How to Clean a Toilet Brush & Holder

Download Article

Easy, low-hassle ways to clean and disinfect your toilet brush

Co-authored by Michelle Driscoll, MPH and Aly Rusciano

Last Updated: April 29, 2024 Fact Checked

Download Article

Spraying with Disinfectant

|

Soaking in Bleach

|

Using Natural Products

|

How Often to Clean

|

When to Replace

|

General Toilet Brush Care

You might think your chores are done once the toilet is clean, but what about your handy toilet brush? It may not look very dirty, but a lot can hide between those bristles. In this article, we'll walk you through how to clean and disinfect your toilet brush and its holder using disinfectant cleaners and natural products. If you want a brush that sparkles as much as your freshly cleaned porcelain throne, keep scrolling!

Best Way to Clean Toilet Brushes

Spray the toilet brush with an all-purpose disinfectant, then let it rest over the toilet bowl for 10 minutes before rinsing it off. Alternatively, add 2-3 caps of bleach to the toilet bowl and soak the brush in the bleach for 1 hour.

Section 1 of 6:

Spraying with Disinfectant

Download Article

1
Spray the toilet brush thoroughly with an all-purpose disinfectant . Once you’ve cleaned your toilet , hold the toilet brush over the toilet bowl and spray it with a disinfectant of your choice. Rotate the brush as you spray to ensure every bristle gets coated in cleaner. ^{[1]
X
Research source}
- The type of disinfectant spray is entirely up to you. You could use the same cleaner you use to clean the toilet or a squirt of hydrogen peroxide. ^{[2]
  X
  Research source}
2
Place the brush handle under the toilet seat for 10 minutes. After the brush has been coated in disinfectant, shut the toilet lid on top of the brush’s handle. This will hold the brush in place over the toilet bowl so it can dry, allowing any excess disinfect to drip into the toilet. ^{[3]
X
Research source}
- You can also dry the brush over a sink or tub. However, if you decide to do this, clean the sink and tub thoroughly afterward.
Advertisement
3
Run the brush under hot water. When the 10 minutes of drying time are up, rinse the brush in hot water to remove any lingering disinfectant, debris, and bacteria. Keep the brush under the running water until the water coming off the brush is clear. ^{[4]
X
Research source}
- Make sure to disinfect whatever you clean the toilet brush in, such as a sink or tub.
- Allow the brush to dry over the toilet for another 10 minutes. Putting a wet brush back in the holder could cause mold. ^{[5]
  X
  Research source}
4
Spray the brush holder with disinfectant and rinse with hot water. As you wait for the toilet brush to dry, coat the inside of the toilet brush holder with the same disinfectant you used before. Let the disinfectant soak for about 10 minutes before rinsing the holder with hot water. ^{[6]
X
Research source}
- Place the holder on a clean towel to air-dry.
- Once the brush and holder are completely dry, put them back together and return them to their spot in the bathroom.

Section 2 of 6:

Soaking in Bleach

Download Article

1
Add 2 to 3 capfuls of bleach to a clean toilet bowl. Clean your toilet thoroughly. Then, add around 3 capfuls of bleach to the water in the bowl. ^{[7]
X
Research source}
- Read the back of your bleach bottle. If it gives you specific instructions about how much to use, follow them.
- For a deeper clean, consider filling a bucket with hot water and bleach and submerging the brush and holder in the solution.
2
Submerge the brush in the bleach water for 1 hour. Drop the head of the brush into the toilet bowl, being careful not to splash. Leave the brush in the bleach solution for at least 1 hour. ^{[8]
X
Research source}
- Wear gloves and, if available, a disposable plastic apron to ensure you don’t get bleach on your skin or clothes.
Keep the brush under the water for at least 30 seconds. ^{[9]
X
Research source} The hot water decomposes the active ingredient in bleach, making it safe for you to touch the bristles. ^{[10]
X
Research source}
Set the brush on a towel to air-dry. Don’t store it until it’s completely dry, as storing a wet or damp brush can cause bacteria to grow. ^{[11]
X
Research source}
Even if you don’t use your toilet brush that often, the brush can still host bacterial growth and collect filth. It’s a good idea to deep clean the brush monthly to prevent this. ^{[12]
X
Research source}

Section 3 of 6:

Using Natural Products

Download Article

Clean the toilet bowl, and then pour 1 cup (240 mL) of vinegar into the clean toilet water. Then, submerge the brush in the solution. Leave it in the solution for at least an hour or overnight, and then remove with gloves. ^{[13]
X
Research source}
2
Scrub the brush with 2 grams (0.071 oz) of baking soda. Sprinkle the baking soda over the surface area of the brush. Then, use a separate cleaning brush to scrub the baking soda all over the toilet brush, making sure to get in between all the bristles. ^{[14]
X
Research source}
- If the brush holder has stubborn stains or grime, spray it with a vinegar-water solution, sprinkle it with baking soda, and scrub it down.
- While this step isn’t necessary, it’s helpful to get an even deeper clean.
Rinse off the baking soda and grime with hot water. Make sure to keep the brush under the water for at least 30 seconds to kill any remaining bacteria. ^{[15]
X
Research source}
Storing a damp or wet brush can cause bacteria and mold to grow. So, make sure it’s completely dry before storing it. ^{[16]
X
Research source}

Section 4 of 6:

How often should you clean a toilet brush and holder?

Download Article

Clean a toilet brush and holder after every use or once weekly. Experts recommend cleaning your toilet brush and holder as often as possible. The moist environment inside the holder is a breeding ground for mold and bacteria, so it’s best to clean it after every use to prevent mold from growing. If you can’t clean it after every use, aim to clean it at least once a week. ^{[17]
X
Research source}
- A deeper clean may not be necessary after each use, so use a spray disinfectant to sanitize the brush quickly. Then, give the brush and holder a deeper clean in a bleach or vinegar solution once a month.

Section 5 of 6:

When should you replace a toilet brush?

Download Article

Replace a toilet brush every 6 months. Most experts suggest getting a new toilet brush every 6 months; however, others argue that you can go longer if you clean it regularly. Use your best judgment on when to replace yours. If the bristles are discolored or misshaped, it’s likely time for a new brush. ^{[18]
X
Research source}
- Keep in mind that plastic toilet brushes and holders have shorter lifespans and may need to be replaced more regularly.

Section 6 of 6:

General Toilet Brush Care

Download Article

Keeping your toilet brush and holder clean doesn’t always have to be a chore! Follow these tips and tricks to maintain your brush and ensure it stays in the most pristine condition:
- Rinse the brush in clean toilet water after each use.
- Ensure no water is on the inside of the holder to prevent bacteria growth.
- Invest in a holder that keeps the brush's bristles off the bottom to prevent bent bristles and bacteria.

Expert Q&A

Search

Add New Question

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Tips

Clean your plunger when you clean your toilet brush to sanitize your bathroom space further. Simply twirl the plunger in a bleach solution, rinse, and air-dry. ^{[19]
X
Research source}

Thanks
Helpful 0 Not Helpful 0

Submit a Tip

All tip submissions are carefully reviewed before being published

Name

Please provide your name and last initial

Submit

Thanks for submitting a tip for review!

Warnings

Never mix vinegar with bleach or ammonia with bleach. They can create toxic fumes.

Thanks
Helpful 9 Not Helpful 1
Bleach is dangerous. Keep it away from children. Do not get it on your skin or in your eyes. ^{[20]
X
Research source}

Thanks
Helpful 0 Not Helpful 0

[1]

[2]

[3]

[4]

[5]

[6]

[7]

[8]

[9]

[10]

[11]

[12]

[13]

[14]

[15]

[16]

[17]

[18]

[19]

[20]

Log in

How to Clean a Toilet Brush & Holder

Best Way to Clean Toilet Brushes

Steps

Spraying with Disinfectant

Soaking in Bleach

Using Natural Products

How often should you clean a toilet brush and holder?

When should you replace a toilet brush?

General Toilet Brush Care

Expert Q&A

Tips

Warnings

You Might Also Like

References

About This Article

Reader Success Stories

Did this article help you?

Quizzes

You Might Also Like

Featured Articles

Trending Articles

Featured Articles

Featured Articles

Watch Articles

Trending Articles

Quizzes

Explore Categories