Download Article
Download Article
Dates are a flowering plant that are often dried and are great for snacking or for use in a number of different recipes. Dates have a pit in the center, so you’ll want to remove it before you start chopping. Chop dates by hand with a sharp paring knife or a pair of scissors. Chop dates quickly into tiny pieces with a food processor. Dates are a sticky fruit, so you want to take a couple precautions to keep the blades from gumming up.
Things You Should Know
- For best results, pit the date first before you cut it by cutting a slit in it and prying the pit out with the tip of a thin knife or chopstick.
- A serrated or paring knife is probably your best bet if you’re going to chop the date by hand.
- So long as you take the pit out, you can pulse dates in a food processor .
- If you don’t have a processor, you can put the pit-free dates in a blender with a dash of water to break them down into tiny pieces.
Steps
-
Use a serrated or paring knife to slice the date lengthwise. Set the date on a cutting board or hold the date in the palm of your hand. Make a cut down the long side of the date. Your knife may hit the pit in the center as you cut.
- If you set the date on a cutting board, hold the sides when you cut it. If you hold the date in your hand, be especially careful that you don’t cut yourself.
-
Use a slicing motion when you cut the date. The consistency of date skin does not make it easy to chop it with a standard chopping knife. Don't use a chopping-style knife, and use a slicing motion instead of a chopping motion.Advertisement
-
Open the date and remove the pit . Set the knife aside. Stick the tips of your thumbs into the cut you made with the knife. Gently pull the sides apart so you reveal the inside of the date and the pit. [1] X Research source
- Toss the pit in the trash or place all of the pits in a pile to dispose of later on.
-
Slice the date into thin strips. Set the date down on the cutting board. Use a paring knife to cut the date lengthwise into strips. Make them as narrow as you wish based on how small you want the final chunks to be. ¼ in (6.34 mm) to â…› in (3.2 mm) is a good width. [2] X Research source
- To work against the stickiness of the fruit, it also works to cut the dates with a pair of scissors instead of a knife.
-
Rinse the knife or coat it with flour if it gets sticky. Since dates have such sticky juice, your knife might get gummy. If this happens as you cut, rinse the knife in hot water to get the juice off, or coat it in some flour to keep the stickiness under control.
-
Turn the strips sideways and cut across them. Make a series of crosscuts on the strips of date that you just cut. Make the cuts close enough together that the pieces end up being as small as you want them to be.
- If the pieces still aren’t small enough, cut them all into smaller pieces so they are the size you want them to be.
Advertisement
-
Process some oatmeal into powder in the food processor. Since dates get so sticky when you chop them, it’s helpful to add a drying agent to the food processor. Oatmeal works well because it doesn’t add much flavor and it washes off fairly easily. Toss a handful into the food processor bowl. [3] X Research source
- If you don’t mind the dates ending up in a single sticky ball, it’s not necessary to process the oatmeal first.
-
Add pitted and quartered dates to the food processor. Slice dates lengthwise and remove the pits. Then cut the dates in half two times so you have chunks that are roughly a quarter of the original date. Food processing works best if you start with chunks rather than whole fruit.
-
Pulse the food processor until the dates reach the size you want. Even if your food processor has specific settings, it works best to use the pulse button. This allows you to check the dates every few seconds to make sure they don’t get chopped too much.
-
Rinse the dates with cold water to remove the oatmeal. If you don’t want the oatmeal powder to be included in your dates recipe, rinse it off of the chopped dates. Most of the time it’ll all rinse off. The dates should separate from a glob into pieces. You may need to stir them to break them apart fully. [4] X Research source
Advertisement
Expert Q&A
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Tips
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Things You'll Need
- Dates
- Serrated knife (optional)
- Paring knife
- Food processor
- Oatmeal (optional)
- Water or flour (optional)
Expert Interview
Thanks for reading our article! If you’d like to learn more about cooking, check out our in-depth interview with Sarena Nelson .
References
About This Article
Thanks to all authors for creating a page that has been read 79,716 times.
Reader Success Stories
- "Did the food processor method with a Vitamix and it worked wonderfully. Without the oats I'm sure it would have just turned into a sticky blob. " ..." more
Advertisement