PDF download Download Article PDF download Download Article

Growing a beard is a simple yet eye-catching way for a man to make a statement. But if your facial hair is coming in too light, or you've got a few gray hairs peeking through, you might not be making the statement you want. Luckily, there's an easy fix—enhancing your natural color with beard dye. You don't have to be an experienced stylist to touch up your beard yourself. All you need is a package of dye, a brush and an idea of how best to upgrade your look.

Part 1
Part 1 of 3:

Preparing to Dye Your Beard

PDF download Download Article
  1. In order for the color to stand out, your beard will need to be a little bit longer. Wait a week or two after deciding to dye your facial hair to give it time to come in nice and thick. A little extra length will also help the dye hold. [1]
    • Facial hair shorter than about an inch (2.5cm) may be more difficult to dye.
    • If you dye your beard before it has a chance to fill out, you'll just be forced to repeat the process later on to blend in the new growth.
  2. You'll want to select a shade that's similar to your natural hair color. If you have dark hair, go with a deep brown rather than black, which almost always looks artificial. If you have lighter hair, find a dye that most closely matches your own shade. [2]
    • Use the color squares on the packaging for reference.
    • Since beard dyes tends to show up dark, it's usually a good idea to pick a color that's slightly lighter just to be on the safe side. [3]
    • Just For Men, Redken and RefectoCil are a few of the most highly-rated brands of beard dyes.
    Advertisement
  3. Some beard dyes can cause allergic reactions. To make sure you won't have an issue with the hair dye you've chosen, rub a single drop onto an inconspicuous area of skin, like your wrist or the inside of your elbow. If you don't experience a reaction, it's safe to go ahead and color your beard. [4]
    • Leave the dye in place overnight to give it ample time to react and check the results the following morning. [5]
    • If spot where you applied the dye becomes red, itchy or inflamed, switch to a hypoallergenic variety of dye.
  4. Wet your facial hair and work a small amount of shampoo through it to form a rich lather. Scrub the skin beneath your beard with your fingertips, then rinse out the shampoo and towel off or blow dry thoroughly. It should be completely dry before you begin dying. [6]
    • Make sure you've rinsed out every last trace of shampoo so it doesn't interfere with the dye's ability to take hold.
    • Don't use a conditioner. This will form a protective coating around the hairs, making it harder for them to absorb the dye.
  5. Advertisement
Part 2
Part 2 of 3:

Applying the Dye

PDF download Download Article
  1. Use the long-handled applicator included with the dye kit to layer the dye onto your facial hair. Brush with quick up-and-down strokes, making sure you've covered all visible patches including the mustache and sideburns. Work the dye down deep, but try not to let it come into contact with the skin itself. [7]
  2. Once applied, the dye will begin working within minutes. Keep a close eye on the color of your beard during this time. To test the results, you can remove the dye from a small section using a damp paper towel and take a look at the coloring underneath. [10]
    • Follow the instructions on the packaging to get an idea of how long you should let the dye set up (this will usually be somewhere between 20-40 minutes). [11]
    • For darker beards, a second application may be necessary to achieve the right depth of color.
  3. When you're satisfied with the color, turn on the faucet and run some cool water over your beard. This will dull the vibrant dye to a more natural-looking tint. Continue rinsing your beard until the water runs clear. [12] Make sure not to let any dye get in your eyes, mouth, or nose. [13]
  4. If your beard comes out too dark, you can lighten it a little by showering right away while the dye is still fresh. It may also help to scrub your facial hair with a clarifying shampoo, although this may strip away more color than you want. [15]
    • Blow dry your beard on a low heat setting or let it air dry to avoid staining your towels.
    • After your first shampoo, you can go back to showering, cleaning and trimming your beard as usual.
  5. Advertisement
Part 3
Part 3 of 3:

Maintaining the Color of Your Beard

PDF download Download Article
  1. Avoid handling your newly-dyed facial hair too much, as the friction may rub off the coloring. Instead, let the water run through your beard and comb it out gently with your fingers. Most of the time, a simple rinse will be enough to keep your beard clean and your color intact. [16]
    • Hot water is more likely to cause fading than cooler temperatures. [17]
    • Wait until your beard is dry before brushing it or applying any other products, like lotions or oils.
  2. Invest in shampoos and conditioners formulated for use on color-treated hair. These are designed to clear away dirt and oil without affecting the hair's color. You'll be able to find these types of products in the beauty aisle of most major supermarkets and pharmacies. [18]
    • If you're used to shampooing and conditioning your beard every time you shower, consider cutting down to once or twice a week. [19]
  3. Most dyes are non-permanent, which means they'll need to be reapplied when they begin to fade. For follow up colorings, you'll probably only need to go through a single round of coloring. Treating your beard regularly will keep it looking thick, full and youthful. [20]
    • Aim to dye your beard every 3-6 weeks, or sooner if needed. [21]
    • Because of how fast facial hair grows, your beard's roots may need to be touched up more frequently than the rest of it.
  4. Advertisement

Video

Expert Q&A

Search
Add New Question
  • Question
    Is coloring your beard bad?
    Marlon Rivas
    Facial Hair Specialist
    Marlon Rivas is a Barber and Owner of MGX Professional Men's Grooming, a barbershop based in the San Francisco Bay Area. He is also the founder of Busystyle.com, a service that provides online scheduling services to businesses in the barbering and beauty industry. Marlon has over 15 years of experience in managing and providing barber services.
    Facial Hair Specialist
    Expert Answer
    No, but wait until your beard is at least 1/2 inch long before you dye it. If you let your beard grow before you dye it, you'll get a longer life cycle out of the product. Beards grow quickly, so if you dye it when it's short, you'll end up with a salt-and-pepper look where the bottom half of the hair will be dyed and the top half will be grey.
  • Question
    Can you dye your beard with hair dye?
    Christine George
    Master Hair Stylist & Colorist
    Christine George is a Master Hairstylist, Colorist, and Owner of Luxe Parlour, a premier boutique salon based in the Los Angeles, California area. Christine has over 23 years of hair styling and coloring experience. She specializes in customized haircuts, premium color services, balayage expertise, classic highlights, and color correction. She received her cosmetology degree from the Newberry School of Beauty.
    Master Hair Stylist & Colorist
    Expert Answer
    Yes! If you are unsure about what color will be best for you, consider talking to a hair stylist and colorist. They can apply their knowledge of dyes and color theory to help you find the best match. Also, stay away from cleaning products containing harsh chemicals, such as sulfates and parabens.
  • Question
    How do I get ladies with my beard?
    Community Answer
    Ladies aren't drawn to beards specifically, but being yourself will catch a woman's attention.
Ask a Question
      Advertisement

      Tips

      • Henna and other natural pigments can make a safe alternative for people allergic to the chemicals in normal hair dyes.
      • Dye jobs can get pretty messy. It's recommended that you wear an old t-shirt that you don't mind ruining in case of drips or runs.
      • Men who are after a more mature look can choose a lighter shade of dye or rinse it out before the full cycle to leave a little glimpse of salt-and-pepper showing through.
      Show More Tips
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      • Don't let the hair dye come into contact with anything metal (combs, mixing bowls or hair clips, for instance). Metals can cause hair dye to oxidize, which may throw off the finished color or cause permanent damage to your hair.
      Advertisement

      Things You'll Need

      • Beard dye
      • Applicator or similar tool (toothbrush, makeup brush, comb, etc.)
      • Rubber gloves
      • Color-protection shampoo and conditioner (optional)
      • Moisturizing beard oil (optional)
      • Towels
      • Old t-shirt

      About This Article

      Thanks to all authors for creating a page that has been read 152,535 times.

      Did this article help you?

      Advertisement