PDF download Download Article
Clean out your cordless, cylinder, or upright vacuums with ease
PDF download Download Article

When your Dyson vacuum has a full canister, it’s time to empty it out so your machine works properly. The exact way you empty a Dyson vacuum depends on the model, so we've outlined the steps for every Dyson model below. We’ll also cover what to do if your Dyson canister is stuck closed, and how to clean out the filter.

How to Empty a Dyson Vacuum Bin

The exact steps for emptying a Dyson vacuum depend on the model you have, but in general, start by removing the canister from the vacuum’s base. Hold the canister over a trash can, and press down on the canister’s release tab to empty out the dirt.

Section 1 of 12:

Dyson Cordless V8 and V7

PDF download Download Article
  1. Press the red button on the nozzle attachment and remove it from the canister. Hold the canister over a trash can or a large plastic bag. Then, just pull the red lever on the top of the canister straight up to open the bottom and release the dirt inside. Close the hatch on the bottom so it clicks. [1]
    • For additional cleaning, press the red tab on the buttons where the vacuum base connects to pull out the filter. Then, press the red tab on the bottom of the canister to take it off the base. Wipe inside the canister with a damp cloth to pick up any leftover dust.
  2. Advertisement
Section 2 of 12:

Dyson Cordless V11

PDF download Download Article
  1. Press the red release button where the wand connects to the base of the vacuum and remove it. Hold the vacuum canister over a trash bag, and hold onto the red lever under the handle. Push the lever straight down to open the bottom of the canister and empty out any dirt and dust. Close the hatch and slide the canister up to lock it back in place. [2]
    • If you want to do a deeper clean, press the red release tab on the canister to slide it off of the vacuum base. Wipe the inside with a damp cloth, let it dry, and then reinstall it on your machine.
Section 3 of 12:

Dyson Cordless V12 & V15

PDF download Download Article
  1. Press the red tab where the vacuum wand connects to the base. Hold the canister over a trash can so it’s pointing down. Press on the red release tab near the middle of the canister to slide it down and open the hatch. Once all the dirt and debris falls into the trash, push the bin upwards and snap the hatch closed. [3]
    • Press the red tab on the back of the canister to completely remove it from the base for a more thorough cleaning. Wipe the inside with a damp cloth, let it dry, and then slide it back onto your vacuum.
  2. Advertisement
Section 7 of 12:

Dyson Ball Cylinder

PDF download Download Article
  1. Find the gray canister release button near the vacuum’s handle and press it down. Hold the canister over your trash can, and push down on the red button on top to open the bottom hatch. Give the canister a few shakes to get rid of the debris before closing the hatch again. [8]
    • If dust is stuck inside the canister, press the gray button on its side to remove the top. Wipe the inside of the canister with a damp, lint-free cloth and let it dry. Then, slide the pieces back together and put them back on the vacuum’s base.
  2. Advertisement
Section 9 of 12:

Dyson Humdinger Handheld

PDF download Download Article
  1. Press the red button on the vacuum wand and pull it off of the base. Hold the canister over your trash can and press down on the red button on the side. Slide the canister down to open the hatch and empty your vacuum. Then, close the hatch and slide the canister up until it clicks into place. [10]
    • To clean the vacuum more, push the red tab on the canister to the side to remove it from the base of the machine. Wipe the inside out with a damp cloth, let it dry, and reattach it to your machine.
  2. Advertisement
Section 12 of 12:

Cleaning a Dyson Filter

PDF download Download Article
  1. The filter location depends on the Dyson vacuum model you have, but they’re usually found near the top of the canister and can easily be pulled out. Alessandra Mendes, a cleaning specialist, says to “rinse it with cold water until the water runs clear. Make sure you don’t use soap or place it in any kind of washing machine as it will damage your filter. Gently squeeze the water out and allow it to air dry completely before using it again.”
    • Regina DeCorte, a residential cleaning specialist, recommends cleaning the filters on a regular monthly schedule to keep your vacuum running properly.

Expert Q&A

Ask a Question
      Advertisement

      Tips

      • Empty your Dyson vacuum any time it reaches the max fill line on the side of the canister. If you continue using your vacuum while it’s full, it may not have enough suction to effectively clean your home.
      • Hold the garbage bag tightly to the sides of the Dyson canister to help prevent dust and dirt from floating out.
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Thanks for submitting a tip for review!
      Advertisement

      About This Article

      Thanks to all authors for creating a page that has been read 2,112 times.

      Did this article help you?

      Advertisement