- If you use a higher-end optical mouse (e.g., a Razer), you might want to take it to a tech department to have it fixed rather than pulling the top off yourself. High-end mice have much more complex inner workings than their simpler counterparts.Thanks
- If you have a cheap optical mouse that won't click anymore or track properly, consider buying a new one.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
Warnings
- Be careful when using any liquid, including isopropyl alcohol, around the mouse. Getting excess liquid on the mouse will harm it.Thanks
Advertisement
References
- ↑ https://support.microsoft.com/en-us/windows/how-do-i-clean-my-microsoft-mouse-or-keyboard-889f667b-3909-35db-af54-5091373c6219
- ↑ https://blog.logitech.com/2015/05/29/keeping-your-logitech-mice-clean/
- ↑ Jeremy Mercer. Computer Specialist. Expert Interview. 26 July 2019.
- ↑ Jeremy Mercer. Computer Specialist. Expert Interview. 26 July 2019.
- ↑ Jeremy Mercer. Computer Specialist. Expert Interview. 26 July 2019.
- ↑ Jeremy Mercer. Computer Specialist. Expert Interview. 26 July 2019.
About This Article
Article Summary
X
Unplug the mouse from the computer, and then wipe its entire surface clean with a dry cloth. Use a toothpick to pry dirt and grime from the plastic, including all crevices. Dip a cotton swab in isopropyl alcohol and use it to remove stickiness and grime from the mouse's underside, including the sensor. Remove the mouse’s top cover, and then use another alcohol-dipped swab to remove all debris from the inside.
Did this summary help you?
Thanks to all authors for creating a page that has been read 335,017 times.
Reader Success Stories
- "I used this to help me complete a task I needed to do for computer maintenance.This article was easy to follow, and helped me to fulfill my task. Thanks!" ..." more
Advertisement
"I used this to help me complete a task I needed to do for computer maintenance.This article was easy to follow, and helped me to fulfill my task. Thanks!"
..."
more
