Download Article
Learn to create a slipknot and crochet a chain
Download Article
The chain stitch is the basic foundation of crochet and, luckily, it's very easy to make. We'll walk you through the steps to create a slipknot and crochet a chain so you can begin your crochet project perfectly, whether you're creating a blanket, scarf, or something else entirely. Read on for a beginner-friendly tutorial that will have you crocheting chains like a pro.
Starting a Crochet Chain
- Create a loop 4 inches (10 cm) from the end of your yarn.
- Insert your hook into the loop and catch a section of yarn.
- Pull the yarn through the first loop to make a new loop on the hook.
- Tighten the loop by pulling on the yarn’s free end.
- Yarn over the hook by passing the yarn over the hook from back to front.
- Catch the yarn with the end of the hook.
- Pull through the loop on the hook to create a new loop.
Steps
Section 1 of 3:
Creating a Slipknot
Download Article
-
Loop the yarn over your finger. Stick out your pointer finger so your nail is facing away from you and drape the end of the yarn over your finger. [1] X Research source Leave about 1-1.5 inches (2.5-3.8 cm) of yarn extending below your finger and let the rest of the yarn fall behind your finger.- Press your thumb on the same hand against your fingertip to hold the yarn in place.
- Your pattern will recommend a yarn weight and hook size, but worsted (or aran) weight yarn and a size H-8 (5 mm) hook in any material are good choices for beginners.
-
Create an X shape with the yarn. Grasp the yarn behind your finger with your free hand. Pull it toward you and then wrap it around your finger to make two loops. [2] X Research source Now, adjust the second loop you made so that it goes over the top of the first loop, forming a slanted X shape.- Once you've formed this X shape, hold the slack from the rest of the yarn in your middle and ring fingers on the same hand.
Advertisement -
Pull on the X "arm" to make a little slack. Locate the upper "arm" of the X closest to the end of your finger. It’s on the left if you made the loop on your right hand and the right if you made it on your left hand. Pinch this arm with your free hand and pull on it to make it slack.
-
Pull the back “arm” of the X through the slack to form a loop. Reach under the front arm and grab the other arm behind it. Pull the back arm under and through the front arm of the X to form another loop above your finger. [3] X Research source Once it's about as big as the loop on your finger, slide the whole thing off of your finger carefully.
- Try again if you don’t end up with a clear loop and a very open, loose beginning of a knot.
-
Pull on the yarn to adjust your loop. Hold the loop and pull the short end of the yarn to tighten the knot. Maintain a tail length of 1-2 inches (2.5-5 cm). Once the knot is tightened, slide it to create a bigger or smaller loop if necessary. Insert your crochet hook into the loop and pull the yarn to a comfortable tightness. [4] X Research source
- This is called a slipknot and is the basis for starting most crochet projects.
Advertisement
Section 2 of 3:
Crocheting a Chain
Download Article
-
Hold the hook with the yarn loop in front of you. Hold the crochet hook with the loop sitting about 1 inch (2.5 cm) below the curved end of the hook, pointing toward your other hand. The long end of the yarn should be behind the hook.
-
Pull the yarn up and over the hook. Grasp the long end of the yarn. Pull it up and over the top of the hook to yarn over . [5] X Research source The knot should remain below the hook, with the rest of the yarn in front of the hook.- In a crochet pattern yarn over is often abbreviated to YO.
- DIY Specialist and Maker Sarah Stearns recommends holding the yarn tight enough to keep its tension but loose enough to let it slide through your fingers while you crochet.
-
Catch the yarn with the hook. Move the hook forward and catch the yarn you used to yarn over. As you move the hook forward, twist it under the yarn and then back toward you. The yarn will now nest inside the curve of the hook.
-
Pull the yarn through the loop. Use the hook to pull the yarn through the slipknot loop. Make the new loop roughly the same size as the slipknot loop. This makes your first chain stitch . [6] X Research source Make the loop larger by gently pulling it with the hook. Make it smaller by tugging the long end of the yarn in the opposite direction.
- Crochet patterns often abbreviate chain as ch .
-
Repeat as many chain stitches as you need for the pattern. Continue yarning over and pulling it through the loop. Count each stitch until you have as many chains as you need for your project. If you follow a crochet pattern, the first line usually tells you the number of chain stitches you need.
- If you forgot to keep count as you went, lay the chain flat. You’ll see a series of V shapes. Each V is a single chain stitch. Count them to see how many stitches you made.
Advertisement
Section 3 of 3:
Continuing Your Crochet Project
Download Article
-
Tie off your chain to finish it. If you just want a crocheted chain, such as when you're making a bracelet, tie off your chain when it reaches the desired length. Simply clip the yarn at least 1 inch (2.5 cm) from your last stitch, catch the last remaining end with the hook, and pull it all the way through the loop. Give it a good tug to secure the end.
-
Change direction to start a new row. Each time you reach the end of a row, you must flip your crochet piece to start the next row. Flip your chain so you can work in the opposite direction. Before you start this new row, make a couple of extra chains (the number varies depending on the type of stitches in the new row). Chain these extra stitches, and then work your next row in the last chain stitch before the extras.
- As you make your way down the new row, work your stitches into the loops of the chain you made. Whether you work into the back hump or top loops of the chain depends on your project, so you'll have to follow your pattern .
- You’ll most commonly single crochet (abbreviated to sc) or double crochet (abbreviated to dc).
- Stearns advises that it’s best for beginners to start with small projects that are worked in flat rows.
-
Make a circle or loop to crochet in the round. After making your initial chain (usually 4 stitches), join the ends using a slip stitch (abbreviated to sl st). With the last loop of your chain on your hook, make a slip stitch by pushing the head of the hook into the very first stitch on your chain, making two "loops" on the hook. Grab the yarn with your hook, just as if you were chaining normally, and pull it through both loops. This will leave you with one loop on the hook, and you'll be ready to start your next "row." This forms the beginning of your circle.
- Work your stitches into the center of the loop to crochet a circle .
Advertisement
Community Q&A
Search
-
QuestionWhy is my chain loose?Community AnswerMake sure to pull the yarn tight enough so that it is snug to your hook, but not so tight that you can't get the yarn through. And make sure to keep the yarn tight and avoid loosening up as you go through the chain.
-
QuestionHow do I crochet an animal and make the joints?Community AnswerThere are lots of (free) patterns out there. Depending on the pattern, you can either increase and decrease as you go, or you work the parts separately and sew them together afterwards.
-
QuestionI'm reading a pattern in a crochet mag, and they say ch9 and then end it with (12). Am I to end up with 12 st from chaining 9? If so, how?T. ChinsenTop AnswererThe foundation row consists of the 9 ch stitches. 3 more ch are needed for the start of the next row. The additional stitches bring the total to 12 ch. The 3 ch represent a dc stitch, which is probably what will be worked on the foundation chain.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Video
Tips
- Hook size will impact the chain's tension; always comply with the suggested crochet hook size unless you're extremely confident with your crocheting skills and know what you're doing when making changes. It is advised that if your crochet style is "slack," then it's best to use a smaller hook, while if your crochet style is "tight," then consider a larger hook. This will become clearer to you as you practice.Thanks
- A set of asterisks in a crochet pattern simply means repeating the instructions between them. For example, *ch 3, dc in the next space between 3-dc groups; repeat from* to the end of the row.Thanks
- If the instructions are placed within parentheses, then all the instructions within the parentheses are worked together as one stitch. For example, (3 dc, ch 3, 3 dc) in ch 3 space.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
Things You'll Need
- Yarn
- Crochet hook
- Scissors
References
About This Article
Article Summary
X
To crochet a chain, start by draping the yarn over your finger, then pull the string towards you and wrap it round your finger so you have 2 loops. Next, push the second loop over the first to form an "x" shape before making another loop to finish the slipknot and removing it from your finger. To start crocheting, put the loop on the hook, pull the yarn up and over the hook, and pull the yarn through the slipknot loop to complete your first chain. Repeat this process until you have as many chain stitches as you need. To learn how to tie off your chain or change direction to start a new row, read on!
Did this summary help you?
Thanks to all authors for creating a page that has been read 348,233 times.
Reader Success Stories
- "My grandmother passed away last month and I wanted to learn how to crochet, that way I'll have something from her with me." ..." more
Advertisement
