How to Finish Knitting

Co-authored by Jen Webber and Jessica Gibson

Last Updated: July 1, 2024 Fact Checked

You might feel like you've finished your knitting project when you reach the final row, but you're not done yet. To stop your beautiful item from unravelling, you've got to cast off the last row of stitches. Casting off is sometimes called binding off, but they both refer to slipping stitches over each other to secure them. Once you reach the very end, you'll thread the yarn tail through a needle so you can weave in the loose tail and then you are truly finished!

Part 1

Part 1 of 2:

Casting Off for Beginners

Download Article

1
Complete the final row of stitches according to your pattern. Follow your knitting pattern to make whatever it is you're working on like a scarf, blanket, or dishcloth, for instance. When you reach the end of the pattern, it should say something like "Cast off" or "Bind off." This just means that it's time to secure the stitches so you can take the item off of your needles.
- You don't need to switch yarn or needles when you start to cast off. You're essentially working new stitches and slipping them over each other.
2
Knit 2 stitches to start casting off. Keep the stitches loose so it's easier to slide them over each other. You'll now have 2 stitches on your right needle and the rest of your project on your left needle. ^{[1]
X
Research source}
- If your pattern directed you to slip the first stitch of each row, don't slip it for your cast off row. Just make 2 knit stitches .
Advertisement
3
Insert the left needle under the first stitch on your right needle. Slip the tip of the left needle under the stitch that's closest to you on the right needle. Insert the left needle through the front of the stitch instead of the back. ^{[2]
X
Research source}
- Don't worry about the other stitch on your right needle. This is the stitch you'll be slipping over.
4
Bring the first stitch over the second stitch on the right needle. Keep your left needle under the first stitch and slowly bring the stitches towards the tip of the right needle. Pull the left needle up to slip the first stitch over the other stitch that's on your right needle. Then, pull the left needle out to drop the stitch. ^{[3]
X
Trustworthy Source
Official UK government website
Official website for the public sector of the UK government
Go to source}
- At this point, you've cast off 1 stitch and you have just 1 stitch remaining on the right needle.
- As you continue doing this, you're reducing the number of stitches that you have, all the way to the end. ^{[4]
  X
  Expert Source
  
  Jen Webber
  Knitting Specialist
  
  Expert Interview. 4 August 2020.}
5
Knit 1 stitch and slip the first stitch over it. In order to cast off another stitch, you need 1 more stitch on the right needle so knit a stitch. Once you have 2 stitches on the right needle, lift the first stitch over the stitch you just made and drop it off the needle. Remember to keep your knitting loose as you cast off. ^{[5]
X
Trustworthy Source
Official UK government website
Official website for the public sector of the UK government
Go to source}
- If your stitches are tight, you'll have a hard time lifting the first stitch over the second stitch. A tightly cast-off edge also makes your project pucker up at the bottom. ^{[6]
  X
  Expert Source
  
  Jen Webber
  Knitting Specialist
  
  Expert Interview. 4 August 2020.}
Keep knitting 1 and casting off 1 until you've made it across the entire row. Stop casting off when you have only 1 stitch left on your right needle. ^{[7]
X
Research source}
You're almost done casting off! Once you have just 1 stitch left, cut a long yarn tail so you can tie off the last stitch. It's really important to secure the final stitch or your project could unravel. ^{[8]
X
Research source}
8
Wrap the tail around the needle and pull it through the stitch. To secure your last stitch, bring the yarn tail counterclockwise around the needle above the stitch. Hold the tail with 1 hand so it doesn't slip away and use your other hand to pick up the final stitch. Pull it to the tip of the needle and over the loop you just wrapped. Then, pull the tail through the last stitch and tighten it. ^{[9]
X
Research source}
- At this point, your project is off of the needles! You'll see a yarn tail at the end that you just cast off and a tail at the opposite end of your project where you cast on.

Part 2

Part 2 of 2:

Weaving in the Ends

Download Article

1
Thread a yarn tail through the eye of a tapestry or darning needle. You can find plastic or metal tapestry needles at local craft supply stores. These have a blunt end and a wide eye, which makes it easier to thread yarn through. Take 1 of your yarn tails and thread it through the eye of your needle. ^{[10]
X
Research source}
- Tapestry needles have slightly curved tips. Play around with straight darning needles or these curved tapestry needles to find which style you prefer.
2
Lay your project so the bumpiest side faces up. If you're weaving in a tail on a garter stitch pattern, you'll see bumps from the stitches on both sides, so you can weave on either side. If you're finishing a stockinette stitch project, turn it so the wrong side with the bumps faces up. ^{[11]
X
Research source}
- Garter stitches are made by knitting every stitch for all the rounds. Stockinette stitches are made by alternating knit and purl rows.
3
Insert the needle vertically through the bumps of 2 stitches. It doesn't matter which 2 stitches you use as long as they're close to the base of the yarn tail. Push your threaded needle under the bump of a stitch that looks like a smile or U. Bring the needle under the bump that's above it, which is shaped like a rainbow. ^{[12]
X
Research source}
- It's easier to hide the tail if you begin weaving close to the base of the yarn tail.
4
Slide your needle under the next horizontal stitch and bring it down. Once you've sewn up, it's time to weave down. Insert your needle down through the stitch that's to the right. Instead of going down vertically through another stitch, turn your needle to the left and weave it through the side of the earlier stitch. Then, pull the yarn gently to secure the tail. This makes a curved shape with the yarn. ^{[13]
X
Research source}
- If it helps you to remember, you're going down through a smile or U-shaped bump and diagonally under a rainbow bump.
It might seem tricky, but you're essentially weaving a curved shape that looks like folded ribbon. Slide your needle under the bump that's to the right and angle it to the left so you can bring it through diagonally.
You can continue weaving in the tail going up and down in a curved pattern as long as you like. Aim for weaving back and forth at 4 times before you cut the excess yarn tail close to the project. ^{[14]
X
Research source}
Since you have a yarn tail when you cast on and bind off, you'll always have at least 2 yarn tails to weave in. You might have even more if you had to change colors or add a skein of yarn. Remember to check your work for tails and weave each of them in the same way.
8
Block the project if you want it to hold its shape. If you're making a large blanket or loose scarf, it fine to begin using it right away. However, if you're making a knitted garment and you'd like it to keep its shape, steam the fabric or soak it in warm water. Squeeze out the moisture, then spread the knitted piece flat on a soft surface like an ironing board or a towel. Arrange your project so the edges are straight and leave it to dry. ^{[15]
X
Expert Source

Jen Webber
Knitting Specialist

Expert Interview. 4 August 2020.}
- In addition to helping the piece hold its shape, blocking your project will help even out the tension in the stitches. ^{[16]
  X
  Expert Source
  
  Jen Webber
  Knitting Specialist
  
  Expert Interview. 4 August 2020.}
- If you're worried that the fabric will curl in as it dries, stick a few sewing pins through the fabric near the edges and corners so the material holds its shape.

Expert Q&A

Search

Add New Question

Question

How do you bind off a project?

Jen Webber
Knitting Specialist
Jen Webber is a Knitting Specialist and the Manager of The Quarter Stitch, a crafting store based in the French Quarter of New Orleans, Louisiana. With over 17 years of knitting and crafting experience, Jen helps educate customers and the public on best knitting practices for their DIY projects.

Jen Webber

Knitting Specialist

Expert Answer

There are a few different ways to do it, but the most basic is that when you get to your last row, you knit two stitches, then move the loop of the first stitch over the loop of the second stitch. Then, you'll knit one more stitch and move the loop over that stitch. That way, you're reducing the number of stitches you have all the way to the end.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 3 Helpful 6
Question

When I'm finished knitting, what do I do with the last stitch?

Michele

Top Answerer

I usually leave a 6-10" tail then weave it back and forth to secure it and hide it within the knitting. Don't cut it off short as that can lead to unraveling, and after all your hard work, that's the last thing you want to happen.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 3 Helpful 12
Question

How do I change yarn in knitting?

SarahB

Community Answer

At the end of the last row (usually a purl row), in the color you are using, leave a long length of a wool "tail." On the next knit row start using the new color of yarn. Remember to leave about at least 6 inches extra yarn as a "tail." Don't knot the wool together where you've added a new color, as this will spoil your work. Use a darning needle to darn in the "tails" of wool on the wrong side of the work for a neat finish.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 8 Helpful 5