Download Article
Create perfect sleeves with this helpful DIY guide
Download Article
Cutting out custom sleeves requires a custom made pattern, which can be a confusing process. However, taking measurements and using these to calculate and draw the sleeve pattern will result in a much better fit than using a pre-sized pattern. If you want to cut out your own sleeve pieces for a sewing project, then learn how to create your own sleeve pattern and then use the pattern to cut out your sleeve pieces.
Things You Should Know
- Take sleeve measurements of your shoulder to your wrist and the circumference around your bicep, elbow, and wrist, adding 1-2 inches (2.5-5.1cm) to each.
- Draw a basic pattern by marking your length measurements, armhole depth, and bicep circumference.
- Use your bicep line to create the shoulder curve, then cut out the pattern you’ve traced.
Steps
-
Measure from your shoulder to your wrist. Use a measuring tape to find the distance from the tip of your shoulder to your wrist. Bend your elbow slightly as you measure. Record this measurement. [1] X Research source -
Identify the distance from your shoulder to your elbow. Next, measure the distance from the tip of your shoulder to the tip of your elbow. Bend your elbow slightly to locate the point. Record this measurement. [2] X Research source- You can also bend your arm at a 90° angle, then measure from your shoulder to your wrist. [3]
X
Expert Source
Alessio Iadicicco
Apparel Manufacturing Specialist Expert Interview. 20 May 2021.
Advertisement - You can also bend your arm at a 90° angle, then measure from your shoulder to your wrist. [3]
X
Expert Source
Alessio Iadicicco
-
Find the circumference of your bicep , elbow, and wrist. The circumference is the area around a part of your body. Use your measuring tape to measure your bicep, elbow, and wrist. Record each of these measurements and then add to them to ensure that your sleeves will have enough fabric for seam allowance and give. You can add more or less to the measurements to ensure the desired fit. For each measurement, you will need to add: [4] X Research source- Bicep. Add about 2 inches (5.1 cm) to 3 inches (7.6 cm).
- Elbow. Add 1 inch (2.5 cm) to 2 inches (5.1 cm).
- Wrist. Add 1 inch (2.5 cm).
-
Calculate your armhole depth measurement. Finding the armhole depth measurement requires your bodice pattern. The armhole is the area where your sleeve will connect with your bodice. To find the sloper, place an L-shaped ruler so that its inner edges are lined up with the tip of the shoulder and the tip of the underarm. Then, mark the point at the inner edge of the L that falls on your bodice. The armhole depth measurement is the distance from the top of the shoulder to the point in the crook of the L-shape. Record this measurement. [5] X Research source
Advertisement
-
Mark the pattern paper with the length measurements. You should have a measurement for the shoulder to wrist and shoulder to elbow lengths. Mark the shoulder point with an A and the wrist (end of the sleeve) with a B. Place these marks in the center of the paper. [6] X Research source- If needed, you can crease the paper down the middle and then unfold it to help you find the center of the paper.
-
Mark your armhole depth. Measure from the folded edge parallel to point A to the end of the measurement for your armhole depth. Place a mark to indicate the measurement and label this as point C. [7] X Research source- For example, if your armhole depth measurement is 10 inches (25 cm), then you would measure 10 inches (25 cm) down from point A.
-
Draw a line through the armhole depth to mark your bicep circumference. Use your armhole depth measurement to find the point where your bicep circumference measurement should be. Measure from point C to half the bicep circumference you have recorded (including the amount that you added for slack) on either side of the line. Make sure that these points are even with each other. Connect the points to form a line that intersects point C at a 90 degree angle. [8] X Research source- For example, if your bicep circumference measurement was 20 inches (51 cm) and you added 2 inches (5.1 cm), then you would need to divide 22 inches (56 cm) by 2 to find half of your bicep circumference. In this case, half the measurement would be 11 inches (28 cm) and you would place marks 11 inches (28 cm) from either side point C.
-
Draw a line from the wrist mark equal to half your wrist circumference. Next, use the same process to identify the wrist circumference. Draw 2 points parallel to point B to indicate half of the wrist circumference. The full length of this line will be the total wrist circumference. [9] X Research source- For example, if your wrist circumference measurement was 7 inches (18 cm) and you added 1 inch (2.5 cm), then you would need to divide 8 inches (20 cm) by 2 to find half of your wrist circumference. In this case, half the measurement would be 4 inches (10 cm) and you would place marks 4 inches (10 cm) from either side point B.
-
Connect the ends of your lines. Draw a line extending from the end points of the lines you just made through points C and B. These will be the outer edges of your sleeve pattern.
Advertisement
-
Divide the bicep line with 6 points and mark the points. Measure your bicep line and divide it into 6 equally spaced points. Place 3 points on each side of the C point which is the center of the line. Then, mark the points from left to right using the letters D through I. This will make it easier to differentiate them. [10] X Research source- To evenly space your line, divide the total bicep measurement by 6. For example, if the bicep line is 24 inches (61 cm), then your points on the line will need to be 4 inches (10 cm) apart.
-
Create vertical lines going up from points E through H. Draw vertical lines extending upwards from points E and H to the level of point A. Use a ruler or straight edge to make the lines straight. These lines should be parallel to your central line that extends from points A to C. [11] X Research source -
Draw a diagonal line from points D to A and I to A. Next, use your ruler or straight edge to draw a diagonal line that extends from point A to D and another that extends from point A to I. These lines should only connect the points, and not extend beyond them. [12] X Research source -
Mark your points for the armhole and shoulder curve. The shoulder curve will connect to the shoulder area of your bodice piece, and it requires some precise markings. Make a mark in the following places. [13] X Research source- Above point E 0.75 inches (1.9 cm) below the diagonal line.
- Above point F 0.75 inches (1.9 cm) above diagonal the line.
- Above point G 1 inch (2.5 cm) above diagonal the line.
- At point H where diagonal the line crosses it.
-
Draw curve that goes through all of the points starting at D and ending at I. After you have marked all of the points for your armhole and shoulder curve, draw a curved line that goes from point D through all of the points you just marked, and that ends at point I.- A French curve tool is helpful for creating this curving line. [14] X Research source However, you can use another curved object or try to draw the line freehand if you do not have a French curve.
-
Cut out the pattern you have traced. Your sleeve pattern will be complete after you mark the curved line for the shoulder curve. Cut along the lines you traced onto the pattern paper, and then use your sleeve pattern to cut out sleeves for your project.- After you have cut out the pattern piece for your sleeves, use it to trace the sleeve shape onto your fabric and cut out the shapes that you trace.
- Don't cut on the bias—cut on the straight thread to avoid the risk of twisting the sleeve while you sew. [15]
X
Expert Source
Alessio Iadicicco
Apparel Manufacturing Specialist Expert Interview. 20 May 2021.
Advertisement
Expert Q&A
Search
-
QuestionHow do you cut long sleeves?Alessio Iadicicco is an Apparel Manufacturing Specialist based in Dallas, Texas. He was the CEO and Co-Founder of MarkersValley, an online apparel and manufacturer sourcing platform that connects luxury fashion brands to a network of highly-vetted, truly Italian manufacturers. After 6 years building MarkersValley, he transitioned into a career as a SBA Lender, currently working as VP of the SBA Business Development Office at U.S. Bank. Through this role, he helps small business owners secure the SBA funding they need to thrive. He holds a Bachelor's degree in Economy and Management of Financial Enterprises from The University of Naples Federico II. MarkersValley has connected fashion brands in over 100 countries and has a network of over 100 independent Italian factories and artisans. MarkersValley has been featured in Forbes, EQ, St. Louis Business Journal, Il Mattino, and Corriere Della Sera.To measure a sleeve correctly, bend the arm to a 90° angle so that it forms an "L". That way, the fit will account for both a straight and a bent arm.
-
QuestionHow do you cut the perfect armhole?Alessio Iadicicco is an Apparel Manufacturing Specialist based in Dallas, Texas. He was the CEO and Co-Founder of MarkersValley, an online apparel and manufacturer sourcing platform that connects luxury fashion brands to a network of highly-vetted, truly Italian manufacturers. After 6 years building MarkersValley, he transitioned into a career as a SBA Lender, currently working as VP of the SBA Business Development Office at U.S. Bank. Through this role, he helps small business owners secure the SBA funding they need to thrive. He holds a Bachelor's degree in Economy and Management of Financial Enterprises from The University of Naples Federico II. MarkersValley has connected fashion brands in over 100 countries and has a network of over 100 independent Italian factories and artisans. MarkersValley has been featured in Forbes, EQ, St. Louis Business Journal, Il Mattino, and Corriere Della Sera.To make a correct armhole, it is essential to take three measurements: the chest in circumference, the shoulder width — from a point in the center of the back, and the length from the center of the back to the wearer’s hip. After having drawn these various points on the pattern, draw a line from the shoulder point to the intended armhole and add 1 cm to give the garment a more realistic wearability.
-
QuestionWill I add seam allowance to the armhole?Random ChildCommunity AnswerYes, you should add a seam allowance of around 1 cm to any armhole. The size depends on the size of the fabric and product.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Video
Tips
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Things You’ll Need
- Pattern paper
- Measuring tape
- Ruler
- L-shaped ruler
- French curve (optional)
- Pencil
- Scissors
References
- ↑ https://www.threadsmagazine.com/2008/08/19/create-a-custom-sleeve-pattern
- ↑ https://www.threadsmagazine.com/2008/08/19/create-a-custom-sleeve-pattern
- ↑ Alessio Iadicicco. Apparel Manufacturing Specialist. Expert Interview. 20 May 2021.
- ↑ https://www.threadsmagazine.com/2008/08/19/create-a-custom-sleeve-pattern
- ↑ https://www.threadsmagazine.com/2008/08/19/create-a-custom-sleeve-pattern
- ↑ https://blog.elewa.co.uk/draft-easy-bodice-sloper/
- ↑ https://blog.elewa.co.uk/draft-easy-bodice-sloper/
- ↑ https://blog.elewa.co.uk/draft-easy-bodice-sloper/
- ↑ https://blog.elewa.co.uk/draft-easy-bodice-sloper/
- ↑ https://www.youtube.com/watch?v=5M7HyyHjjZY&feature=youtu.be&t=54s
- ↑ https://www.youtube.com/watch?v=5M7HyyHjjZY&feature=youtu.be&t=1m4s
- ↑ https://www.youtube.com/watch?v=5M7HyyHjjZY&feature=youtu.be&t=1m14s
- ↑ https://www.youtube.com/watch?v=5M7HyyHjjZY&feature=youtu.be&t=1m20s
- ↑ https://www.threadsmagazine.com/2008/08/19/create-a-custom-sleeve-pattern
- ↑ Alessio Iadicicco. Apparel Manufacturing Specialist. Expert Interview. 20 May 2021.
About This Article
Article Summary
X
To cut sleeves, start by measuring from your shoulder to your wrist and from your shoulder to your elbow. Also, record the circumference of your bicep, elbow, and wrist as well as calculate your armhole depth measurement. Next, mark the center of your pattern paper with the length measurements. As you continue to fill out your pattern, make sure to add 1-2 inches per each circumference measurement so the sleeves aren't too tight. To learn how to create the shoulder curve, keep reading!
Did this summary help you?
Thanks to all authors for creating a page that has been read 205,372 times.
Reader Success Stories
- "This article is super helpful. I really like how it gives you a written and visual example. It doesn't simply tell you the steps, but rather walks you through an example for easy understanding. I can now stitch my dress with confidence. :)" ..." more
Advertisement
85%
of readers found this article helpful
.
Click a star to add your vote
% of people told us that this article helped them.
"This article is super helpful. I really like how it gives you a written and visual example. It doesn't simply tell you the steps, but rather walks you through an example for easy understanding. I can now stitch my dress with confidence. :)"
..."
more
"I love sewing, and keep searching how to make a sleeve that fits the body. wikiHow gives me the best result. Thanks for educating us. It's very easy and simple to follow."
..."
more
"Wow. This article is really easy to understand compared to the ones I saw. Great job!"
"All the steps helped me, at least it is different from how I used to do it. "
"The article is just what I'm looking for at this time. So helpful."
