How to Safely Neutralize and Clean up Battery Acid

Clean nickel cadmium, alkaline, lead-acid, and lithium-ion acid leaks

Co-authored by Duston Maynes and Cheyenne Main

Last Updated: June 12, 2024 Fact Checked

Battery acid spills can seem scary, but with the right tools, you can get it cleaned up in no time. It’s important to wear gloves, safety goggles, and a face mask and identify the type of battery before cleaning up battery acid. Double-bag the battery and dispose of it at the appropriate recycling center, then follow these instructions to clean up the acid from lithium-ion, lead-acid, nickel cadmium, and alkaline batteries.

Cleaning up Lead-Acid or NiCd Battery Acid

Sprinkle the area liberally with baking soda until it stops fizzing. For larger spills, absorb any leftover material with clay or kitty litter, shovel it up, and double-bag it. For small spills, use a couple of paper towels to absorb the baking soda mixture and place them in a double bag.

1

Protect your hands and face.

Download Article

Battery leaks can contain caustic chemicals that irritate the skin, lungs, and eyes. Automotive repair specialist Duston Maynes recommends wearing safety goggles , a face mask , and rubber , nitrile , or latex gloves before you handle the battery or the leaked material. Open all the windows and doors and use a fan to ensure the area is ventilated. ^{[1]
X
Research source}
- If you get battery acid on your skin or in your eyes, rinse the area in lukewarm, gently flowing water for at least 30 minutes. Under running water, remove all contaminated clothing and accessories. ^{[2]
  X
  Research source}
- Acid leaks, typically from a car battery, are much more dangerous than alkaline battery leaks.

2

Determine the battery type.

Download Article

Most batteries for cars and other motor vehicles are lead-acid batteries. ^{[3]
X
Research source} Smaller batteries that slot into electric devices are more varied, so examine the label to find the type. The most common types for small batteries are alkaline, lithium, and nickel-cadmium (NiCd). ^{[4]
X
Research source}
- Size and shape alone are not reliable identification methods.
- If the only label is the voltage display (V), you can make an educated guess: ^{[5]
  X
  Research source}
  - Nickel cadmium (NiCd): 1.20V or 1.25V.
  - Alkaline batteries: 1.50V.
  - Lead-acid batteries: 2 to 2.10V.
  - Lithium-ion batteries: 3.60V to 3.70V or higher.

3

Remove and dispose of the battery.

Download Article

Double-bag small batteries separately in small plastic bags. Put car batteries and other large batteries inside two trash bags, ideally made from 6mm+ (0.2 in) thick polyethylene . Tie or seal the bag closed immediately. ^{[6]
X
Research source} In some places, you can dispose of alkaline batteries in the trash, but most other batteries are required to be recycled by law. ^{[7]
X
Research source}
- Visit earth911's online tool to find a nearby hardware store or other location that will recycle your type of battery. ^{[8]
  X
  Trustworthy Source
  United States Environmental Protection Agency
  Independent U.S. government agency responsible for promoting safe environmental practices
  Go to source}
- Lithium-ion batteries can explode or catch fire, so they cannot be placed in household garbage or recycling bins. ^{[9]
  X
  Trustworthy Source
  United States Environmental Protection Agency
  Independent U.S. government agency responsible for promoting safe environmental practices
  Go to source}
- Some battery manufacturers may offer you a free or reduced-price replacement battery in exchange.

4

Wipe up lithium spills with water.

Download Article

For lithium-ion batteries, like cell phone batteries or "button" batteries, place the bag in a non-metal, leak-proof container. ^{[10]
X
Research source} Any electric device exposed to the leak is no longer safe to use. Throw the device away, and clean up spills with water and a soft cloth.
- If you have access to a lithium spill kit , neutralize the material with the absorbent material and neutralizing agent, put the absorbent into a sealable bag, and clean the area with water. ^{[11]
  X
  Research source}
- Alternatively, clean the area with an ammonia-based cleaner . ^{[12]
  X
  Research source}

5

Neutralize lead-acid or nickel-cadmium spills with baking soda.

Download Article

These types of batteries leak a strong acid, which can eat through clothing, carpet, or even metal. Cover the area liberally with baking soda. The acid is neutralized when the baking soda stops fizzing. Absorb the leftover material with clay or kitty litter and shovel it all into a doubled trash bag. ^{[13]
X
Trustworthy Source
US Occupational Safety and Health Administration
U.S. government agency responsible for setting and enforcing workplace safety standards
Go to source}
- If the battery is broken or damaged, sprinkle a liberal amount of baking soda inside the double bag containing it.
- If there’s acid on surfaces around the battery, you may need to use a wire brush to scrub it off. Use an absorbent microfiber cloth to dry the area once the corrosion is gone.
- Make sure you have gloves and a face mask on before tackling one of these spills.

6

Clean up alkaline spills with mild household acid.

Download Article

For alkaline batteries, dip a cotton swab in vinegar or lemon juice and apply a few drops to the affected area. ^{[14]
X
Research source} Use a cotton swab dipped in 90 to 99% isopropyl alcohol to remove residue. Wipe the area with a microfiber cloth, then let the device dry for several hours. ^{[15]
X
Research source}
- Although the potassium hydroxide that leaks from alkaline batteries is often called “battery acid,” it’s actually a base on the pH scale, meaning it’s best neutralized with an acid. ^{[16]
  X
  Research source}
- Use a toothbrush or toothpick to scrape off lingering corrosion in the battery compartment and contacts. For heavy corrosion, use fine sandpaper, an emery board, or a small screwdriver to gently scrape off the residue. ^{[17]
  X
  Research source}

Video

Community Q&A

Search

Add New Question

Question

Is rubbing alcohol okay for alkaline battery spills? A tech friend once advised this.

Community Answer

It's better to use vinegar or lemon juice; you want a mild acid to neutralize the alkaline substance.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 2 Helpful 18
Question

I have an old battery box from an electric forklift that is very corroded from the old batteries. Can I clean this and use in an a pot for a flower garden or vegetables?

Community Answer

Is not a good idea, because the box can still contain some pollutant leaked by the battery. Any kind of vegetables you put in can absorb those pollutants.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 6 Helpful 16
Question

How do I clean acid battery from a golf cart?

Community Answer

You can either get some battery acid cleaner at an auto parts store or mix some baking soda and water to use to clean the acid. Wash away the residue with water.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 37 Helpful 45

See more answers

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Tips

To prevent battery acid leaks in the future, make sure the batteries are properly installed, avoid mixing old and new batteries in the same device, and remove them if the device hasn’t been used for a long time. ^{[18]
X
Research source}

Thanks
Helpful 0 Not Helpful 0
Make sure to store batteries in a cool, dry location out of direct sunlight and use a rubber band to bundle multiple batteries so their terminals don’t touch.

Thanks
Helpful 0 Not Helpful 0

Submit a Tip

All tip submissions are carefully reviewed before being published

Name

Please provide your name and last initial

Submit

Thanks for submitting a tip for review!

Warnings

Large spills involving several liters (or gallons) of liquid or more should be handled by the fire department. Call an emergency number like 911 and keep everyone away from the area.

Thanks
Helpful 0 Not Helpful 0

Things You’ll Need

Rubber , nitrile , or latex gloves
Safety goggles
Chemical face mask
6mm+ (0.2 in) thick polyethylene trash bags or heavy-duty trash bags
Lithium spill kit (optional)
Ammonia-based cleaner (optional)
Baking soda
Microfiber cloth
Wire brush

You Might Also Like

[1]

[2]

[3]

[4]

[5]

[6]

[7]

[8]

Trustworthy Source

Go to source

[9]

[10]

[11]

[12]

[13]

[14]

[15]

[16]

[17]

[18]

Log in

How to Safely Neutralize and Clean up Battery Acid

Cleaning up Lead-Acid or NiCd Battery Acid

Steps

Protect your hands and face.

Determine the battery type.

Remove and dispose of the battery.

Wipe up lithium spills with water.

Neutralize lead-acid or nickel-cadmium spills with baking soda.

Clean up alkaline spills with mild household acid.

Video

Community Q&A

Tips

Warnings

Things You’ll Need

You Might Also Like

References

About This Article

Reader Success Stories

Did this article help you?

Quizzes

You Might Also Like

Featured Articles

Trending Articles

Featured Articles

Featured Articles

Watch Articles

Trending Articles

Quizzes

Explore Categories