Download Article
Download Article
One of the most neglected spaces when it comes to cleaning a bathroom is the fan. Having a clean, functional fan can lessen bathroom odors, as well as combat mold and mildew growth. These issues can become a health hazard if left unattended for too long. [1] X Research source By cleaning your fan around every 6 months, you will be able to remove built up dirt before it becomes a problem.
Steps
-
Turn off the power. Before you do anything else, ensure that the fan is turned off and cannot turn back on until you are finished cleaning it. [2] X Research source Most models will have a plug that is located directly behind the cover. You could remove the cover first and unplug the fan, but just to be safe, go and temporarily pull the breaker for your bathroom. The fan is now safe to work on. -
Remove the cover. Dust will fall when the cover is removed. To avoid the dust, position your stepladder such that you can reach the cover, but are not standing directly below it. Most covers will have 2 prongs on opposite sides holding it in place, others just need to be unscrewed. Remove the cover by pressing these prongs in or removing the screws, then set the cover aside.Advertisement -
3Remove the fan. Unscrew the assembly that is holding the fan in place, then very gently remove the fan. Be careful not to drop the fan or hit it on the side of the exhaust pipe as that could potentially chip the fan blades. Broken fan blades will cause the fan to be louder and less effective. [3] X Research source
Advertisement
-
Clean the cover and fan. Start by vacuuming off the majority of the built up grime on both the cover and the fan. Then dip a rag, preferably a microfiber cloth, in soapy water and use it to wipe up the remaining dust. Be as thorough as you can, you will probably not do this again for a while.- You can let the cover soak in a tub of hot soapy water, but the fan should be wiped by hand to avoid getting water on the motor assembly or plug.
-
Vacuum the exhaust pipe. Use a crevice or brush attachment and vacuum off the inside of the exhaust pipe. If you can reach, also use your rag or cloth to wipe off what the vacuum could not get. -
Vacuum the external exhaust port. This can be done later once the entire process is finished, but at some point you should go outside and find the exterior vent for your bathroom fan. Depending on where the bathroom is located, this vent will either be on the roof or the side of your house. Bring a damp rag to wipe off any dirt that has built up on the other end of your exhaust pipe. -
Wipe and vacuum the fan housing. If your fan had an accessible plug, be careful not to get any water inside the outlet. Doing so could result in electrocution or short circuit the fan when you plug it back in. [4] X Research source Therefore, use a dry rag to wipe off the fan housing, then vacuum up any remaining dust or debris.
Advertisement
-
Put the fan back in place. Before reinstalling the fan, make sure that you cleaned off all the dust from in between each of the blades and dried it thoroughly. Carefully reinsert it into the exhaust pipe and screw the bracing back into place. Use your fingers and spin the fan around a few rotations to make sure that it is not rubbing against anything. -
Turn the power back on. Plug the fan back into the outlet and reset the breaker for your bathroom. The fan is now dangerous again, so do not touch it or continue to clean it after this point. -
Reinstall the cover. Once the cover has dried, either screw it back in or bend the prongs until the cover snaps back into place. -
Test the fan. Turn the fan on again to make sure everything works as normal. The fan should be quieter than it was before and provide a higher amount of air flow.
Advertisement
Expert Q&A
Search
-
QuestionHow do you unplug a bathroom fan?Michelle Driscoll is the Owner of Mulberry Maids, which is based in Fort Collins, Colorado. With five years of experience, her business specializes in cleaning homes and small offices. She holds a Masters in Public Health from the Colorado School of Public Health. Additionally, Mulberry Maids has an A+ rating from the Better Business Bureau.Many fans will have a plug directly behind the cover. However, to be safe, you can always turn off the power by pulling the breaker for your bathroom.
-
QuestionHow long should you leave the fan on after a shower?Michelle Driscoll is the Owner of Mulberry Maids, which is based in Fort Collins, Colorado. With five years of experience, her business specializes in cleaning homes and small offices. She holds a Masters in Public Health from the Colorado School of Public Health. Additionally, Mulberry Maids has an A+ rating from the Better Business Bureau.In order to fully clear all humidity from the air, you should leave your bathroom fan on for at least 20 minutes.
-
QuestionHow do I clean grease off my extractor fan?Michelle Driscoll is the Owner of Mulberry Maids, which is based in Fort Collins, Colorado. With five years of experience, her business specializes in cleaning homes and small offices. She holds a Masters in Public Health from the Colorado School of Public Health. Additionally, Mulberry Maids has an A+ rating from the Better Business Bureau.If you are able to remove the fan, you can do so and submerge it in soapy water. However, many fans are not fully removable. If so, you will need to carefully use soapy water and a sponge to clean off the grease stains. Vinegar also works well to break down the grease.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Tips
- Clean the fan before you clean the rest of the bathroom. Dust and grime will fall when you take down the fan, so it saves time if you do not have to clean the bathroom a second time.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
Warnings
- Make sure that the fan is off before you touch it. There is no reason to get electrocuted or lose a finger in this process. Either unplug the fan when you remove the cover or temporarily pull the breaker for the bathroom while you are cleaning it.Thanks
Advertisement
Things You’ll Need
- Stepladder
- Screwdriver
- Vacuum
- Microfiber cloth or rag
- Bucket of soapy water
- Dry towel
References
- ↑ http://www.onegoodthingbyjillee.com/2014/12/cleaning-bathroom-fan.html
- ↑ https://www.todayshomeowner.com/how-to-clean-a-bathroom-exhaust-vent-fan/
- ↑ http://removeandreplace.com/2013/11/22/bathroom-vent-exhaust-fan-making-noise-turning-fix/
- ↑ http://removeandreplace.com/2013/11/22/bathroom-vent-exhaust-fan-making-noise-turning-fix/
About This Article
Article Summary
X
To clean a bathroom fan, start by pulling the breaker to your bathroom so the power is off. Then, take off the cover over the fan by pressing in the prongs on the sides or unscrewing it, and carefully unscrew and pull out the fan behind it. Next, vacuum up any dust and grime on the cover and fan, and then vacuum inside the exhaust pipe and over the external exhaust port. Finally, wipe down the cover and fan with soapy water, and reinstall the fan in the wall. For more tips from our Cleaning co-author, like how to hook your fan back up, read on!
Did this summary help you?
Thanks to all authors for creating a page that has been read 121,033 times.
Reader Success Stories
- "It is great to learn how to clean things without breaking them by reading wikiHow."
Advertisement
84%
of readers found this article helpful
.
Click a star to add your vote
% of people told us that this article helped them.
"It is great to learn how to clean things without breaking them by reading wikiHow."
