Download Article
Download Article
MAC Cosmetics makes some of the highest quality eyeshadows available, which is why so many professional makeup artists carry them in their kits. If you have a bunch of MAC eyeshadows in your collection, though, you've probably noticed how bulky the packaging is. Fortunately, there's a way to remove the shadows from their compacts and organize them in a palette that takes up much less space. While using heat to depot the shadows is probably one of the most common methods, you can also do it without heat if you have the right tools.
Steps
-
Cover your work area. While the goal is to keep the eye shadows in tact when you depot them, you may sometimes nick the powder and cause dust and particles to come loose. It’s a good idea to cover the table or counter that you’re working on with paper towel, newspaper, or some old towels that you don’t mind getting stained.
- Because you’re working with heated items, you should also have a trivet on your work area to protect the surface from the candle or flat iron.
-
Open the eye shadow compact and find the notch at the front. At the front of the compact, you’ll notice a small notch where the compact snaps shut. Just above it, you can see a thin line where the pan’s plastic housing fits into the compact. That’s where you’ll need to work to separate the two.Advertisement
-
Stick a pointed tool into the groove to pry the plastic around the shadow out. When you’ve found the groove between the plastic housing for the shadow and the compact, take a small, thin tool with a pointed tip and work it into the groove. Wedge it in the groove to give yourself some leverage. [1] X Expert Source Hannah Metz
Professional Makeup & Hair Artist Expert Interview. 14 December 2021.- You can use a pointed kitchen knife, flathead screwdriver, steel palette tool, craft knife, or pointed, flexible makeup spatula that you can usually find on beauty supply or cosmetics websites.
-
Wiggle the tool back and forth to free the plastic housing from the compact. Once your tool is wedged between the eyeshadow pan’s plastic housing and the compact, wiggle it back and forth to loosen it. The more you move the tool, the further you’ll be able to stick it under the plastic housing. When you have enough leverage, you’ll be able to pop the plastic housing and the eyeshadow pan inside it free.
- Be sure to take your time when you’re prying the eyeshadow’s housing free from the compact to avoid breaking the plastic and damaging the shadow. If you feel strong resistance, continue gently wiggling the tool back and forth until you can feel the housing start to come loose.
Advertisement
-
Light a small candle and use pliers to hold the shadow above the flame. After you’ve freed the shadow’s plastic housing from the compact, light a small candle. Use a pair of pliers to allow you to hold the back of the plastic housing over the candle’s flame without burning yourself. Hold the plastic housing over the flame for 30 seconds to 1 minute or until the adhesive holding the pan inside the housing starts to melt. [2] X Expert Source Hannah Metz
Professional Makeup & Hair Artist Expert Interview. 14 December 2021.- A small tea light is an ideal candle to use for depotting your eyeshadow.
- You can also use a lighter, if you prefer. [3]
X
Expert Source
Hannah Metz
Professional Makeup & Hair Artist Expert Interview. 14 December 2021. - Don’t allow the flame to actually touch the plastic or it may catch fire. Hold it several inches above the flame.
-
Push against the back of the shadow with a tool to pry it free. After 30 seconds or so, take your pointed tool and press it against the back of the plastic housing. The goal is to push the eyeshadow pan out of the housing once the adhesive is weak enough. [4] X Expert Source Hannah Metz
Professional Makeup & Hair Artist Expert Interview. 14 December 2021.- You don’t want to force the pan out of the housing if the adhesive is still strong or you may break the eyeshadow in the process. If the pan won’t come loose when you press against the back, hold it over the flame again to melt the adhesive further.
- When you’re pressing against the back of the housing, it helps to target the center of the plastic.
-
Allow the eyeshadow pan to cool. After you free the eyeshadow from the plastic housing, the metal pan will likely be hot. Let it cool for several minutes before you label it, place it in a palette, or otherwise handle it.
- Set the eyeshadow pan on a trivet or potholder to cool so you don’t have to worry about the heat damaging your work surface.
Advertisement
-
Plug in your flat iron and turn it to the highest setting. To generate enough heat to melt the adhesive that holds the eyeshadow pan in the plastic, it’s important for your flat iron to be as hot as possible. Place it on a trivet on your work area so one of its plates is flat against the table or counter. Turn the iron on, and set it to the highest setting. [5] X Research source
- Give the flat iron several minutes to warm up after you turn it on so you know that it’s reached the desired heat setting.
-
Place the eye shadow in the plastic housing on the plate of the iron. Take the eyeshadow in the plastic housing and place it on the iron’s plate that’s resting flat against the work surface. Allow the plastic to sit on the iron for 15 to 20 seconds so the adhesive has time to melt before removing it. [6] X Research source
- Use a small pair of tongs or pliers to remove the plastic housing from the hot flat iron or you may burn your fingers.
-
Stick a pointy tool against the center of the back of plastic housing to free the eyeshadow pan. Take a tool with a pointy edge and press it against the black of the plastic housing in the center. Push on the plastic until the eyeshadow pan pops free. [7] X Research source
- If possible, wear heat resistant gloves when you’re holding the plastic to press the tool against. That way, you won’t have to worry about the hot plastic burning you. If you don’t have gloves, be sure to hold the plastic around the edges, which weren’t resting against the iron’s plate.
- If it feels like the pan is resistant, you may want to place it back on the flat iron for several seconds to further weaken the adhesive.
-
Let the eyeshadow pan cool. The eyeshadow pan will be hot when you press it free from the plastic housing. Make sure to let it cool on a towel or trivet for several minutes before handling it. [8] X Research source
Advertisement
-
Pour some 99% isopropyl alcohol into a small dish. Isopropyl alcohol can help dissolve the adhesive that holds the eyeshadow pan in the plastic housing. Take a small dish, and pour a few tablespoons (45 ml) of 99% isopropyl alcohol into it or enough for all of the shadows you plan to depot. [9] X Research source
- While you can use different percentages of alcohol, such as 70% isopropyl alcohol, the higher the percentage, the more quickly it will dry and dissolve the adhesive.
-
Apply the alcohol all around the shadow pan in the compact and let it sit. Take a medicine dropper and pick up a small amount of the alcohol. Run the medicine dropper all around the eyeshadow pan to dispense the alcohol between the pan and the plastic housing. Allow the alcohol to work on the adhesive for 30 seconds to 1 minute. [10] X Research source
- If you don’t have a medicine dropper, use a cotton swab to absorb some of the alcohol from the bowl. Run the cotton swab around the pan, pressing gently to squeeze the alcohol between the pan and the plastic housing.
- Don’t worry if you get alcohol on the eyeshadow itself. It won’t harm the makeup. In fact, isopropyl alcohol is often used to mend shattered eyeshadows, blushes, and powders.
-
Run a craft knife or other sharp object between the pan and the plastic housing to loosen it. Take a craft knife or other pointed tool, and press it between the pan and the plastic housing. Run it all along the pan to gently loosen it from the plastic. [11] X Research source
-
Wedge your tool underneath the pan pry it loose.When you feel the pan start to give as you work the craft knife around it, slip your tool under the pan to create leverage. Press upward with the knife to carefully pry the eyeshadow pan out of the plastic housing. [12] X Research source
- If there is dried adhesive on the back of the eyeshadow pan, run a little more alcohol over it, allow it to sit for a minute, and then use your tool or finger to scrape off the glue.
Advertisement
-
Place a magnet on the back of the shadow pan. MAC doesn’t place magnets on the back of their eyeshadow pans, but most freeform palettes are magnetized. To fix your Depot shadows so you can place them in a palette, take a magnet sticker that you can find on a variety of beauty supply websites, as well as at craft stores, and place it on the back of your eyeshadow pan. [13] X Expert Source Hannah Metz
Professional Makeup & Hair Artist Expert Interview. 14 December 2021. [14] X Research source- Some freeform palettes include the magnetic stickers, so you don’t have to purchase them separately.
-
Label the back of the shadow with the name. MAC places the labels with the eyeshadow’s shade name on the back of the compact, so when you depot, there’s no label on the pan itself. If you want to remember the shade names, take a round label that you can find at an office supply store, place it on the back of the pan, and write the shade name with a pen or marker. [15] X Research source
- You can also use a permanent marker to write the shade directly on the back of the magnet sticker that you place on the back of the eyeshadow pan.
- If you’re using one of the heated methods to depot your shadow, you can also use the heat to remove the sticker from the back of the compact. Hold the compact over the candle flame or place it on the flat iron for just a few seconds to loosen the sticker’s glue. Use your finger or a spatula to pry up an edge of the sticker and then peel it away. Press it onto the back of the magnet to label the shadow.
-
Set the shadow in a MAC palette or other magnetic freeform palette. Once your depotted eyeshadow has a magnet and is labeled, you can place it in a palette. Some palettes have specific wells that the shadow pans fit directly into. Others feature a flat, magnetized surface that allows you to place the shadow pans in any configuration that you want.
Advertisement
Expert Q&A
Search
-
QuestionWhy do you depot eyeshadow?Hannah Metz is a Professional Makeup & Hair Artist. She is the Owner & CEO of Anomalie Beauty Agency. The agency features a team of Makeup & Hair Artists, offering luxury, on-location services with a diverse focus in many areas of expertise, such as Bridal, Brand Campaigns & E-commerce, Lifestyle, Events, Corporate Events, Headshots & Conferences, Print, Media & Television, and more. Anomalie’s team represents artists & stylists in Chicago, Nashville, and Charlotte, with plans to expand across the US, and offers mobile services both nationwide and internationally. Before founding Anomalie, Hannah was the CEO of Hannah Elisabeth Beauty. With over ten years of experience, she specializes in providing luxury makeup artistry and hair styling. Hannah and her team have completed beauty work for brand campaigns, celebrity red carpet events, and social media influencers. Hannah believes in the power of hair and makeup to help women’s inner beauty shine through.Depotting eyeshadow allows you to create a larger and more customized eyeshadow palette.
-
QuestionWhat is the perfect drugstore dupe for MAC eyeshadow?Cecilia FloresTop AnswererFortunately, many drugstore shadows are better than MAC shadows! I personally think WetNWild shadows are so much better.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Video
Tips
- If you’re new to depotting, you may wind up cracking or breaking some shadows in the beginning. It’s best to start with an eyeshadow that you don’t mind possibly damaging and move onto other shades when you have more practice.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
Warnings
- Use caution when working with a sharp tool, such as a kitchen knife or craft knife. It’s very easy to slip and cut yourself.Thanks
- Use caution when you’re working with an open flame or hot flat iron. You can easily burn yourself or start a fire if you’re not careful.Thanks
- If you are using one of the heated depotting methods, make sure that the room you’re working in is properly ventilated. When the plastic melts, it can give off toxic fumes. Open a window or two before you begin working.Thanks
Advertisement
Things You Need
All Methods
- Paper towel, newspaper, or old towels
- Trivet or potholder
- Kitchen knife, craft knife, or pointed, flexible makeup spatula
- Magnet stickers
- Labels
- Empty eyeshadow palette
Candle Method
- Small candle
- Pliers
Flat Iron Method
- Flat iron method
- Pliers or tongs
No Heat Method
- 99% isopropyl alcohol
- Eyedropper
References
- ↑ Hannah Metz. Professional Makeup & Hair Artist. Expert Interview. 14 December 2021.
- ↑ Hannah Metz. Professional Makeup & Hair Artist. Expert Interview. 14 December 2021.
- ↑ Hannah Metz. Professional Makeup & Hair Artist. Expert Interview. 14 December 2021.
- ↑ Hannah Metz. Professional Makeup & Hair Artist. Expert Interview. 14 December 2021.
- ↑ https://www.youtube.com/watch?v=YpOdOGtINLo
- ↑ https://www.youtube.com/watch?v=YpOdOGtINLo
- ↑ https://www.youtube.com/watch?v=YpOdOGtINLo
- ↑ https://www.youtube.com/watch?v=YpOdOGtINLo
- ↑ https://www.youtube.com/watch?v=j4X7n1kw_WA
- ↑ https://www.youtube.com/watch?v=j4X7n1kw_WA
- ↑ https://www.youtube.com/watch?v=j4X7n1kw_WA
- ↑ https://www.youtube.com/watch?v=j4X7n1kw_WA
- ↑ Hannah Metz. Professional Makeup & Hair Artist. Expert Interview. 14 December 2021.
- ↑ https://www.youtube.com/watch?v=YpOdOGtINLo
- ↑ https://www.youtube.com/watch?v=j4X7n1kw_WA
About This Article
Article Summary
X
To depot MAC eyeshadow, start by applying a few drops of 99 percent isopropyl alcohol around the shadow pan so it gets between the pan and plastic housing. It's OK if you get some of the alcohol on the eyeshadow itself. Then, let the alcohol dissolve the adhesive in the pan for at least 30 seconds. Next, run a knife between the pan and plastic housing to loosen it. Finally, use the knife to pry the pan from the plastic housing. To learn how to use heat to depot MAC eyeshadow, keep reading!
Did this summary help you?
Thanks to all authors for creating a page that has been read 64,245 times.
Advertisement
100%
of readers found this article helpful
.
Click a star to add your vote
% of people told us that this article helped them.
