PDF download Download Article PDF download Download Article

Writing with a fountain pen feels elegant and effortless until dirt, dust, or dried-up ink interrupts the smooth flow of the nib. Fountain pens need cleaning every 4 to 8 weeks to stay in tip-top shape, but the process is simple and straightforward. In this article, we’ll show you how to clean the nib, converter, and exterior of your prized pen, plus the best way to store it. The pen is mightier than the sword, so you’ll want to keep yours looking sharp!

Things You Should Know

  • Take the pen apart and flush the nib with cool water. Soak it in diluted ammonia and water overnight, then air dry.
  • Drain excess ink from the converter and fill it with cool water, then shake it and pour the water out. Repeat until the water runs clear.
  • Polish the outside with a soft cloth, or use silver polish for silver pens. Store upright with the cap on.
Part 1
Part 1 of 4:

Cleaning the Nib

PDF download Download Article
  1. Clean the pen if you are refilling the ink for the second time. Fountain pens need to be cleaned periodically to ensure that they will work optimally. When you replace the cartridge every second time, it’s time to clean your pen. The same goes for refilling the ink bottle; if you’ve refilled the bottle twice, it’s time to clean the pen.
  2. A fountain pen has several different parts that will need to be disassembled in order to clean the pen thoroughly. Unscrew the pen grip from the barrel.
    • Take care with the ink cartridge if your pen has one. The ink cartridge is for one-time use and is punctured to release ink into the nib. Since the ink cartridge is punctured, it will leak ink if you turn it upside down. Keep it upright. You might want to use a pen cup or other holder to temporarily store the cartridge while you clean your pen. [1]
    • If your pen has a converter, remove the converter from the pen assembly. A converter is a reusable reservoir for ink. It can be refilled with bottled fountain pen ink.
    Advertisement
  3. The nib is the part of the pen that you write with. Ink runs from the ink cartridge or converter through the nib onto paper. Run cool water through the nib. You can either use your faucet (running it lightly) or a syringe that will inject a small amount of water through the nib. [2]
    • Run the water through the nib until the water runs clear.
    • Use cool water only. Do not use hot or warm water or alcohol to clean a fountain pen. Doing so can damage the inner workings of the pen. Instead, make sure you have clean, cool water. Distilled water usually works best.
  4. If your pen has a lot of dried ink that won’t break up with water, you can use an ammonia mixture to loosen the ink. Add one teaspoon of household ammonia to a cup of water. Ammonia will help break up dried ink and any other dirt that may have gotten into the nib. Put the nib in the mixture. Soak it overnight. [3]
    • You can also use vinegar instead of ammonia. Use one teaspoon of vinegar with one cup of water.
    • Do not use ammonia on Wahl Eversharp pens from the 1920s and 1930s. Likewise, don’t use ammonia to clean a pen with aluminum parts. These pens will be damaged by the ammonia.
    • Do not use any cleaners or soaps on your pen. These will damage your pen.
    • Do not soak nitrocellulose pens in ammonia, as the ammonia will discolor the pen’s covering
  5. Shake the nib a few times to get any excess water out. Then leave it out for several hours (or overnight) to allow it to air dry.
    • You can rest the nibs upright on top of a paper towel. The paper towel will help wick away moisture from the nib as it dries overnight.
  6. Advertisement
Part 2
Part 2 of 4:

Cleaning the Converter

PDF download Download Article
  1. Take the pen apart so that the converter is removed from the rest of the pen.
  2. Take care that the ink doesn’t spill where you don’t want it (on the table, floor or your clothes). Pour the excess ink into the garbage or into a paper towel.
  3. Running cool water through the converter will dislodge any ink particles and clear it out. You can either use a syringe that will allow you to run water through the converter, or you can use the faucet.
    • If you run water through the converter with the faucet, be sure to run the water very lightly. Otherwise, water can get behind the piston seal in the converter and may create a moldy-looking blob of ink that is difficult to remove.
  4. Cover up the end of the converter with your finger. Give the converter a good shake in order to break up any remaining ink that is inside the converter.
  5. Run cool water through the converter again until the water runs clear.
  6. Set the converter upright on top of a paper towel and let it air dry overnight.
  7. Advertisement
Part 3
Part 3 of 4:

Polishing the Outside

PDF download Download Article
  1. For pens that are made of silver, sterling silver, or plated silver, use a polishing cloth with a little dab of silver polish.
    • If your pen has etching on it, you can use some silver polish with a toothbrush. This will work the silver polish into the grooves of the etching.
  2. Many fountain pen exteriors are made of platinum, palladium, stainless steel or chrome. These metal finishes can be buffed with a soft cloth. [4]
  3. Older pens may have a celluloid finish, which is a finish that predates modern plastic. Just use a soft cloth to clean the celluloid. If your pen has a lacquer or painted surface, use a soft cloth to clean it. Do not use any chemical or abrasive cleaners on this pen, as these will damage the finish. Fine resin finishes can be vulnerable to cracks and scratches. Use a soft cloth to clean these types of finishes.
  4. Advertisement
Part 4
Part 4 of 4:

Storage

PDF download Download Article
  1. When you are not using your pen, keep the cap on it. This will prevent your pen from drying out.
  2. If you leave your fountain pen lying down, the ink will dry up in the nib.
  3. If you are planning to store your pen for longer than about a week, you should remove the ink so that it doesn’t dry up. Remove the ink cartridge and clean out the nib. Allow the nib to dry fully before storing the pen. Then you can store this pen in a pen case.
    • If you leave the ink in the pen, the ink’s acids will mix with oxygen and start oxidizing the nib. [5]
  4. Pen cases are intended to allow pens to lie flat. This is not beneficial for pens that have ink in them, since it will allow the ink to settle in the nib. Use these pen cases if you have already removed the ink, or if the pen is brand-new and you haven’t installed an ink cartridge yet.
  5. Advertisement

Community Q&A

Search
Add New Question
  • Question
    Should I have the pen with the cap pointing up (as in the picture) or with the cap pointing down?
    Community Answer
    It is better to keep pointing the cap upwards so it will prevent the excess ink from flowing inside the cap.
  • Question
    How do I replace nibs?
    Pascal Leers
    Community Answer
    That depends on the brand and model. For example, with an Lamy (Safari or AL-star), you can pull out the nib and push a new one in without removing the feed. With most Pelikan pens, you can screw out the nib and feel and screw in another one. With some pens it's very difficult to replace the nib yourself.
  • Question
    What sort of vinegar should I use instead of ammonia?
    Community Answer
    White vinegar is a well-known for its cleaning agent properties. It may be used to clean mineral deposits in coffee makers, for example. As such, it'll help to clean a fountain pen also. The cheap stuff is fine.
See more answers
Ask a Question
      Advertisement

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Thanks for submitting a tip for review!
      Advertisement

      About This Article

      Article Summary X

      To clean a fountain pen, start by taking the pen apart and placing the nib under cool running water until the water runs clear. Then, shake out the excess water and let the nib dry for several hours. In order to clean the converter, dump out the excess ink, then flush it out with cool running water and let it dry overnight. Finally, clean the outside of the pen by buffing it with a soft cloth, or with a toothbrush and silver polish if your pen is made of silver. To learn more, like how to keep the ink from drying out in your fountain pen, read on!

      Did this summary help you?
      Thanks to all authors for creating a page that has been read 121,837 times.

      Reader Success Stories

      • Andy Payne

        Aug 3, 2016

        "I love writing with a fountain pen but my favourite Cross Pen had become scratchy. I had tried cleaning it before ..." more
      Share your story

      Did this article help you?

      Advertisement