Download Article
Download Article
If your iron has clogged vents or sprays rusty water on your clothes, this usually means that the minerals in tap water have clogged and corroded the iron’s water reservoir. The steam vents and surface may also be clogged with minerals or rust. You can easily clean your iron using some vinegar to unclog the reservoir and remove residue on the soleplate, which is the metal surface.
Things You Should Know
- Loosen white residue in the holes of the soleplate with a toothpick, toothbrush, or cotton swab.
- Fill the water reservoir with a water- vinegar mixture. Heat up the iron and press the "steam" button for 20-30 seconds. Repeat until steam flows freely.
- Apply a baking soda-vinegar paste to the soleplate and scrub gently using circular motions. Then, rinse the soleplate with clean water.
Steps
-
Unplug and cool the iron. Before you begin, make sure the iron is unplugged. Allow it to cool off completely before you start. This can ensure you don’t burn or electrocute yourself when adding the vinegar. -
Inspect the steam ducts. Check for white residue in the holes, or steam ducts, on the iron’s soleplate. Remove any residue you see using a wood or plastic toothpick, toothbrush, or cotton swab. This can help your vinegar mixture better clean the reservation and its ducts onto the plate. [1] X Research source- Avoid using anything metal to remove residue because this can scratch the iron’s surface.
Advertisement -
Fill the water reservoir with vinegar mixture. Mix one quarter cup (60ml) white vinegar and ¾ cup (180ml) distilled water in a cup with a spout. [2] X Research source With the iron upright, pour this mixture into the water reservoir until it is about one-third full.
- Use a larger amount of distilled white vinegar or only vinegar for very clogged irons.
-
-
Press the steam button. Now it’s time to really let the vinegar work its magic. Push down on the steam button and hold it for 20-30 seconds. Repeat at least 6 times, or until the steam flows freely from your iron. [5] X Research source
-
Empty the iron. Unplug your iron again and let it cool off completely. Then pour out any remaining vinegar/water mixture. This ensures that you remove mineral buildup in the reservoir. [6] X Research source
-
Rinse the reservoir. Fill the reservoir with one cup (240ml) plain, distilled water. Turn on the iron again and hold the steam button again. This will clear any traces of remaining mineral deposits or vinegar.
Advertisement
-
Ensure the iron is unplugged and cool. Before you begin cleaning, make sure that your iron is unplugged and cooled off. This can ensure that you don’t burn or electrocute yourself while cleaning. -
Clear residue from steam ducts. White residue in the holes of the soleplate is often mineral deposit. Before you clean the soleplate, use a wood or plastic toothpick, toothbrush, or cotton swab to remove this. This allows the vinegar mixture to penetrate and clean the iron’s surface. [7] X Research source- Avoid using metal tools to clean visible deposits. This can scratch the surface of the iron.
-
Make a vinegar paste using salt or baking soda. Mix equal parts table or kosher salt or baking soda and distilled white vinegar. Stir them into a paste to scrub starch, mineral deposits, and or sizing residue from your iron’s soleplate.
-
Scrub the soleplate. Dip a clean, white cloth into the paste. Moving in circles, rub the mixture over the soleplate. Use slightly more pressure for heavily soiled soleplates.
- Scrub the steam duct opening with a dab of the paste on a cotton swab. This allows you to more effectively clear away any residue or deposits.
-
Rinse off the soleplate with plain water. Wet a separate clean, white cloth. Wipe the surface of the soleplate to remove the paste and any residue or deposits. Repeat scrubbing and rinsing as necessary to remove all of the buildup.
-
Avoid using harsh scrubs. Never scrub or rub your iron soleplates with a scouring pad, steel wool or abrasive cleansers. You should also gently scrub the surface. Doing this can ensure that you don’t scratch the surface, which can lead to rusting and further staining.
Advertisement
Community Q&A
Search
-
QuestionCan tap water be used instead of distilled water with white vinegar to clean the inside of an iron?Community AnswerYou could, but you risk mineral build-up inside the iron. Distilled water is my recommendation.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Tips
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
References
- ↑ https://www.realsimple.com/home-organizing/cleaning/laundry/clean-iron
- ↑ https://www.realsimple.com/home-organizing/cleaning/laundry/clean-iron
- ↑ https://www.realsimple.com/home-organizing/cleaning/laundry/clean-iron
- ↑ https://www.realsimple.com/home-organizing/cleaning/laundry/clean-iron
- ↑ https://www.thespruce.com/how-to-clean-an-iron-2146972
- ↑ https://www.realsimple.com/home-organizing/cleaning/laundry/clean-iron
- ↑ https://www.realsimple.com/home-organizing/cleaning/laundry/clean-iron
About This Article
Article Summary
X
Before you start cleaning your iron, make sure the iron is unplugged and allow it to cool completely. Once it's cooled completely, use a toothpick or cotton swab to remove any residue from the holes in the iron’s soleplate. Then, pour a mixture of distilled water and white vinegar into the water reservoir until it is about one-third full. Heat up the iron for five minutes, and then press the steam button for 20-30 seconds repeatedly until the steam flows freely. To clear out any remaining traces of vinegar, fill the reservoir with just distilled water and run the steam function again. For tips on how to remove residue on the soleplate of your iron, read on!
Did this summary help you?
Thanks to all authors for creating a page that has been read 96,862 times.
Reader Success Stories
- "I always love your articles. Thanks for saving the day every time."
Advertisement
85%
of readers found this article helpful
.
Click a star to add your vote
% of people told us that this article helped them.
"I always love your articles. Thanks for saving the day every time."
"Needed a reminder. Excellent instructions and I loved the video."
"Very clear instructions, thank you!"
