Download Article
Download Article
Plastic dishware and ovens don’t mix, but everyone makes mistakes. If you accidentally forgot a plastic cutting board or bowl in the oven and switched it on, you’re likely left with a melted plastic nightmare. Don’t fret, you can clean the oven yourself with materials you likely already have at home. If you have a gas or electric oven , cooling the oven is the best method. Heating works better for electric and self-cleaning ovens. Either way, you’ll have your oven back in commission in no time.
Things You Should Know
- Put the oven rack in the freezer for a few hours to harden the plastic. Then, scrape the brittle plastic off with a razor blade or scraping tool .
- Alternatively, turn your oven on the lowest heat setting. Wait a few minutes for the plastic to soften and scrape it off with a wooden spoon.
- To finish up, wipe your oven down with oven cleaner to remove any debris and plastic residue.
Steps
-
Remove the oven rack and put it into the freezer. You can leave it in there for a few hours to ensure that it is adequately cooled. This will make the hardened plastic more brittle and it will be easier to scrape off.
- Alternatively, you can fill a bag with ice to cool the plastic. This works for the rack, the coils, and the bottom of the oven. [1] X Research source Leave the ice on the affected area for 15 to 30 minutes.
EXPERT TIPHouse Cleaning ProfessionalRaymond Chiu is the Director of Operations for MaidSailors.com, a residential and commercial cleaning service based in New York City that provides home and office cleaning services at affordable prices. He has a Bachelors in Business Administration and Management from Baruch College.Letting the plastic cool can make it safer to clean. It's important to let melted plastic cool before you try to clean it, especially if it's been on the oven or stove top. This will reduce the chance that you'll burn yourself.
-
Scrape the brittle plastic. Once you remove the rack from the freezer or have cooled it thoroughly with the ice, you can begin to scrape the plastic. Using a razor blade or scraping tool, gently scrape at the melted plastic. [2] X Research source You may have to apply some pressure to peel it away from the metal. Continue scraping until you have removed the plastic from the rack, coils, and bottom of the oven entirely.
- The plastic may be sharp, so take care to wear gloves and use caution to avoid cuts.
EXPERT TIPHouse Cleaning ProfessionalRaymond Chiu is the Director of Operations for MaidSailors.com, a residential and commercial cleaning service based in New York City that provides home and office cleaning services at affordable prices. He has a Bachelors in Business Administration and Management from Baruch College.Use baking soda to make it easier to scrape off the plastic. First, use a wooden spatula or spoon to remove as much of the excess plastic as you can. Then, create a thick paste out of baking soda and warm water, and apply that to the plastic. Once you've done that, gently scrape away the paste and any remaining plastic.
Advertisement -
Sweep the plastic remnants into the trash. You’ll be left with plastic shavings and pieces on the bottom of the oven. Carefully sweep these out using gloves or a brush.
- You may also choose to put a bowl or pot under the rack when scraping to catch the plastic as it falls.
-
Clean the oven as usual. Before you use the oven again, be sure to wipe it with your usual oven cleaner to ensure the plastic residue is completely removed.Martha Stewart, Home, Garden, & Lifestyle Expert
When faced with the aftermath of melted plastic in the oven, resist the urge to immediately turn up the heat. Instead, arm yourself with patience and non-abrasive tools. Cool the oven fully, then gently pry away pliable plastic with wooden spoons or spatulas. For stubborn remnants, apply baking soda paste to lift residue before wiping clean with soft cloths and warm, soapy water. With care and elbow grease, order and cleanliness will emerge from the chaos.
-
Heat your oven. Be sure to use the lowest setting, usually no hotter than 200 °F (93 °C). Stay nearby to turn it off before it starts to smoke. Plastic fumes are not only unpleasant, but they’re also toxic. [3] X Research source Once you can smell the plastic melting, turn off the oven.
- Use a heating gun or hair dryer to heat the plastic. This is a great alternative to using the oven’s heating element. Warming the plastic directly with these tools may take longer but will make it easier to avoid burns or overheating.
-
Scrape the warm plastic on the rack. Using a wooden spoon to scrape the now malleable plastic will avoid scratching the surface of the oven and racks. If the plastic hardens again as you're working, simply shut the oven and warm it again. [4] X Research source
- To avoid burns, wear long sleeves and don gloves or oven mitts while you work.
- If possible, remove the rack entirely using oven mitts and scrape over your sink.
- Be sure to cover the drain to avoid plastic clogging your pipes and causing a whole new problem.
- If you cannot remove the rack, consider putting an oven-safe pot under the rack to catch the scrapings as you work.
-
Remove the warm plastic from the heating element. Using the same process as above, scrape the warm plastic off the bottom of the oven and from the heating element.
- Be sure to use a scraper that will not melt while touching the warm coils, so avoid plastic or wood for this step. Instead, opt for a razor blade or scraping tool. [5] X Research source
-
Remove the plastic scrapings. Ensure the oven and heating element are completely cool before you start this step.
- Use gloves or a brush to avoid cutting yourself on the potentially sharp plastic.
-
Wipe the oven clean. Using your regular oven cleaner, wipe out any of the remaining residue before using it to cook.
Community Q&A
-
QuestionAfter cleaning the plastic out of the oven, can I use my self-cleaning oven to clean it out instead of a cleaner?Lina DaSilvaTop AnswererUsing the self-cleaning function after removing melted plastic from your oven can be risky. The high temperatures may produce toxic fumes from any plastic residue left behind. It's better to clean any leftover bits manually with gentle methods like warm, soapy water and a soft scraper. Once you're confident all the plastic is gone, you could use the self-cleaning cycle for any remaining grime.
Video
Tips
- Never flush plastic down the toilet or drain. It will go into the ocean!Thanks
- Open the windows when cleaning the oven to avoid inhalation of fumes.Thanks
Warnings
- Wear gloves and/or oven mitts to protect from burns or cuts.Thanks
References
- ↑ https://www.goodhousekeeping.com/home/cleaning/q-and-a/a2487/remove-plastic-meltdown-oct01/
- ↑ https://www.reference.com/world-view/remove-melted-plastic-oven-floor-42b63a96b95a103b
- ↑ https://engineering.mit.edu/engage/ask-an-engineer/can-we-safely-burn-used-plastic-objects-in-a-domestic-fireplace/
- ↑ https://www.goodhousekeeping.com/home/cleaning/q-and-a/a2487/remove-plastic-meltdown-oct01/
- ↑ https://www.goodhousekeeping.com/home/cleaning/q-and-a/a2487/remove-plastic-meltdown-oct01/
About This Article
To clean melted plastic out of your oven, cool it, then scrape it out. Once your oven’s cooled down, put a bag of ice on the melted plastic to make it easier to scrape. If there’s plastic on your oven rack, put it in the freezer to chill. After 30 minutes, use a razor blade or scraping tool to gently scrape the plastic off. Use protective gloves, since the plastic pieces can be sharp. Then, clean your oven like normal. Alternatively, use heat to melt the plastic again. First, turn your oven on no hotter than 200 degrees Fahrenheit. If the oven starts to smoke or you smell plastic, turn it off and open a window. When the plastic is warm, scrape it off with a razor or scraping tool. Then, clean your oven. For more tips from our Cleaning co-author, including how to melt plastic with a hairdryer, read on.
Reader Success Stories
- "I left a strainer with a plastic handle on the top shelf of the oven. The plastic handle melted and dripped inside the stove on one side. I turned the oven off and followed directions here ON how to solve the plastic removal. It worked. Thank you. " ..." more
