How to Clean & Protect Uncoated Wood: A Complete Beginner’s Guide

PDF download Download Article
Clean your unfinished wood with these maintenance tips
PDF download Download Article

Cleaning unfinished wood can be a daunting task because there is no layer of varnish to protect the wood from damage. However, with a gentle hand, it’s not as difficult as it may seem. In this article, we’ll teach you everything you need to know to clean, protect, and maintain uncoated wood, as well as answer common questions about the process.

How to Clean Untreated Wood

Wipe away dust and dirt with a microfiber cloth and a soft-bristle brush. Use a stiff-bristle brush to loosen stubborn grime, then vacuum it all away. If stains remain, lightly dampen a cloth with a mild wood cleaner or dish soap and water, wring it out, and wipe it across the surface. Let the wood dry completely.

Section 1 of 4:

How to Clean Unfinished Wood

PDF download Download Article
  1. A clean microfiber cloth is great for removing surface dirt that is not ingrained very deeply, while a soft-bristle brush is good for brushing away small pieces of debris trapped inside the groove and ridges of the unfinished wood. Run the cloth along the surface to pick up dust, then use the brush to gently wipe away anything in the crevices and then vacuum it up. [1]
    • Some recommend sweeping or brushing unfinished wood every day, especially if it’s a surface you use frequently. Usually, dusting once a week is enough, however.
    • For best results, use a gentle flicking motion with the bristles of the brush on the surface of the wood.
    • Alternatively, use a microfiber mop or broom.
    • Note that this section contains different ways to clean unfinished wood. Depending on how dirty the surface is, you may need to use one, two, or more of these methods.
  2. Untreated wood is porous and absorbent, so it isn’t recommended to use harsh, store-bought cleaners. Instead, mix equal parts white vinegar and water in a spray bottle. Lightly spray it on the affected surface and immediately wipe it with a microfiber cloth. Don’t let the solution sit for more than a few minutes, as it will seep into the wood and potentially damage it. [2]
    Advertisement
  3. Erasing compounds are elements used to remove dirt from bare wood surfaces. Apply a small amount of the erasing compound on the surface of the unfinished wood and use some cotton balls to work the cleaning material into the grain. Gently swirl the cotton balls in circular motions for best results. Once finished, vacuum the wood to pick up any remnants of the erasing compound. [3]
    • Be sure to avoid rubbing the wood too harshly, as this could cause damage.
    • Once the erasing compound turns gray, it is no longer effective and needs to be reapplied.
  4. Using a stiffer brush on the surface of your unfinished wood may be more useful for wood that has dirt and other debris more deeply ingrained in the grain of the wood. Wipe the unfinished wood and vacuum up any fragments that become loose. Be careful not to rub the stiff bristles on the wood too harshly, as this may damage the wood. [4]
    • This method is most effective on unfinished wood that is already in good condition.
    • Use caution when brushing the surface or using the vacuum on the wood. Being too rough can cause visible and lasting imperfections.
  5. Mineral spirits are a kind of solvent that painters often use when cleaning their used painting brushes. Dampen a towel with the solution and gently wipe the surface of your unfinished wood. Be sure to wear gloves while you are handling the mineral spirits and avoid directly inhaling the fumes. [5]
    • Because this is a type of liquid treatment, be very careful and apply the mineral spirits sparingly to avoid damaging the wood.
  6. Sometimes, dirt or stains may be so deeply ingrained that dusting and dry scrubbing won’t remove it all. If wiping and vacuuming the surface isn’t enough, lightly dampen a cloth with a mild wood cleaner or a mixture of dish soap and water. Wring the cloth out, making sure it isn’t too wet, then wipe the surface. Alternatively, apply the cleaner with a soft-bristle brush, working in the direction of the grain. [6]
    • Do not use excessively wet cleaning methods, as water can be extremely damaging to unfinished wood and make it harder to finish later. Use as little water as possible and dry the wood thoroughly.
    • Do not use any cleaners with harsh chemicals, as these can damage the wood’s porous surface.
    • Always test your cleaning method in a small, conspicuous area first to see if it will damage the wood.
    • Cleaning expert Susan Stocker recommends “using simply deionized water [to clean wood]. It’s chemical-free, won’t damage any finish, and dries super fast (wood does not like water!).” [7]
    • Cleaning expert Ashley Matuska agrees that using water and a damp microfiber cloth is “your best bet” for cleaning unfinished wood. She warns against “overly saturating it.” [8]
  7. Adhesive rubber is very sticky and pliable so that it can be forced into the small crevices on the surface of wood. Apply the rubber to the surface and gently knead it to work it into the grain. As it becomes darker with dirt, tear off the top layer to work with a fresh one. [9]
    • This works especially well for cleaning window tracks, door jambs, and cabinet corners.
    8. Advertisement
Section 2 of 4:

How to Protect Unfinished Wood

PDF download Download Article
  1. Consider applying a finish to your unfinished wood furniture, floors, or other surfaces to help protect them from dirt, scratches, and other damage. Some common finishes include polyurethane , lacquer , and shellac , but be sure to research which type of finish would be best for your specific piece. Once you’ve chosen an appropriate finish, follow its manufacturer instructions to apply it properly. [10]
  2. Wood waxes and natural oils help protect uncoated wood because they penetrate the wood, enhancing its natural beauty and providing a barrier against moisture and stains. Apply the oil or wax per the manufacturer’s guidelines and allow it to absorb fully before gently buffing the surface with a cloth. [11]
  3. If your unfinished surface is used frequently, like a table, it’s more likely to get dirty and/or damaged. Use protective accessories like coasters, placemats, and tablecloths to reduce the risk of stains, water rings, or heat marks. If you have unfinished wood flooring, try to cover the surface with an area rug and avoid wearing shoes.
    4. Advertisement
Section 3 of 4:

How to Maintain Unfinished Wood

PDF download Download Article
  1. Use a microfiber cloth or feather duster to remove surface dust and prevent it from settling into the wood grain. Try to dust at least once a week. For routine cleaning (a couple of times a month), lightly dampen a cloth with water or a mild wood cleaner and wipe down the uncoated surface. [12]
    • Be sure the cloth isn’t too wet, as this could damage the untreated wood.
  2. Prolonged exposure to direct sunlight may cause unfinished wood to crack or fade. Keep your wooden furniture away from windows or use curtains, blinds, or UV-protective film to help decrease exposure to the light. If your unfinished wood is outdoors, try to keep it in an area with a lot of shade. [13]
    • If you have outdoor wooden furniture, consider applying an outdoor sealant or protective finish. Protect your wood from sun exposure and rain by bringing it inside when not in use.
  3. Wood is sensitive to changes in temperature or humidity, and it can warp, crack, or swell if those factors fluctuate frequently. [14] Keep your unfinished wood in a temperature-stable environment, and use a humidifier or dehumidifier as necessary to control humidity levels—especially during particularly dry or humid seasons.
    • Your maintenance will likely vary depending on the season. For example, use humidifiers during dry winter months, and use dehumidifiers if you experience hot, muggy summers.
  4. Even when you do your best to protect your unfinished wood surfaces, scratches are bound to happen over time. For small scratches, use a wood touch-up pen or matching wood stain to cover the damage. Gently sand away larger damage with fine-grit sandpaper . Remember to follow the wood grain, then refinish the area with a protective finish or wax. [15]
  5. If you act fast, you can avoid accidental spills from becoming stains. Blot up liquids with an absorbent cloth; avoid rubbing, as this may spread the liquid or damage the wood. If the stain is stubborn, create a paste out of baking soda and water and rub it onto the area with a soft cloth. [16] If all else fails, sand and refinish the stained area.
  6. Insects like termites , woodworms , and carpenter ants can pose a threat to untreated wood. Regularly inspect the wood for signs of infestation like small holes, sawdust, a weakened wood structure, or the presence of insects themselves, and address any problems immediately. [17] To prevent infestations, keep your home clean and moisture-free.
    • If you suspect you have an insect infestation, call a pest control specialist as soon as possible.
    7. Advertisement
Section 4 of 4:

Cleaning Unfinished Wood FAQs

PDF download Download Article
  1. Yes, some wooden furniture is finished in a way that preserves the original style, color, and wood grain of an unfinished piece while still being protected from spills, stains, and other damage. If you like the look of unfinished wood but don’t want to deal with the hassle of maintaining it, consider buying a finished piece that replicates the uncoated look.
  2. Most unfinished wood surfaces can be cleaned the same way—with microfiber cloths, soft- or stiff-bristle brushes, and a vacuum. [18] For floors, consider using a soft-bristle broom and a microfiber mop so you don’t have to clean on your hands and knees. Use a gentle soap and water or water and vinegar to clean tougher stains.
  3. Yes, Dawn and other mild dish soaps work well to clean unfinished wood. [19] Mix a bit of dish soap with water and dip a microfiber cloth into the mixture. Wring it out well, then gently wipe the surface and let it dry completely.
  4. Baking soda is an effective way to remove stains from unfinished wood. Mix baking soda with a little bit of water to create a paste. Apply the paste to the wood with a soft cloth and let it sit for a few minutes before wiping it away. For particularly stubborn stains, mix the baking soda with vinegar instead. [20]
    5. Advertisement

Community Q&A

Search
Add New Question
  • Question
    How do I clean unfinished kitchen cabinets for painting?
    Community Answer
    Use a Mr. Clean Magic Eraser with water and just scrub. The eraser is soft and won't damage your cabinets, and just using water is enough to remove any dirt or grime.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 33 Helpful 23
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Tips

      • Work slowly and use a gentle hand when cleaning unfinished wood. Because it doesn’t have a protective finish, it is quite susceptible to scratches and other damage.
        Thanks
        Helpful 0 Not Helpful 0
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      You Might Also Like

      How to
      Clean Paneling
      How to
      Clean Antique Furniture
      How to
      Remove Mold from Wood Furniture
      How to
      Remove Burn Marks on Wood
      How to
      Get Stains out of Wood
      How to
      Clean Painted Wood
      How to
      Clean Wood Doors
      10 Home Hacks for Removing Stickers from Any Wood Surface
      How to
      Remove Ink Stains from Wood Furniture
      How to
      Remove Mold from Wood: Best Cleaners & Prevention Tips
      How to
      Polish Wood
      How to
      Get Water Stains Off Wood
      How to
      Get Crayon Off Wood: Solutions Using Household Items
      How to
      Clean Old Wood
      Advertisement

      References

      1. ↑ https://www.nps.gov/museum/publications/conserveogram/07-01.pdf
      2. ↑ https://www.cleanipedia.com/gb/floor-and-surface-cleaning/clean-and-polish-wood.html
      3. ↑ https://publications.gc.ca/collections/collection_2016/pch/NM95-57-7-1-2016-eng.pdf
      4. ↑ https://publications.gc.ca/collections/collection_2016/pch/NM95-57-7-1-2016-eng.pdf
      5. ↑ https://www.cleanipedia.com/gb/floor-and-surface-cleaning/clean-and-polish-wood.html
      6. ↑ https://www.cleanipedia.com/gb/floor-and-surface-cleaning/clean-and-polish-wood.html
      7. ↑ Susan Stocker. House Cleaning Professional. Expert Interview. 8 November 2019.
      8. ↑ Ashley Matuska. Professional Cleaner. Expert Interview. 15 April 2019.
      9. ↑ https://publications.gc.ca/collections/collection_2016/pch/NM95-57-7-1-2016-eng.pdf
      1. ↑ https://www.bobvila.com/articles/2150-paints-and-finishes/
      2. ↑ https://howtocleanthestuff.com/how-to-clean-unfinished-wood/
      3. ↑ https://www.cleanipedia.com/gb/floor-and-surface-cleaning/clean-and-polish-wood.html
      4. ↑ https://howtocleanthestuff.com/how-to-clean-unfinished-wood/
      5. ↑ https://awiqcp.org/news-and-blog/the-effects-of-heat-on-architectural-woodwork/
      6. ↑ https://www.cleanipedia.com/gb/floor-and-surface-cleaning/removing-wood-stains-the-ultimate-guide.html
      7. ↑ https://www.cleanipedia.com/gb/floor-and-surface-cleaning/clean-and-polish-wood.html
      8. ↑ http://extension.msstate.edu/content/signs-termite-infestation
      9. ↑ https://howtocleanthestuff.com/how-to-clean-unfinished-wood/
      10. ↑ https://www.cleanipedia.com/gb/floor-and-surface-cleaning/clean-and-polish-wood.html
      11. ↑ https://www.cleanipedia.com/gb/floor-and-surface-cleaning/clean-and-polish-wood.html

      About This Article

      Article Summary X

      With a gentle hand and the right tools, you can easily clean your unfinished wood without damaging it. All you’ll need is a soft brush, vacuum cleaner, and a microfiber cloth. Use your brush to gently wipe any debris from the cracks and crevices of your wood. Then, vacuum up the dirt and wipe your wood with a microfiber cloth to pick up any surface dirt. Avoid using water, since this can damage your wood. You should do this at least once a week to keep your unfinished wood clean. To remove any grime or stains, try using a stiffer brush. You can also use an adhesive rubber, which will pick up dirt as you roll it over your wood surface. For more tips, including how to clean your unfinished wood with mineral spirits, read on!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 156,170 times.
      If you buy through links on our site, we may earn a commission .

      Did this article help you?

      Advertisement