PDF download Download Article
An in-depth guide eject a disc from a PS4, PS4 Slim, or PS4 Pro
PDF download Download Article

Do you have a game disc stuck in your PlayStation 4? If you're unable to eject the disc using your controller or the eject button, you'll need to manually remove the disc. You'll just need your Model number and a long Phillips screwdriver to get started. The Model number can be found on the back of your PS4 or on the spine for Pro and Slim models. This wikiHow will show you how to get a stuck disc out of your PS4 console.

Things You Should Know

  • Press "Options" on your controller, then "Eject" to try removing the disc first.
  • Find your Model number on the back or on the spine of the console. It will contain "CUH" followed by four numbers and a letter.
  • Depending on your model, locate the manual eject hole and insert a Phillips screwdriver. When you turn the tool, the disc should eject.
Method 1
Method 1 of 4:

Using a Controller

PDF download Download Article
  1. This will return you to the main menu if you aren't there already.
    • If your controller isn't working, make sure it's fully charged .
  2. This is the button on the right side of the touchpad.
    • A panel will open on the right.
    Advertisement
  3. The game disc should remove.
    • If this doesn't work, push the Eject button on your PS4. This is the button with the arrow symbol.
    • If the disc isn't ejected from the console, proceed to the next method for your PlayStation model.
  4. Advertisement
Method 2
Method 2 of 4:

Ejecting Stuck Disc for CUH-7000/CUH-2015 Series

PDF download Download Article
  1. Turn off your console and unplug all connected cables, including the power cable and HDMI cable. [1]
    • To double-check your Model number, look at the back or spine of the system. It should be located next to MODEL . [2]
    • You will need a long Phillips screwdriver for this method.
  2. The PlayStation logo should be facing away from you.
    • If there's a cap on the screw hole directly above the logo, remove it. Newer consoles may not have this screw cover.
  3. Fit the tool into the grooves properly.
  4. This will take a few turns of the screw.
    • You may feel some resistance; there is a layer of plastic you'll need to push through in order to remove the screw.
    • The disc should release as you turn the screwdriver.
  5. If you touched the disc on the bottom, you should clean it before using it again.
    • Turn your console right-side up again.
  6. Plug in your PS4 and power it on . Connect the power cord and HDMI cable, then use the power button on your console or controller to turn it on.
    • You can now enter a new disc into your PlayStation 4.
  7. Advertisement
Method 3
Method 3 of 4:

Ejecting Stuck Disc for CUH-1200 Series

PDF download Download Article
  1. Turn off your console and unplug all connected cables, including the power cable and HDMI cable.
    • To double-check your Model number, look at the back or spine of the system. It should be located next to MODEL .
    • You will need a long Phillips screwdriver for this method.
  2. The PlayStation logo should be on the right side.
    • You'll need to remove the left panel.
  3. You may need to turn the console for this.
    • The base of your palms should be near the seam of the console.
  4. You should hear a distinct click.
    • The top panel will move about 7mm/0.27 inches.
  5. You should see a screw with the PlayStation symbols near the disc slot.
    • If desired, you can clean your PS4 by dusting this section with compressed air.
  6. Fit the tool into the grooves properly.
  7. The disc should release.
  8. Be sure to avoid touching the bottom of the disc.
  9. Place the panel over the exposed section, leaving about 7mm/0.27 inches from the seam. Then, slide the panel towards the seam until you hear a click.
  10. Connect the power cord and HDMI cable, then use the power button on your console or controller to turn it on.
    • You can now enter a new disc into your PlayStation 4.
  11. Advertisement
Method 4
Method 4 of 4:

Ejecting Stuck Disc for CUH-1110/CUH-1000 Series

PDF download Download Article
  1. Turn off your console and unplug all connected cables, including the power cable and HDMI cable if you connected your PS4 to a TV or monitor.
    • To double-check your Model number, look at the back or spine of the system. It should be located next to MODEL .
    • You will need a long Phillips screwdriver for this method.
  2. The PlayStation logo should be on the right side.
    • You'll need to remove the left panel.
  3. You may need to turn the console for this.
    • The base of your palms should be near the seam of the console.
  4. You should hear a distinct click.
    • The top panel will move about 7mm/0.27 inches.
  5. You should see two sets of vents on the left side.
  6. This is the vent closest to the eject slot, not the vent grouped with other vents.
    • Shine a light through this vent to find the manual eject screw.
  7. Fit the tool into the grooves properly.
  8. This will take a few turns of the screw.
    • You shouldn't feel much resistance when turning the screw.
    • The disc should eject halfway out the disc slot.
  9. Be sure to avoid touching the bottom of the disc.
  10. Place the panel over the exposed section, leaving about 7mm/0.27 inches from the seam. Then, slide the panel towards the seam until you hear a click.
  11. Connect the power cord and HDMI cable, then use the power button on your console or controller to turn it on.
    • You can now enter a new disc into your PlayStation 4.
  12. Advertisement

Expert Q&A

Ask a Question
      Advertisement

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Thanks for submitting a tip for review!

      About This Article

      Thanks to all authors for creating a page that has been read 44,123 times.

      Did this article help you?

      Advertisement