Download Article
Download Article
As your computer ages, dust will build up inside of it. The intake fans suck dust in and then dust collects near the vents and on the motherboard. If not removed from time to time, dust can cause your computer to overheat and malfunction. It can even short circuit and ruin your motherboard!
Steps
-
Turn off and unplug your computer.
-
Use compressed air to remove dust.
- Purchase a can of compressed air (can be found online or at most department stores). Alternatively, you can use an air compressor. But make sure to have your PSI setting below 50 PSI to ensure you do not damage your motherboard.
Advertisement -
A soft-tipped paint brush will work as well for dust that has caked up in areas such as the fans, power supply, intake vents and between RAM modules.
-
Open your computer's case. The case may be held together with screws or some other mechanical latching system.
- If you cannot figure out how to open your case, consult your manual for your PC or Google your computer's model number for details.
-
Blow all parts of the motherboard, including the fan and the heat sink.
-
Close the computer's case.
-
Plug in the computer, and turn it on.
Advertisement
Community Q&A
Search
-
QuestionCan I use a hair dryer instead of compressed air?DenneiskTop AnswererNo. A hair dryer could heat up the parts and cause damage, as well as possibly not having enough force to effectively push debris out of the way.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Video
Tips
- Some fans will only spin if you attempt to clean them using compressed air. Try using a Q-Tip or other object to remove dust.Thanks
- Compressed air works great for cleaning your keyboard as well.Thanks
- Use blower to put fast hair and cleaning on motherboard's dust.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
Warnings
- Do not exceed 50 PSI when using an air compressor. If the dust isn't coming off at this pressure rating, use a soft-bristled brush to remove the dust.Thanks
- Make sure to eliminate all static electricity. This can be done by touching the metal chassis of your computer or using a commercially bought electrostatic discharging wrist strap (these can be found online or at electronics stores).Thanks
- Do not attempt to open a power supply to clean it.Thanks
Advertisement
Things You'll Need
- Can of compressed air
- Air compressor (depending on method)
- Screwdriver (optional if the case is screwed)
- Soft-tipped paintbrush
-
- Use blower to put fast hair and cleaning on motherboard's dust. [1] X Research source
About This Article
Thanks to all authors for creating a page that has been read 112,308 times.
Advertisement