How to Easily Connect a Wireless Mouse to Your Computer

PDF download Download Article

Setup instructions for your wireless mouse

PDF download Download Article

Want to use a wireless mouse with your laptop or desktop computer? Whether you have a Bluetooth mouse or a radio frequency (RF) mouse with a receiver, connecting it to your computer will be quick and easy. Since there’s no cable, a wireless mouse is great for traveling or reducing clutter on your desk. This wikiHow guide will walk you through hooking up any wireless mouse to your Windows PC, Mac, or Chromebook.

Things You Should Know

  • If using a USB receiver, plug it in to your computer.
  • On Windows, turn on Bluetooth in the settings menu.
  • On Mac, turn on Bluetooth in the System Preferences menu.
Method 1
Method 1 of 6:

Wireless Receiver (Windows/Mac/Chromebook)

PDF download Download Article
  1. The receiver should fit into one of your computer's USB ports. You can typically find USB ports , which are thin, rectangular slots, on the sides of laptops and on the front of desktops' CPU boxes.
    • This method applies to Windows and Mac computers.
    • Plugging in the receiver before turning on the mouse will allow your computer to install any drivers or software needed to use the mouse.
  2. To add batteries, you'll typically flip the mouse over and remove a panel on the bottom, though some mice instead have their batteries in a compartment in the back of the mouse.
    • If you haven't used the mouse in several months, consider replacing the batteries even if they were new when you inserted them.
    • Some mice, such as the Apple Magic Mouse 2, require charging instead of new batteries.
    Advertisement
  3. This typically involves shifting or pressing a button on the bottom of the mouse, though you may need to look for the On/Off switch on the side of the mouse.
    • If you can't find the On/Off switch, consult your mouse's manual.
  4. This button's location will vary based on your mouse's developer, but you'll usually be able to find this button either between the two mouse buttons or on the mouse's side.
    • Some mice come listed as "plug and play", meaning that you don't need to manually connect them or download any software.
  5. Once you see the cursor begin to move on-screen, your mouse is connected. You’re ready to start using your computer mouse !
    • If your mouse doesn't start moving, try turning it off and then back on. If applicable, you may also want to change the USB port into which the receiver is plugged.
    • See our guide on how to extend the wireless range of a wireless mouse for more troubleshooting tips.
    6. Advertisement
Method 2
Method 2 of 6:

Bluetooth (Windows 11)

PDF download Download Article
  1. To do so, you'll need to locate the "On/Off" switch, which is typically found on the underside of the mouse, and slide it to the "On" position.
    • This method applies to Bluetooth wireless mice. If you have a wireless mouse that uses a USB wireless receiver, go to the wireless receiver method above.
    • If your mouse uses batteries, you should also make sure it has a fresh set. The battery compartment is also usually on the underside of the mouse.
  2. You can do so either by clicking the Windows icon in the bottom-left corner of the screen, or by pressing the ⊞ Win key on your computer's keyboard.
  3. Search for “settings” in the Windows search box, then select the Settings app.
  4. It’s in the sidebar.
  5. Click the switch next to “Bluetooth” so that it says “On.”
  6. This button is at the top of the Bluetooth & devices page, and has a large plus sign.
  7. It's the first option at the top of the "Add a device" menu. This starts scanning for nearby Bluetooth devices.
  8. Most Bluetooth mouses have a pairing button that you must press and hold for a second to make the mouse discoverable via Bluetooth. Typically, an LED light will flash when the mouse is in pairing mode.
    • Consult the user manual to find out if your mouse has a pairing button and where it is located.
  9. When Windows detects the Bluetooth mouse, it appears in the list of devices in the "Add a device" window.
    • If the mouse doesn't appear, press and hold the pairing button on your mouse again. Then turn your computer's Bluetooth off and then on again.
  10. Doing so will add your mouse to your computer's Devices list, and you'll be able to use it without re-pairing it from then on.
    11. Advertisement
Method 3
Method 3 of 6:

Bluetooth (Windows 10)

PDF download Download Article
  1. To do so, you'll need to locate the "On/Off" switch, which is typically found on the underside of the mouse, and slide it to the "On" position.
    • This method applies to Bluetooth wireless mice. If you have a wireless mouse that uses a USB wireless receiver, go to the wireless receiver method above.
    • If your mouse uses batteries, you should also make sure it has a fresh set. The battery compartment is also usually on the underside of the mouse.
  2. You can do so either by clicking the Windows icon in the bottom-left corner of the screen, or by pressing the ⊞ Win key on your computer's keyboard.
  3. Click the Settings icon
    Windows Settings
    .     It's the icon that resembles a gear. It's near the bottom-left corner of the Start window.
  4. It's next to an icon that resembles a keyboard and an iPod. It's the second option in the Windows Settings menu.
  5. It's the first option in the left sidebar on the page.
  6. Doing so will enable Bluetooth on your Windows 10 computer.
    • If the switch is blue, Bluetooth is already on.
  7. It's the first button at the top of the "Bluetooth & Other Devices" menu. This displays the "Add a device" window.
  8. It's the first option at the top of the "Add a device" menu. This starts scanning for nearby Bluetooth devices.
    EXPERT TIP

    "Your computer will begin searching for a broadcast signal from the mouse, which allows you to pair the two devices."

    Spike Baron

    Computer Repair Technician
    Spike Baron is a Network Engineer & Desktop Support Expert based in Los Angeles, California. He is the owner of Spike’s Computer Repair. With over 25 years of working experience in the tech industry, Spike specializes in PC and Mac computer repair, used computer sales, virus removal, data recovery, and hardware and software upgrades. He has worked as an IT Systems expert for numerous companies, including Huntington Health, Blackbox, Honda, and Manufacturers Bank. In his spare time, Spike also builds and restores computers. He has his CompTIA A+ certification for computer service technicians and is a Microsoft Certified Solutions Expert.
    Spike Baron
    Computer Repair Technician
  9. Most Bluetooth mouses have a pairing button that you must press and hold for a second to make the mouse discoverable via Bluetooth. Typically, a light will flash when the mouse is in pairing mode.
    • Consult the user manual to find out if your mouse has a pairing button and where it is located.
  10. When Windows detects the Bluetooth mouse, it appears in the list of devices in the "Add a device" window.
    • If the mouse doesn't appear, press and hold the pairing button on your mouse again. Then turn your computer's Bluetooth off and then on again.
  11. Doing so will add your mouse to your computer's Devices list, and you'll be able to use it without re-pairing it from then on. [1]
    12. Advertisement
Method 4
Method 4 of 6:

Bluetooth (Mac)

PDF download Download Article
  1. To do so, you'll need to locate the "On/Off" switch, which is typically found on the underside of the mouse, and slide it to the "On" position.
    • This method applies to Bluetooth wireless mice. If you have a wireless mouse that uses a USB wireless receiver, go to the wireless receiver method above.
    • If your mouse uses batteries, you should also make sure it has a fresh set. The battery compartment is also usually on the underside of the mouse.
  2. It's the apple-shaped icon in the top-left corner of the screen. This displays the Apple menu.
    • If you see the Bluetooth icon in the top-right side of the menu bar, click it instead.
  3. This option is toward the top of the drop-down menu.
    • In macOS Ventura, this is called “System Settings.”
  4. It's a blue icon with the white Bluetooth symbol on it.
    • For macOS Ventura, Bluetooth is located in the sidebar.
  5. It's on the left side of the window. Doing so will enable your Mac's Bluetooth.
    • Alternatively, you can click the Bluetooth icon in the menu bar in the top-right corner. Then click Turn Bluetooth On in the Bluetooth menu.
  6. Most Bluetooth mouses have a pairing button that you must press and hold for a second to make the mouse discoverable via Bluetooth. Typically, a light will flash when the mouse is in pairing mode.
    • Consult the user manual to find out if your mouse has a pairing button and where it is located.
  7. Your Mac constantly scans for nearby Bluetooth devices. When one is detected, it appears in the list of devices in the Bluetooth window [2]
    • The Magic Mouse 2 must be turned on and then plugged into your Mac via its USB Lightning charger cable to pair.
  8. When you see the mouse appear in the list of Bluetooth devices, click Connect next to the device's name to pair your mouse. Once a connection is established, your mouse is ready to use.
    9. Advertisement
Method 5
Method 5 of 6:

Bluetooth (Chromebook)

PDF download Download Article
  1. To do so, you'll need to locate the "On/Off" switch, which is typically found on the underside of the mouse, and slide it to the "On" position.
    • This method applies to Bluetooth wireless mice. If you have a wireless mouse that uses a USB wireless receiver, go to the wireless receiver method above.
    • If your mouse uses batteries, you should also make sure it has a fresh set. The battery compartment is also usually on the underside of the mouse.
  2. It's in the lower-right corner of the screen.
  3. It's in the menu that appears when you click on the time in the lower-right corner of the screen. This will turn on Bluetooth and take you to a list of devices nearby. [3]
  4. If Bluetooth is not already turned on, click the switch at the top of the menu. This turns Bluetooth on and starts scanning for nearby Bluetooth devices.
  5. Most Bluetooth mouses have a pairing button that you must press and hold for a second to make the mouse discoverable via Bluetooth. Typically, a light will flash when the mouse is in pairing mode.
    • Consult the user manual to find out if your mouse has a pairing button and where it is located.
  6. This pairs your Chromebook with the mouse. Once a connection is made, your Bluetooth mouse is ready to use. [4] [5]
    7. Advertisement
Method 6
Method 6 of 6:

Bluetooth (Windows 7)

PDF download Download Article
  1. To do so, you'll need to locate the "On/Off" switch, which is typically found on the underside of the mouse, and slide it to the "On" position.
    • This method applies to Bluetooth wireless mice. If you have a wireless mouse that uses a USB wireless receiver, go to the wireless receiver method above.
    • If your mouse uses batteries, you should also make sure it has a fresh set. The battery compartment is also usually on the underside of the mouse.
  2. You can do so either by clicking the Windows icon in the bottom-left corner of the screen, or you can press the ⊞ Win key on your computer's keyboard.
  3. This option should be on the right side of the Start window, just below the Control Panel option.
    • If you don't see this option, type devices and printers into the "Search" field at the bottom of the Start window, then click Devices and Printers when it appears.
  4. It's in the top-left side of the Devices and Printers window.
  5. Most Bluetooth mouses have a pairing button that you must press and hold for a second to make the mouse discoverable via Bluetooth. Typically, a light will flash when the mouse is in pairing mode.
    • Consult the user manual to find out if your mouse has a pairing button and where it is located.
  6. It should appear in the window here.
    • If you don't see your mouse's name, your Windows 7 computer might not support Bluetooth. You can fix this by purchasing a Bluetooth adapter.
  7. This option is in the lower-right corner of the window. This will complete the Bluetooth connection process.
    • Wait for your mouse to finish connecting. This process may take a few minutes. Once it completes, you should be able to move the on-screen cursor with your mouse.
    8. Advertisement

Community Q&A

Search
Add New Question
  • Question
    What could cause my wireless mouse to stop working?
    Community Answer
    They all stop working eventually. Try unplugging and replugging the receiver if it has one, maybe into a different port. If it's a Bluetooth mouse, try turning Bluetooth on and off on your computer. Try restarting your computer. Try the mouse with a different computer and see if it works. Try replacing the batteries if possible. If you've done all this and it doesn't work, it's just time to replace your mouse.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 12 Helpful 31
  • Question
    Where is the connect button on a laptop for a wireless mouse when there is no USB key?
    Community Answer
    The mouse may be Bluetooth, in which case you'll need to determine if your laptop is Bluetooth-enabled. If so, go through the Bluetooth device connection wizard via Control Panel.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 15 Helpful 18
  • Question
    Do I need to pay money to do this?
    Community Answer
    Other than the cost of the mouse, you can install a wireless mouse by yourself and at no cost.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 24 Helpful 40
See more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      Advertisement

      You Might Also Like

      How to
      Use a Computer Mouse
      How to
      Clean a Mousepad: Fabric, RGB, & Plastic
      5 Ways to Use a Keyboard to Click & Move a Mouse on PC & Mac
      How to
      Use Your Computer Without a Mouse: Shortcuts & Mouse Keys
      Connecting a Logitech Wireless Mouse via Bluetooth or Receiver
      2 Ways to Pair a Logitech Mouse to a Unifying Receiver
      21 Reasons Why Your Mouse is Freezing (and How to Fix Them)
      How to
      Adjust Your Mouse Speed, Sensitivity, & More
      How to
      Replace Dead Batteries in an Apple Magic Mouse
      4 Quick Ways to Change Mouse Sensitivity on a Computer
      How to
      Extend Wireless Range of a Wireless Keyboard and Mouse
      The Fastest & Easiest Ways to Charge Your Apple Magic Mouse
      A Complete Guide to Optimizing a Mouse for Gaming
      10 Ways to Troubleshoot a Logitech Mouse
      Advertisement

      References

      1. ↑ https://support.microsoft.com/en-us/help/17156/windows-10-connect-to-bluetooth-devices
      2. ↑ https://support.apple.com/en-us/HT201171
      3. ↑ https://support.google.com/chromebook/answer/2587653?hl=en
      4. ↑ https://www.youtube.com/watch?v=Y3BWuHbsKAk
      5. ↑ https://www.google.com/intl/en_us/chromebook/howto/connect-to-bluetooth/

      About This Article

      Article Summary X

      1. Enable Bluetooth on your computer.
      2. Turn on the mouse.
      3. Put the mouse into pairing mode.
      4. Click Pair on the computer.

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 2,685,975 times.

      Reader Success Stories

      • Rey Flores

        Mar 4, 2017

        "Just curious about how things work, and that's why I always check and look for answers. I was given a wireless ..." more
      More reader stories Hide reader stories
      Share your story

      Is this article up to date?

      Advertisement