How to Clean a Derma Roller

PDF download Download Article
PDF download Download Article

A derma roller is a small cosmetic roller used to keep your skin healthy and treat acne and scarring. To avoid contaminating your skin, clean your derma roller before and after you use it. Use rubbing alcohol or hydrogen peroxide to sterilize your derma roller, sanitize your derma roller with purifying tablets, or use soap for a quick clean. With some disinfectant and patience, you can easily clean your derma roller.

Method 1
Method 1 of 3:

Sterilizing Your Derma Roller

PDF download Download Article
  1. Turn on your faucet, and hold your roller under the water for a few seconds to get rid of any superficial debris, like dead skin or blood. [1]
    • This helps remove skin particles that may not come off with just alcohol.
  2. Fill up the bowl with 60-90% rubbing alcohol or hydrogen peroxide so the roller is completely covered. If you use less than 60% isopropyl alcohol, it will not sanitize your derma roller. [2]
    • You can use a plastic Tupperware container or ceramic dish, for example.
    Advertisement
  3. Place your derma roller upside down in your container. The needles of your roller should face upwards.
    • If you’d like, you can set a timer on your phone or kitchen clock.
  4. After your derma roller soaks for an hour, remove it from your container and hold it under running water. This gets rid of any remaining skin particles and leftover alcohol or peroxide. [3]
  5. After you sanitize your roller, it is important to keep it free of germs. Flip the handle around so the roller is upside down, and put it on a clean paper towel. Let the roller sit for 10-20 minutes. [4]
    • Air-drying is the best method to dry your derma roller. Towels can get caught in the needles.
  6. Once your roller is dry, place it inside its container and fasten the lid. This way, your derma roller stays clean and disinfected. [5]
    • If you store your derma roller elsewhere, you can spread bacteria to your face when you next use it.
    7. Advertisement
Method 2
Method 2 of 3:

Using Purification Tablets to Sanitize the Roller

PDF download Download Article
  1. Many derma roller companies sell purifying tablets to make cleaning easy. If your roller came with a tablet, read the instructions detailed on the packaging. If your derma roller does not have a cleaning tablet, use denture tablets instead.
    • Denture tablets are designed to sanitize, and you can safely use them on your derma roller.
  2. Different purifying tablets will call for varying levels of water. Typically, they use about 1  c (240 mL) or so. Measure the water with a measuring cup, and pour it into a small dish. [6]
    • If your derma roller cleaning container has a fill line on the outside, simply use that as a guideline as you fill it.
  3. Rip open the packaging around the individual tablet, and place the tablet into the water. Once you dunk the purifying tablet in the water, the chemicals in the tablet mix with the water to create your sanitizing solution. This happens instantly, so place your derma roller into the water right after the tablet. [7]
    • Make sure the entire derma roller is completely covered for a thorough clean.
  4. Follow the directions on the packaging to ensure your derma roller is completely sanitized. Some purifying tablets only need to soak for 5-10 minutes. [8]
    • If you are using denture cleaning tablets, leave your derma roller in the solution overnight.
  5. Once your derma roller has soaked thoroughly, use warm water to rinse off the solution. Then, set the roller on a clean paper towel for 10-20 minutes so it can air dry. [9]
    • If you pat your roller to dry, it may bend the needles. If the needles are bent, they may scratch your face.
    6. Advertisement
Method 3
Method 3 of 3:

Utilizing Other Cleaning Techniques

PDF download Download Article
  1. Fill up a plastic container halfway with warm water from your faucet. Add 3-5 drops of dishwashing liquid or Castile soap, and mix it up with a spoon. Then, place your derma roller in the container upside down. Soak your derma roller for 10-20 minutes.
    • This gets rid of any surface blood or skin cells.
  2. Derma rollers have many small needles that poke into the pores of your skin. Dirt, blood, and dead skin can get trapped in between the needles. For a deep clean, use a new, clean toothbrush with soft bristles. Turn on warm water, and hold your roller underneath the stream. Brush your roller gently with your toothbrush for about 60 seconds.
    • This gets rid of dirt and residue that alcohol or soap may not lift off.
    • While this is optional, it provides a deep, thorough clean.
    • If you use a used toothbrush, you can spread bacteria to your roller.
  3. Place the wet sponge on a clean, flat surface. Then, move your roller back and forth across the top of the sponge. Do this for 20-45 seconds to get rid of dirt and residue that other methods may not remove.
    • This is optional, though it is a good idea if you frequently use your roller or have an older roller.
    • Use a new, clean sponge to avoid contaminating your face.
  4. Use warm water from your faucet to wash your roller off and get rid of any dirt, skin, blood, or debris that came loose when cleaning it. Then, place your roller upside down on top of a clean paper towel.
    • Your roller should dry in about 10-20 minutes.
    5. Advertisement

Community Q&A

Search
Add New Question
  • Question
    Can the rubbing alcohol be reused? Or just used once and discard?
    Community Answer
    To clean your derma roller, use rubbing alcohol that contains approximately 90 percent of pure, concentrated ethanol or isopropyl alcohol.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 300 Helpful 25
  • Question
    Can I use Dettol liquid to clean my derma roller?
    Community Answer
    Do not use Dettol liquid to clean your derma roller because it won't kill all microorganisms and it can also cause burning to your skin.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 10 Helpful 34
  • Question
    Can I use someone else's derma roller after sterilizing it ?
    Community Answer
    Don't use someone else's derma roller, it is only meant to be used by one person. Replace it every 3 months to prevent irritation from dull needles.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 4 Helpful 25
See more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Tips

      • Sterilization removed all microorganisms, while sanitizing thoroughly cleans but an allowable amount of microorganisms remain.
        Thanks
        Helpful 4 Not Helpful 4
      • Regularly cleaning your derma roller may make it last longer. A roller typically is good for 15 uses.
        Thanks
        Helpful 0 Not Helpful 11

      Tips from our Readers

      The advice in this section is based on the lived experiences of wikiHow readers like you. If you have a helpful tip you’d like to share on wikiHow, please submit it in the field below.
      • Depending on how often you use it, consider replacing your derma roller every 3-6 months to ensure the needles are sharp and effective.
      • Be careful not to dull the needles by dropping the roller or tapping it against a hard surface.
      • For hygiene reasons, it's important never to share your derma roller with anyone else.
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      • Avoid using harsh chemicals like bleach on your derma roller. These chemicals can damage your skin when you use the roller.
        Thanks
        Helpful 14 Not Helpful 1
      • If you don’t clean the derma roller, it can grow bacteria, which transfers to your skin the next time you use it.
        Thanks
        Helpful 12 Not Helpful 2
      • Do not use boiling water when cleaning your derma roller. This can damage the needles.
        Thanks
        Helpful 20 Not Helpful 7
      Advertisement

      You Might Also Like

      Easy & Effective Ways to Clean Dirty Coins at Home
      How to
      Clean Vomit from a Mattress
      How to
      Get Rid of a Musty Smell in Your House
      How to
      Clean Up Vomit & Diarrhea (Plus, Disinfect Contaminated Surfaces)
      How to
      Wash Carpet by Hand: Deep Cleaning & Spot Cleaning
      How to
      Clean Your Sink with Baking Soda
      How to
      Clean Carpet with a Steam Cleaner
      How to
      Get Rid of Vomit Smell
      The Best Ways to Clean Copper or Zinc Pennies
      How to
      Clean Records without Damaging Them
      The Best Ways to Eliminate Throw up Stains & Odors from Carpet
      How to
      Clean Rubber
      How to
      Clean Up Spilled Gas: The Do's & Don'ts
      How to
      Neutralize Bleach
      Advertisement

      Expert Interview

      Thanks for reading our article! If you'd like to learn more about cleaning, check out our in-depth interview with Mohiba Tareen, MD .

      References

      1. ↑ https://youtu.be/Hs-n8j46XXg?t=28s
      2. ↑ https://youtu.be/Hs-n8j46XXg?t=41s
      3. ↑ https://youtu.be/Hs-n8j46XXg?t=1m7s
      4. ↑ https://youtu.be/Hs-n8j46XXg?t=1m13s
      5. ↑ https://youtu.be/Hs-n8j46XXg?t=1m16s
      6. ↑ https://youtu.be/VzXCWbY8DpE?t=54s
      7. ↑ https://youtu.be/VzXCWbY8DpE?t=1m4s
      8. ↑ https://youtu.be/VzXCWbY8DpE?t=1m23s
      9. ↑ https://youtu.be/VzXCWbY8DpE?t=1m42s

      About This Article

      Article Summary X

      To clean a derma roller, rinse it under warm water for 2-3 seconds to remove anything that might be on the surface of the tool. After you rinse it, place the roller in a small dish with the needles facing upward. Cover the roller completely with rubbing alcohol or hydrogen peroxide and let it sit for about an hour. Afterward, rinse the derma roller under warm water again, then lay it upside-down on a paper towel and let it air dry for 10-20 minutes. To learn how to sanitize the roller with purification tablets, read on!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 678,071 times.

      Reader Success Stories

      • Deena Kelly

        Jul 4, 2021

        "wikiHow always gives you the answers. Today I've learnt new ways to clean and disinfect my derma rollers. I ..." more
      More reader stories Hide reader stories
      Share your story

      Did this article help you?

      Advertisement