PDF download Download Article PDF download Download Article

Cutting the back of your own hair can be a daunting process. Make sure that you have 2 mirrors, 1 on the wall and 1 handheld, as this will help you to assess the hair at the back of your head. When using clippers, create a guideline first and clip upwards towards this. If you have longer hair and are using scissors, flip your hair forward and brush it out first. Whether you are using clippers or scissors, make small, careful cuts to ensure that your trimmed hair looks good.

Part 1
Part 1 of 2:

Using Clippers

PDF download Download Article
  1. To cut the back of your hair, you will need to make sure that your face is in the opposite direction to the largest mirror. A bathroom mirror works well for this purpose.
    • If you don’t have a wall-mounted mirror, a mirror propped up on a dresser will also work.
  2. A handheld or small makeup mirror works best. It will take a little bit of experimenting to find the best angle that you can use to see the back of your head. Ask a friend or relative to help you and have them adjust the mirror until you can see the back of your head.
    • A smaller makeup mirror that is attached to the wall, and can easily be adjusted to different angles would be a great alternative if you don’t have someone to help you.
    • Hold your head at a downward angle—that will make it easier to get a straight line along your neck. [1]
    Advertisement
  3. The teeth of the blade need to be facing the back of your neck. The blade will be parallel to the floor.
    • Swap the hand that you hold the clippers with throughout the process. For example, when you are trimming the right side of your neck, hold the clippers in your right hand, and swap as you move across your neck.
    • You will also need to swap the mirror between hands as you change the hand that you hold the clippers in. If possible, have a friend or relative hold the mirror for you.
  4. Look for your natural hairline and shave this line along your hairline. This will likely be where the outline from your previous haircut is.
    • Watch in the mirror the whole time as you shave the back of your neck . Keep the line as clean and straight as possible.
    • Stick as closely as possible to your natural hairline, as this will have the best results.
  5. They will need to be facing in the opposite direction to how you held them previously. Make sure that the teeth are now in an upwards direction.
    • This is so that you can cut your hair upwards towards the guideline you just made.
  6. Make small vertical strokes that reach from the bottom of the hair on your neck, and end at the guideline you shaved. Continue shaving vertical sections up to the guideline until there is no hair below the guideline.
    • Make sure that you only shave below the guideline that you created and not above. Tie up or clip back your hair if you don’t want to cut it.
    • This will remove any untidy hair on your neck and give you a clean shave.
    • Trim this area as slowly as steadily as you can to avoid shaving too high. [2]
    Peter Regan, Expert Hairdresser

    When cutting the back of your hair, it's important to section hair cleanly and evenly to allow for precision trimming. Hold sections taut and cut hair at the desired length based on your hair goals, whether that be maintenance, shaping, or changing the style dramatically.

  7. Create a small rounded guideline on the edges of your hair on your neck. Then remove the small patches of hair that are beyond the guideline, as you did in the previous step.
    • While you are in the process of rounding the corners, you can also check if there is any stray hair behind your ears.
  8. Advertisement
Part 2
Part 2 of 2:

Using Scissors

PDF download Download Article
  1. Hair cutting shears are available from most department stores, and are designed especially for cutting hair. These scissors will cut hair cleanly and neatly, and will help you to avoid getting split ends. [3]
    • Never try to use paper, craft, or kitchen scissors to cut your hair.
  2. Make sure that your head is hanging down lower than your neck, so that all of your hair is off your neck and hanging forward towards the ground. Brush or comb it all forward and make sure that there are no tangles .
    • Your hair can be either wet or dry to do this. If you hair is wet, remember that wet hair will shrink slightly as it dries and bounces up.
    • It’s also easier to see any existing layers if your hair is upside down.
  3. The hair that is from the back will be on the upside of your head. Carefully trim the tips to remove any damaged hair or split ends. [4]
    • Only make small cuts, and check your hair in the mirror regularly to look at the length. You don’t need to flip your hair over to check it in the mirror, as just turning your head to the side slightly will do.
  4. Although it may be tempting to get the job over quickly, make only smaller cuts to avoid making mistakes. Don’t try to trim off more than 1 inch (2.5 cm) at once. [5]
    • If you accidentally cut off more hair than desired, you will end up having to cut the rest of your hair to that length. However, if you cut off too little hair, you can always cut more.
  5. Stand with your back to a wall-mounted mirror, such as a bathroom mirror, and hold a small mirror towards your face. Find the angle that you can check the back of your hair with.
    • If the back of your hair looks a little uneven in the mirror, you can always flip your hair back over and adjust it.
  6. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    How can I get a neat line at the back of my hair?
    Martin Nepton
    Professional Hair Stylist
    Martin Nepton is a Professional Hair Stylist and Colorist at Bang Bang LA in Los Angeles, California. With over 11 years of experience, Martin specializes in helping clients express their Queer identity through hair. Martin offers personalized haircuts and color and style services with non-gender prices based on hair length. Martin holds a BA from the University of Québec at Montréal and is a Licensed Hair Stylist in California.
    Professional Hair Stylist
    Expert Answer
    Look down at the floor before you cut. That way, when you look straight again, you'll get a cleaner, more even line.
  • Question
    I got a very blunt hair cut that is just above my shoulders and want to add a few layers or texture. Can I do this at home (I'm very familiar with hair cutting). Will point cutting work?
    Community Answer
    You can cut your hair into layers if you would like. The article Layer Cut Your Own Hair May help you. Don’t cut too short because your hair is already short.
Ask a Question
      Advertisement

      Video

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Thanks for submitting a tip for review!

      Warnings

      • If you make a noticeable mistake while cutting the back of your hair, avoid trying to fix it yourself as this is likely to make it worse. Visit a hairdresser, and try again once your hair has grown out again.
      Advertisement

      Things You’ll Need

      • Wall mounted mirror
      • Handheld mirror
      • Makeup mirror
      • Clippers
      • Hair cutting scissors
      • Comb
      • Brush
      • Hair clips

      References

      1. Martin Nepton. Professional Hair Stylist. Expert Interview. 17 November 2020.
      2. https://www.mensjournal.com/health-fitness/how-to-trim-your-own-hair-20140520/
      3. https://www.youtube.com/watch?v=5YE3P-80lBs
      4. hhttps://www.youtube.com/watch?v=5YE3P-80lBs
      5. https://www.youtube.com/watch?v=5YE3P-80lBs

      About This Article

      Article Summary X

      While cutting the back of your hair yourself can seem tricky, just go slow and have 2 mirrors handy so you can watch your progress. If you have longer hair, flip it forward and cut off any split or damaged ends. Don’t cut more than 1 inch at a time to avoid mistakes. When you’re done, flip your hair back and look to see if it’s even. For shorter hair, point your clippers so the teeth on the blade are facing the back of your neck. Shave a horizontal guideline straight across the back of your neck, then turn your clippers over so the teeth are facing upward. Shave up from the bottom of your neck to your guideline. To learn how to get a more rounded cut with clippers, keep reading!

      Did this summary help you?
      Thanks to all authors for creating a page that has been read 288,663 times.

      Reader Success Stories

      • Angel Ramsey

        Nov 24, 2020

        "I have learnt a lot because I wasn't able to do it on my own, but through this I hope I will be able to do it ..." more
      Share your story

      Did this article help you?

      Advertisement