How to Fix a Jean Zipper

PDF download Download Article
PDF download Download Article

Jean zippers are usually tough and durable, but they do sometimes break. Depending on the problem, there are several ways that you can fix a broken zipper . You can remove top stops and teeth to get a zipper pull back onto the track, or you can cover up broken or missing teeth using a bottom stop. If your zipper is stuck or won't stay up, then there are some simple fixes you can try. However, if your zipper is broken beyond repair, then you may need to replace it.

Things You Should Know

  • To get a zipper back on the track, remove both top stops, a few teeth, and the zipper pull. Close the teeth with your fingers, then replace the pull and top stops.
  • Add a new bottom stop by removing the top stops and zipper pull, then close the teeth with your fingers and add a bottom stop above the broken teeth.
  • Grease or wax can unstick a zipper, while a key ring or safety pin can keep your zipper from unzipping. Replace any zipper that’s beyond repair.
Method 1
Method 1 of 3:

Getting a Zipper Back on the Track

PDF download Download Article
  1. The top stops are metal pieces at the top of the zipper that prevent the zipper from coming completely off of the track. Use pliers to remove the top stops. Pry the top stops apart to loosen them and then pull them off the zipper fabric. This will allow you to fix your zipper and get it back on the track on both sides. [1]
  2. Next, use the pliers to pull off 2 or 3 teeth from each side of the top of the zipper. Pry the teeth apart to loosen them and then pull them away from the zipper fabric. Removing these zipper teeth will make it easier to put the zipper back on the track. [3]
    • Make sure to pull off the same amount of teeth on each side of the zipper.
    • Discard these zipper teeth. You will not need them.
    Advertisement
  3. After you have removed the zipper teeth, you will be able to slide the zipper pull completely off of the track. Remove the zipper pull and set it aside. [4]
  4. Next, begin to reconnect the zipper teeth with your fingers. Press the teeth together as if you are zipping the zipper up from the bottom. Make sure that all of the teeth are interlocked with the teeth across from them. Connect the teeth all the way to the top of the zipper. [5]
  5. When all the teeth are interlocked, slide the zipper pull back onto the zipper at the top. As you do this, some of the teeth may come apart. Reconnect them if they do. Then, begin sliding the zipper pull down the length of the zipper. The teeth should open as you do this and this means that the zipper is back on the track. [6]
  6. Take the zipper top stops that you removed earlier and use your pliers to reconnect them to the zipper fabric. Replace each of the zipper stops right above the zipper teeth by squeezing them closed around the zipper fabric. There should be no gaps between the zipper teeth and top stops. [7]
    7. Advertisement
Method 2
Method 2 of 3:

Adding a New Bottom Stop for Broken or Missing Teeth

PDF download Download Article
  1. Adding a new bottom stop will prevent the zipper from sliding over broken teeth and getting stuck or coming off the track. If the broken zipper teeth are more than halfway down the fly, then you can fix the zipper by adding a new bottom stop. If the broken teeth are higher up on the zipper, then you will need to replace the entire zipper .
  2. Take off the top stops using a pair of pliers. Pry each of the top stops apart using the pliers and then remove them from the zipper fabric. Then, slide the zipper pull off of the zipper. [8]
    • Set the top stops and zipper pull aside.
  3. Next, use your fingers to manually close the zipper teeth. Start from the bottom of the zipper and work upwards. Press the teeth together a few at a time. They should be easy to lock into place. [9]
    • Line up the spot with the broken or missing teeth as well as you can.
  4. A bottom stop is a square metal piece with two prongs extending from the back of it. Press these prongs into the zipper fabric on both sides of the zipper teeth where the teeth are broken or missing. Then, turn use pliers to press the prongs down on the back side of the zipper. [10]
    • If you don't want to use a new zipper bottom stop, then you can also sew over the area with the broken teeth. However, you will need to sew over the area completely to prevent the zipper pull from going into this area and coming off the track.
  5. Next, take the zipper pull and slide it back onto the track at the top of the zipper. Make sure that the teeth are still closed and close any that open up as you are getting the zipper pull back on. Then, use your pliers to replace the top stops. Put them back onto the zipper fabric where they were before. [11]
    6. Advertisement
Method 3
Method 3 of 3:

Fixing Other Common Zipper Problems

PDF download Download Article
  1. 1
    Fix the zipper track if it's broken at the bottom. Use scissors to snip the zipper welt between the teeth, just above where the zipper pull begins to feed onto the teeth. Then, feed the znipped side into the top of the zipper pull and zip the zipper. [12]
  2. Use wax or grease to unstick a zipper . If the zipper is stuck, then rubbing wax or grease onto the zipper may help to loosen it and make it easier to open and close. Get a candle or some Crisco and rub it along the length of the zipper on both sides. Then, try to open and close the zipper. The zipper pull should move easily now. [15]
    • Be careful not to get the wax or grease onto the surrounding fabric.
  3. Add a keyring or safety pin to prevent a zipper from unzipping . If you have a zipper pull that simply will not stay up, then attaching a keyring or safety pin to the zipper pull can help to keep it in place. If you use a keyring, then you can loop the keyring around the jeans button when the zipper is up. If you use a safety pin, then you can insert the pin through the fabric near your zipper when the pull is up. [16]
    • Another option is to spray some hairspray onto your zipper to prevent it from sliding down as easily. Spray hairspray along the length of the closed zipper teeth. This should make them tacky enough that the zipper will not keep sliding down.
  4. Replace a zipper that is beyond repair. If the zipper is so broken that you cannot fix it, then you will likely need to replace it. Get a replacement zipper that is the same size and color as the original. Then, remove the old zipper with a seam ripper and sew in the new zipper .
    5. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    How do you fix a zipper that's broken at the bottom?
    Margo West
    Professional Tailor
    Margo West is a Professional Tailor and the Owner of Margo West Bridal Alterations in Dallas, Texas. She is renowned for her expertise in bridal alterations, custom wedding gowns, wedding-related design, and pattern making. Her 44 years of bridal experience has earned her the prestigious WeddingWire Brides Choice Award, Couples Choice Award 2013-2019, and The Knot Best of Weddings 2018-2020. Margo was also featured in House of Diffa 2018 Jacket Collection and Modern Luxury Brides Magazine 2020. She will launch her new bridal gown collection for fall 2021.
    Margo West
    Professional Tailor
    Expert Answer
    You'll need a needle, thread, and scissors. Move the slider to its lowest position, then use scissors to snip the opposite side of the zipper welt between the teeth, between the teeth and directly across from where the zipper pull. Feed the snipped side into the top of the zipper pull and zip the zipper—it should be functioning properly now. Repair the snipped area by sewing across the zipper from side to side across the sipper with a tight stitch. This will hold the teeth together and keep the zipper on track.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 0 Helpful 4
  • Question
    What type of company will repair a zipper?
    Community Answer
    A tailor would repair a zipper for you. If you can't find one, you can visit your local clothes shop and ask if they know a tailor. You can search online for your nearest tailor.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 5 Helpful 6
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!

      Things You'll Need

      • Pliers
      • Zipper bottom stop
      • Needle and thread
      • Hairspray
      • Grease or wax
      • Keyring or safety pin

      You Might Also Like

      How to
      Hand Stitch or Patch Holes in Clothes
      How to
      Thread a Drawstring Back into Clothes
      How to
      Shorten Jacket Sleeves
      How to
      Fix a Hole in a Shirt
      How to
      Darn a Hole
      How to
      Repair a Moth Hole
      How to
      Mend a Hole in Jeans by Hand
      How to
      Fix Holes in Shoes
      How to
      Fix Your Bra’s Wire and Keep It from Poking through Again
      Tailor Your Dress: Bigger, Smaller, or Tighter — The Easy Beginner's Guide
      How to
      Repair a Luggage Tear
      How to
      Take in a Dress
      Advertisement

      References

      1. ↑ https://www.youtube.com/watch?v=-QnVZ3NK7OA
      2. ↑ Margo West. Professional Tailor. Expert Interview. 7 December 2020.
      3. ↑ https://www.youtube.com/watch?v=-QnVZ3NK7OA
      4. ↑ https://www.youtube.com/watch?v=-QnVZ3NK7OA
      5. ↑ https://www.youtube.com/watch?v=-QnVZ3NK7OA
      6. ↑ https://www.youtube.com/watch?v=-QnVZ3NK7OA
      7. ↑ https://www.youtube.com/watch?v=-QnVZ3NK7OA
      8. ↑ https://www.youtube.com/watch?v=DUg3bgmSNEY
      9. ↑ https://www.youtube.com/watch?v=DUg3bgmSNEY
      1. ↑ https://www.youtube.com/watch?v=DUg3bgmSNEY
      2. ↑ https://www.youtube.com/watch?v=DUg3bgmSNEY
      3. ↑ Margo West. Professional Tailor. Expert Interview. 7 December 2020.
      4. ↑ Margo West. Professional Tailor. Expert Interview. 7 December 2020.
      5. ↑ Margo West. Professional Tailor. Expert Interview. 7 December 2020.
      6. ↑ https://www.liveabout.com/zipper-repair-zipper-wont-stay-up-1106411
      7. ↑ https://www.liveabout.com/zipper-repair-zipper-wont-stay-up-1106411

      About This Article

      Article Summary X

      To fix a jean zipper that’s stuck, rub a candle or some shortening along the length of the zipper on both sides to help loosen it and make it easier to open. Alternatively, if you have a zipper that will not stay up, spray some hairspray along the length of the closed zipper teeth. Once the hairspray sets, it should be tacky enough to prevent the zipper from sliding down. You can also try inserting a safety pin through the zipper pull and the fabric near your zipper after pulling the zipper closed. To learn more, like how to fix a zipper with broken or missing teeth, read on!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 476,510 times.

      Did this article help you?

      Advertisement