Download Article
Download Article
Showing your acoustic guitar some love by cleaning it regularly will keep it looking beautiful and new. Sure, you could just wipe down your guitar with a cloth whenever it looks dusty, but this article will teach you how to perform a thorough, deep cleaning that will really make your instrument shine. Below we break down exactly how to deep clean your guitar step by step, including which products you should (and definitely shouldn’t) be using.
Steps
-
Gather materials. You’ll need a few things to effectively clean your guitar. Gather up two soft cloths (you can use an old shirt, or even buy a cloth made especially for this), a spray bottle containing a bit of detergent and water, lemon oil, guitar polish, something pointy (like needle-nose pliers or a pen), and if your guitar has a shiny finish, a buff cloth.
-
Unstring the guitar. Loosen the strings by rotating the tuning heads “backwards,” as if you were tuning to a deeper pitch. Do this until the string is as loose as it can go. Next, remove the pin for that string from your bridge. If you have a string-winding tool, you can use the edge to get underneath the pin and help guide it out. Finally, pull out the string. Repeat this for all six strings. [1] X Research source
- When this has been done to all the strings, take the bridge pins, and put them somewhere safe.
- After you removed the strings, you can throw them away, or clean them and reuse them.
Advertisement -
Dust your guitar. Using one of your soft cloths, remove dust from the body and neck of your guitar. Be sure to wipe down the front, sides, and back. Use a gentle motion.
- You'll want to perform a thorough dusting of your guitar every time you change your strings, or roughly every 1-3 months with regular play.
-
Remove dust from creases. Using a pointer finger beneath your soft cloth, apply some elbow grease to any creases on the guitar. This includes: around the pick-guard, around the bridge, and where the headstock meets the neck. Remove any dust that may be lingering in these areas. [2] X Research source
-
Wipe off your tuning keys. Take your soft cloth and gently wipe off each of your tuning keys. If your tuning keys seem especially dirty or oily, you can spray a bit of detergent water onto a cloth and wipe off your tuning keys with that. [3] X Research source
- Another option is to use a bit of window cleaner on a soft cloth to clean tuning keys.
Advertisement
-
Deep clean along frets. Take your “pointy item” (such as open needle-nose pliers or a pen) and wrap your soft cloth around the point. Scrape your new tool across each fret, starting at the base of the headstock and moving down. This cloth-covered sharp edge will remove stubborn dirt from each fret’s edge. [4] X Research source
- You'll want to give your guitar an extra deep cleaning at least twice a year.
-
Oil your fretboard. Grab your second soft cloth and your lemon oil. Apply a few drops of oil to your cloth. Then, using a circular motion, begin oiling your fretboard. Begin near the headstock and make your way down. You’ll want to do this at least couple of times per year. [5] X Research source
-
Oil your bridge. Using your lemon oil and the same cloth, apply some oil to your bridge. Once again, use a circular motion. The oil should absorb right into the wood. If there is any excess oil left on your bridge, simply wipe it off with the dry side of your cloth. [6] X Research source
-
Inspect your bridge. Locate a thin piece of paper. Then, take a look at your bridge. Try to insert the paper underneath the bridge, even if it's only the corner. Ideally, you won’t be able to. However, if you can, it means that your bridge is slowly coming off. If you find yourself in this situation, locate a luthier (or stringed instrument specialist) and invest in getting your guitar fixed.
-
Clean with detergent. If your guitar is particularly dirty, you may want to use a bit of soap. Grab your spray bottle with mild detergent in water. Then, moisten your dusting cloth. Do not spray the guitar directly, as the idea is to use as little water as possible. Use this moist cloth to wash off any dirt from your instrument. [7] X Research source
-
Polish the body. There are numerous guitar polishes on the market. Essentially, there are three types: water-based cleaners, creamy cleaners with fine abrasives, and oils. Select any of these, and apply a small amount to your soft cloth. Then using a soft, circular motion, gently oil the front, sides, and back of your guitar. Use only a small amount of oil. You will want it to absorb into the wood.
- Look for a polish made for your guitar. Different formulas exists for wood and lacquer finishes.
- There are special polishes designed to remove cigarette smoke residue.
- You can search for your model number online to get more details on your guitar’s specifics and find out the best product to use.
-
Finish with a “buff cloth.” If your guitar has a matte finish, simply do a final wipe down with your soft cloth to absorb any excess oil. However, if your guitar has a shiny finish, you will want to follow up with a buff cloth. Using your buff cloth in a circular motion, you will polish your guitar to a beautiful shine. Do this on the front, back, and sides.
-
Look for cracks in your finish. As you polish your guitar, inspect the finish for any imperfections. If you happen to spot any cracks, take your guitar to a repair-person as soon as possible. This will prevent a tiny ding from transforming into an unsightly spider pattern. [8] X Research source
Advertisement
-
Insert the new string. Slip the ball end of a new string into the appropriate hole in your bridge. Then, insert a pin into the hole. Be sure the groove in the bridge pin is facing the sound hole of the guitar. Do not allow the ball end rest on the tip of the pin, otherwise it will work itself loose.
- Push the pin into place while also pulling on the string (with your other hand). You will feel the string and pin snap into place.
-
Thread the string. Thread the other end of your string into the appropriate slot on the tuning post. Push the string approximately three inches through the post, and tighten. The string should be pulled in the direction of the bridge.
-
Wind the string. Begin winding the string with your string-winder (or twist the tuning key). You will want 4-5 neat windings on the post with no overlaps. Repeat this method with the five other strings.
-
Tune your guitar. Using an electronic tuner, tighten each string until it plays the proper note. This will ensure that your guitar is ready to be played next time you pick it up. If you are a seasoned musician, you will be able to tune your guitar by ear.
-
Put your guitar away. You may be tempted to keep your guitar out on display, but the most effective way to keep your guitar clean and healthy is to put it away in a hard case. This will extend the life and vitality of your instrument for many years.
Advertisement
Expert Q&A
Search
-
QuestionWhat household items can I use to clean my acoustic guitar?Carlos Alonzo Rivera is a guitarist, composer, and educator based in San Francisco, California. He holds a Bachelor of Arts degree in Music from California State University, Chico, as well as a Master of Music degree in Classical Guitar Performance from the San Francisco Conservatory of Music. Carlos specializes in the following genres: classical, jazz. rock, metal and blues.You can use lemon juice and olive oil to clean the fretboard, but avoid using abrasive or corrosive cleaners on the body of your guitar. There are also guitar cleaning kits you can buy online or at a music shop.
-
QuestionCan I clean my guitar when it is still strung?Community AnswerYou can. Get a duster or a rag and just run it under the strings, taking care not to put any upward force on the strings. It may be easier to loosen the strings before cleaning.
-
QuestionCan I use anything else besides lemon oil?Community AnswerBaby oil and olive oil are alternatives that work well. Vaseline is not recommended as it can damage the fretboard with constant use.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Video
Tips
- If you want, buy a polish for the guitar, or even high-grade carnauba wax, and apply this. It will help sustain the finish.Thanks
- Between big cleaning sessions, it's not a bad idea to wipe down your guitar from time to time, too, even with the strings still attached.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
Things You'll Need
- 2 smooth cloths
- A buff cloth
- Spray bottle with detergent and water
- Guitar polish
- A bridge tool
- Guitar case
- New strings
- A string-winder with wire cutter
References
- ↑ https://www.youtube.com/watch?v=W67t0Ieu9f4&ab_channel=iVideosongsbySongmaster.com
- ↑ http://www.gibson.com/News-Lifestyle/Gear-Tech/en-us/How-to-Clean-Your-Guitar-for-Better-Tone.aspx
- ↑ http://www.gibson.com/News-Lifestyle/Gear-Tech/en-us/How-to-Clean-Your-Guitar-for-Better-Tone.aspx
- ↑ https://www.youtube.com/watch?v=W67t0Ieu9f4&ab_channel=iVideosongsbySongmaster.com
- ↑ https://www.youtube.com/watch?v=ulXQh9i4jtE&ab_channel=MarkTheGuitarGuy
- ↑ https://www.youtube.com/watch?v=ulXQh9i4jtE&ab_channel=MarkTheGuitarGuy
- ↑ http://www.frets.com/FretsPages/Musician/GenMaint/Cleaning/cleaning01.html
- ↑ http://www.dummies.com/how-to/content/how-to-clean-your-guitar.html
- Videos provided by Elixir Strings
About This Article
Thanks to all authors for creating a page that has been read 65,731 times.
Advertisement