How to Connect a DVD Player to a Laptop

Last Updated: January 2, 2024 Fact Checked

Unfortunately, you cannot just unplug a DVD player from your TV and plug it into your laptop to watch DVDs. This wikiHow will teach you how to connect a DVD Player to your laptop using an HDMI cable with a video capture card that plugs into your laptop's USB port. You can also purchase an external USB DVD drive and connect it to your laptop via USB.

Method 1

Method 1 of 2:

Connecting an External DVD Drive with USB

Download Article

1
Plug the cable into your DVD external drive. Some external drives might ship with a USB cord attached, but if not, you will need to plug in a USB cable to your external drive. You can find a plethora of USB DVD drives at any electronics retailer. ^{[1]
X
Research source}
- These are generally the cheaper option to buying a video capture card so you can use your TV's DVD player with your laptop. You'll buy a portable external drive that only works with a computer and can't be connected directly to a TV. ^{[2]
  X
  Research source}
- You should be able to read the manual that came with your external DVD drive If you're not sure what type of USB cable connects it to your laptop.
You'll most likely find a USB port on either side of your laptop.

Advertisement
A stretched cable could cause data interruption and not display a smooth video or audio track.
If your laptop is already powered on, you can skip this step.
5
Follow the on-screen instructions to download any drivers or software needed for the external drive. Once you have your laptop powered on and connected to the external drive, you might be prompted to download additional features. ^{[3]
X
Research source}
- You may be prompted to restart your laptop once these installs finish.

Method 2

Method 2 of 2:

Connecting a DVD Player with a Video Capture Card

Download Article

1
Connect the HDMI cable from your DVD Player into the capture card. This might be labeled "HDMI Out" on your DVD Player and "HDMI IN" on the video capture card. ^{[4]
X
Research source}
- Since your laptop most likely has an "HDMI Out" port only, you cannot run an HDMI from the "HDMI Out" port on your DVD Player to the "HDMI Out" port on your laptop. You won't see or hear your DVD since both the player and your laptop will be sending out/displaying information. In that case, you'll need a video capture card to connect the "HDMI Out" port from your DVD Player to an "HDMI In" port. These tend to be slightly more expensive than buying an external USB-DVD drive as outlined in the previous method.
2
Connect the USB cable to your laptop's USB port. You'll most likely find this rectangle-shaped port on either side of your laptop.
- Some video capture cards will have a USB attachment at the end opposite of where you plug in the HDMI cable. You'll want to plug this end into the USB port on your laptop.
3
Ensure that both connections are secure. A stretched cable could cause interruptions in your audio or video output, so make sure the cables between the DVD Player and the video capture card and between the capture card and your laptop aren't pulled too tightly.
- If they are loose, you might need to try using a different HDMI cable.
4
Test the connection. Put a DVD in the DVD player and start watching. If your sound or audio is off, you might have issues with your ports/cables. If this is the case, try using different cables.
- When you initially connect the capture card to your laptop, you'll most likely get a pop-up to install the software you'll need to use with the capture card.
According to the capture card you're using, you may need to open the capture card's software first to watch anything from your DVD Player. ^{[5]
X
Research source}