Download Article
Download Article
If you're looking for instructions on how to connect PEX tubing to copper, you've come to the right place. In this article, we'll talk about three different connector options—crimp rings, expansion settings, and push-fit fittings. We'll explain how to choose an option based on your situation and budget, and then walk you through the process for each one. For a comprehensive guide on how to connect PEX to copper, keep reading!
Steps
-
Use crimp ring or cinch clamp fittings for a cheap way to connect the tubing. Crimp ring and cinch clamp fittings both consist of a band of metal that slips over the PEX tubing. You then compress the ring with either a crimp ring tool or a cinch clamp tool to secure the tubing to the fitting. [1] X Research source
- If you choose crimp ring fittings, you will need to purchase a kit that has different sizes of crimp ring tools for around $100 USD.
- If you use cinch clamp fittings, you can get a cinch clamp tool for about $40 USD.
- Crimp ring and cinch clamp fittings cost around $10 USD for a pack of 25-50.
Tip : Despite the fact that you need to purchase specialty tools to use these kinds of fittings, the fittings themselves are cheaper than all other types of fittings. This makes them a good choice if you need to make multiple connections of PEX to copper tubing.
-
Screw the threaded part of the fitting onto the copper pipe’s fitting. Select a threaded fitting that is either male or female, depending which type of fitting the copper tubing has. Screw it on clockwise to the fitting at the end of the copper pipe to create a watertight connection. [2] X Research source
- A male fitting refers to a fitting that inserts into the threads of the other end of the fitting and screws into them. A female fitting refers to one that covers the threads of the other end of the fitting and screws onto them.
- If the threads are on the outside of the copper pipe’s fitting, then you need a female fitting on the PEX. If the threads are on the inside of the copper pipe’s fitting, then you need a male fitting on the PEX.
Advertisement -
Slide the crimp ring or cinch clamp over the end of the PEX tubing. Place the ring or clamp over the end of the PEX that you want to connect to the copper tubing. Position it where the end of the tubing will cover the fitting. [3] X Research source
- Make sure that the end of the PEX tubing is cut squarely so it will fit evenly over the end of the fitting.
-
Insert the end of the PEX over the end of the fitting. Slide the end of the PEX tubing that has the crimp ring or cinch clamp on it over the end of the fitting that you screwed onto the copper tubing. Push it on as far as it will go. [4] X Research source
- Reposition the ring or clamp if needed by sliding it so it is about in the middle of where the PEX tubing covers the fitting.
-
Use the crimp ring or cinch clamp tool to compress the ring around the tubing. Put the crimp ring tool over the outside of the ring and squeeze the handles to crimp it around the PEX if you used a crimp ring fitting. Put the end of the cinch clamp tool over the tab of the clamp and squeeze the handles to tighten it if you used a cinch clamp fitting. [5] X Research source
- If you used a crimp ring fitting, you might need to work your way around the sides, squeezing the handles of the tool as you go, until you get a totally tight fit.
- The advantage of a cinch clamp over a crimp ring is that you just have to tighten it once.
Advertisement
-
Choose expansion fittings to connect the tubing without rings or clamps. Expansion fittings are a type of stab-in fitting that make a watertight connection with only the pressure of the PEX around it. They are more expensive than other types of fittings and you will need a PEX expander tool as well. [6] X Research source
- A PEX expander tool will set you back around $200 USD. They can range in price up to 4 times that much depending on the kit you want. Different kits come with more heads for different diameters of PEX.
- Expansion fittings cost about $20 USD for a pack of 5.
-
Screw a threaded expansion fitting onto the fitting at the end of the copper pipe. Choose a threaded fitting that is either male or female, depending which type of fitting the copper tubing has. Tighten it clockwise to connect it to the fitting at the end of the copper pipe. [7] X Research source
- Male fittings are narrower than female fittings and screw into female fittings. Female fittings are wider and screw on top of male fittings.
- If the threads are on the outside of the fitting on the copper tubing, then you need a female fitting on the PEX. If the threads are on the inside fitting on the copper tubing, then you need a male fitting on the PEX.
-
Use a PEX expander tool to expand the end of the PEX to insert the fitting. Insert the end of the tool (the cone-shaped tip) into the end of the PEX tubing. Pull the trigger on the handle to expand the tool and open up the end of the pipe enough that it will slide over the end of the fitting, then remove the tool. [8] X Research source
- The end of the PEX tubing needs to be cut squarely so it will fit cleanly over the end of the expansion fitting.
-
Insert the end of the PEX over the end of the fitting. Slide the PEX tubing over the expansion fitting and push it on as far as it will go. It will return to its original size and create a watertight seal around the fitting. [9] X Research source
- PEX has its own “memory”, meaning that it will return to its original diameter after it is stretched out.
Advertisement
-
Select push-fit fittings for a tool-free way to connect PEX to copper. Push-fit fittings don’t require any special tools to attach them. They are the most expensive of the fittings you can use to connect PEX to copper. [10] X Research source
- Despite being the most expensive, their ease-of-use makes push-fit fittings a good option when you only need to make a few connections of copper and PEX.
- Push-fit fittings cost at least $5 USD each.
Tip : Push-fit fittings are also a good option if your copper tubing doesn’t already have a threaded fitting at the end because they just push on to make the connection.
-
Insert the end of the PEX into one side of the fitting. Shove the end of the PEX tube into the fitting all the way. The internal mechanisms of the push-fit fitting will create a seal and hold everything in place. [11] X Research source
- As with other methods, you will need to make sure the end of the PEX tubing is cut evenly so it will fit cleanly into the end of the push-fit fitting.
-
Push the other end of the fitting onto the end of the copper tubing. Snap the open end of the push-fit fitting all the way onto the open end of the copper tubing until the copper pipe is all the way inside. The PEX and copper are now connected and you don’t need to do anything else. [12] X Research source
- Make sure that the end of the copper tubing is smooth around the edges before you insert it. You can sand around the end to remove any sharp edges.
- If the copper pipe has a threaded fitting attached to it, you will need to remove it first. You can cut the pipe just below it to make a new clean opening at the end.
Advertisement
Expert Q&A
Search
-
QuestionHow can I test for possible leaks?Greg Jeiranyan is a Licensed Plumber based in Los Angeles, California. With over 10 years of professional experience, Greg and his team specialize in residential and commercial plumbing service calls. His company, Plumbing Geeks, is rated 5 stars on Yelp and is a family-owned and operated plumbing company. Plumbing Geeks has been serving Los Angeles and its surrounding areas since 2021.You can use a mixture of soap and water and spray it on the pipe connection. If there are bubbles, then you have a leak. You could also buy some chemical sprays and liquids at your local hardware store that can detect leaks.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Tips
Submit a Tip
All tip submissions are carefully reviewed before being published
Thanks for submitting a tip for review!
Things You’ll Need
Using Crimp Ring or Cinch Clamp Fittings
- Crimp ring or cinch clamp fittings
- Crimp ring or cinch clamp tool
- PEX tubing
- Copper tubing
Attaching Expansion Fittings to PEX
- Expansion fittings
- PEX expander tool
- PEX tubing
- Copper tubing
Connecting PEX and Copper with Push-Fit Fittings
- Push-fit fittings
- PEX tubing
- Copper tubing
Expert Interview
Thanks for reading our article! If you’d like to learn more about plumbing, check out our in-depth interview with Greg Jeiranyan .
References
- ↑ https://www.familyhandyman.com/plumbing/pex-piping-everything-you-need-to-know/
- ↑ https://www.familyhandyman.com/plumbing/pex-piping-everything-you-need-to-know/
- ↑ https://www.familyhandyman.com/plumbing/pex-piping-everything-you-need-to-know/
- ↑ https://www.familyhandyman.com/plumbing/pex-piping-everything-you-need-to-know/
- ↑ https://www.familyhandyman.com/plumbing/pex-piping-everything-you-need-to-know/
- ↑ https://lifehacker.com/plumbing-101-pex-vs-copper-piping-1654828876
- ↑ https://www.bobvila.com/articles/connecting-pex-to-copper-or-pvc/
- ↑ https://www.bobvila.com/articles/connecting-pex-to-copper-or-pvc/
- ↑ https://www.bobvila.com/articles/connecting-pex-to-copper-or-pvc/
About This Article
Thanks to all authors for creating a page that has been read 61,890 times.
Advertisement
