How to Fix a Toilet Tank Leak

PDF download Download Article
Quick fixes for your leaky toilet tank so you can stop wasting water
PDF download Download Article

A leaky toilet tank may cause some serious concern when you first discover the problem, but this is almost certainly going to be an easy problem to fix. Once you know what the source of the leak is, this should be a very straightforward process. In this article, we’ll show you how to find the source of the problem so that you can make the adjustment or repair you need. We’ll also break down each potential solution step by step.

Things You Should Know

  • Put food coloring in the tank to find where the water is coming out if you can’t figure out where the leak is.
  • To replace the flush valve holding the flapper in place, remove your tank and install a new set of gaskets where the opening feeds into the tank.
  • If the leak is in the tank, you likely need to replace the fill valve or tighten the two gaskets at the bottom of the tank.
Method 1
Method 1 of 4:

Finding the Source of the Leak

PDF download Download Article
  1. Locate the shutoff valve in the back of the toilet, below the tank. It’ll usually be connected to a pipe coming out of the wall, although it may feed into the floor. Turn this valve clockwise as far as you can to turn the water off. [1]
    • You can skip this process entirely if you know where the water is leaking from.
  2. Put the mark at the highest point where the water sits in the interior wall of the tank. This will help you identify if the water in the tank rises or falls over time. [2]
    • For best results, use a permanent marker. If you use a pencil, rising water levels may wash away the mark away.
    Advertisement
  3. Add a dye tablet or a few drops of food coloring to the water in the tank. Dyeing the water will help you follow where the water is going so that you can identify the leak. [3]
    • Wait for the dye to spread a few minutes before doing anything.
  4. If the water in the bowl has any trace of the dye you put in the tank, the water in the tank has leaked into the bowl. This means the cause of your leak is a faulty flush valve . [4]
  5. If the water has risen, this means there’s probably something wrong with the fill valve. If the water has gone down, there’s probably a leak in your flush valve . [5]
    • If the water level has gone up, check to see if there’s any water in the overflow tube (you’ll hear it draining normally). This indicates that the fill valve is leaking .
  6. If dyed water has seeped out from the bottom of the tank and onto the floor, this probably means you’ve got a leaky gasket. If dyed water has come out of the body of the tank, the tank itself may be cracked . [6]

    Tip : Toilets may develop condensation on the exterior of the tank during hot weather or when you’re taking a very hot shower. This “tank sweat” is harmless.

    7. Advertisement
Method 2
Method 2 of 4:

Flush Valve

PDF download Download Article
  1. Drain all of the water out of the tank. If you can’t flush the toilet for some reason, you can also use a cup or a hose to remove the water from the back of the tank. [8]
  2. The tank is attached to the wall by the supply tube and attached to the toilet bowl by two bolts underneath the tank. Use an adjustable wrench to loosen and remove these nuts so you can remove the tank. [9]
    • You may need to use a flathead screwdriver to hold the bolts in place as you turn the nuts under the tank.
  3. Place the tank upside down next to the toilet bowl on a stable surface. If you want to avoid water getting on the floor, put some towels down and place the tank on top of these. [10]
    • Placing the tank upside down will give you direct access to the flush valve on the bottom of the tank.
  4. This is the large nut, called a spud washer, in the middle of the tank that holds the flush valve in place. Once you’ve unscrewed the spud washer, simply push on the flush valve to pop it out. [11]
    • The spud washer is normally the culprit when it comes to a leaky flush valve. Unfortunately, you can’t normally replace the spud washer alone. You need a whole new valve with a perfectly-fitting washer.
    • If you’re encountering a lot of trouble, use a plumber’s wrench to unscrew the locknut.
  5. Push the new flush valve down against the tank opening to install it. Follow the manufacturer’s instructions to ensure you install the new valve properly. [12]
    • You can buy a new flush valve at any retailer that sells home improvement supplies.
  6. Reattach any parts of the flush valve that you disconnected when you were removing the old one. Be sure to replace the gasket over the locknut, as well. [13]
  7. Tighten the nuts that you previously loosened that affix the tank to the supply tube and to the toilet bowl. Once the tank has been reattached, turn the water supply back on and refill the tank. [14]
    • Once the installation is complete, flush the tank to ensure that the leak is fully gone. If it isn’t gone, check to make sure the leak isn’t coming from somewhere else.
    • If water is still leaking into the toilet bowl, go back and make sure you’ve fully tightened the bolts attached to the flush valve.
    8. Advertisement
Method 3
Method 3 of 4:

Fill Valve

PDF download Download Article
  1. Turn the water supply valve in back of the toilet all the way clockwise to turn off the supply. [15] Remove the water from the tank by flushing the toilet once the water’s been turned off. [16]
    • You can also use a cup or a shop vac to get the water out of the tank.
  2. This is the tube immediately beneath the location of the fill valve on the bottom of the tank. Use a wrench to turn this tube counterclockwise to disconnect it. [17]
    • Depending on your toilet model, the supply line will either be a long, rigid pipe or a short tube connected to the water supply shutoff valve.
    • Put a towel or bucket under the supply line if you want to keep your floor dry. There’s probably a little water left in your supply line.
  3. This is the nut located underneath the tank that holds the fill valve in place. Use a small wrench or pair of pliers to loosen and remove the locknut. [18]
  4. Take the lid off of the top of the tank, if you haven’t already. Pull the old valve directly upwards in order to remove it from the tank. [19]
    • Make sure your tank is bone dry if you want to avoid a mess! If you remove the fill valve with water still in the bottom of the tank, that water will fall out of the hole where the fill valve used to be and end up on the bathroom floor. [20]
  5. Place the new fill valve in the tank and install it per the instructions. Set the new fill valve in the spot where you just removed the old valve and screw the locknut onto the bottom of it. Attach the refill tube to the side of the fill valve and orient it over the overflow tube in the tank. [21]
    • Note that you will need to adjust the float to match the height requirements for your new fill valve.
  6. Once the water supply has been turned back on, flush the toilet to test the new fill valve. If it fills correctly and doesn’t overflow, it’s fixed and you're good to go! [22]
    • If you’re still experiencing problems with water leakage, your toilet may have a more serious problem. Call a plumber to have them diagnose the problem and see if it can be repaired.
    7. Advertisement
Method 4
Method 4 of 4:

Tank Gaskets

PDF download Download Article
  1. Turn the water supply valve behind the toilet clockwise to turn off the water supply. Once the water’s been turned off, flush the toilet to empty out the tank. [23]
    • You can also use a cup or a shop vac to get the water out of the tank.
  2. These are the 2 bolts at the very bottom of the tank. Look on either side of the flapper to locate the heads of the bolts. Look underneath the tank to find the corresponding rubber washers. [24]
  3. Use a flathead screwdriver to hold the bolts in place. Then, use the adjustable wrench to turn the bolts clockwise underneath the tank. Continue tightening the bolts until you feel a heavy amount of resistance and it becomes difficult to hold the screwdriver still. [25]
    • Don’t tighten the bolts so hard that you end up cracking the porcelain tank. If that happens, you’ll have to replace the entire tank.
  4. Turn the water supply back on to allow the tank to refill. Wait a few minutes, then look underneath the tank to see if it’s still leaking. If there’s no more leak, the gasket has been fixed. [26]
    • If the gaskets still leak, replace them with a fresh set of gaskets .
    5. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    Can a toilet leak without you knowing?
    James Schuelke
    Professional Plumber
    James Schuelke, along with his twin brother David, is the co-owner of the Twin Home Experts, a licensed plumbing, leak detection, and mold inspection company based in Los Angeles, California. James has over 32 years of home service and business plumbing experience and has expanded the Twin Home Experts to Phoenix, Arizona and the Pacific Northwest.
    James Schuelke
    Professional Plumber
    Expert Answer
    Yes, especially if the leak is in the tank. To see if your toilet tank is leaking, lift the lid on your tank and check if the water level has gone up or down. This might mean water is leaking into or out of you tank.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 0 Helpful 2
  • Question
    How do you know what part of the toilet to replace?
    David Balkan
    Professional Plumber
    David Balkan is a Professional Plumber, CEO of Balkan Sewer and Water Main Service, and President of Balkan Sewer and Drain Cleaning. As a hands-on owner of these companies for over 40 years, David is knowledgeable about water service lines, sewers, and drain line issues. David is a Committee Chairman of the Master Plumbers Council and has sat on the Executive Committee of the Sub Surface Plumbers Association of New York for over 30 years. His knowledge and solution-oriented approach contributed to Balkan Sewer and Water Main Service being the largest and most trusted service in New York City and the recipient of the 2017 Angie’s List Super Service Award.
    David Balkan
    Professional Plumber
    Expert Answer
    If you're not sure, just buy a kit with all the pieces—they're pretty inexpensive. Then, just turn off the water supply and swap everything out. That way, you don't lose hours trying to figure out if it's a washer, or a spring, or some other small part.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 3 Helpful 10
  • Question
    My toilet is leaking where the water supply line enters the tank. How do I fix it?
    Community Answer
    Either the washer inside the tank is flawed or the nut underneath is not tight enough. Turn the water valve to the toilet off at the supply, either at the wall or floor. Then flush the toilet. The tank will now only have a couple inches of water. Try to turn the flush valve gently. If it moves easy and you do not see the washer squeeze out or a break in the washer, simply tighten the nut underneath the tank. You can buy a new flush valve for around $20.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 5 Helpful 16
See more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!

      Things You'll Need

      You Might Also Like

      How to
      Detect Toilet Leaks
      How to
      Fix a Running Toilet: Your Ultimate Guide
      How to
      Shut Off Your Toilet’s Water Supply
      How to
      Know when a Wax Ring Is Bad
      How to
      Quickly and Easily Unclog a Toilet
      How to
      Remove and Replace a Toilet Tank
      How to
      Fix or Replace a Toilet Flapper
      How to
      Reseal a Toilet: Replacing Wax Seals
      How to
      Fix a Toilet That Bubbles and Gurgles When Flushed
      How to
      Fix an Overflowing Toilet: Expert-Approved Tips
      How to
      Fix a Loose Toilet Seat
      How to
      Unclog a Toilet with Baking Soda
      How to
      Fix a Stuck Toilet Handle
      How to
      Fix a Slow Toilet
      Advertisement

      References

      1. ↑ James Schuelke. Professional Plumber. Expert Interview. 1 October 2019.
      2. ↑ https://www.thisoldhouse.com/bathrooms/21017864/how-to-fix-a-leaky-or-runny-toilet
      3. ↑ https://www.youtube.com/watch?v=_iOntqeVGOU#t=37s
      4. ↑ https://www.youtube.com/watch?v=vj4TP55-FO0#t=2m4s
      5. ↑ James Schuelke. Professional Plumber. Expert Interview. 1 October 2019.
      6. ↑ https://www.thisoldhouse.com/bathrooms/21017864/how-to-fix-a-leaky-or-runny-toilet
      7. ↑ David Balkan. Professional Plumber & CEO of Balkan Sewer & Water Main. Expert Interview. 23 February 2021.
      8. ↑ https://www.insider.com/guides/home/how-to-fix-a-running-toilet
      9. ↑ http://www.home-repair-central.com/how-to-fix-a-leaking-toilet-tank.html
      1. ↑ http://www.home-repair-central.com/how-to-fix-a-leaking-toilet-tank.html
      2. ↑ http://www.planitdiy.com/how-to/plumbing/how-to-replace-a-flush-valve/
      3. ↑ http://www.planitdiy.com/how-to/plumbing/how-to-replace-a-flush-valve/
      4. ↑ http://www.planitdiy.com/how-to/plumbing/how-to-replace-a-flush-valve/
      5. ↑ http://www.planitdiy.com/how-to/plumbing/how-to-replace-a-flush-valve/
      6. ↑ James Schuelke. Professional Plumber. Expert Interview. 1 October 2019.
      7. ↑ https://www.insider.com/guides/home/how-to-fix-a-running-toilet
      8. ↑ https://www.bobvila.com/articles/how-to-replace-toilet-fill-valve/
      9. ↑ https://www.bobvila.com/articles/how-to-replace-toilet-fill-valve/
      10. ↑ https://www.bobvila.com/articles/how-to-replace-toilet-fill-valve/
      11. ↑ James Schuelke. Professional Plumber. Expert Interview. 1 October 2019.
      12. ↑ https://www.bobvila.com/articles/how-to-replace-toilet-fill-valve/
      13. ↑ https://www.bobvila.com/articles/how-to-replace-toilet-fill-valve/
      14. ↑ https://www.insider.com/guides/home/how-to-fix-a-running-toilet
      15. ↑ https://youtu.be/aSaTHL3sZTQ?t=27
      16. ↑ https://youtu.be/F20NuU37qeY?t=112
      17. ↑ James Schuelke. Professional Plumber. Expert Interview. 1 October 2019.

      About This Article

      Article Summary X

      To fix a leaky toilet, start by running a few simple tests to figure out what's causing the leak. For example, the source of your leak might be the flush valve, fill valve, or gasket, and the fix for each type is different. Once you know what kind of leak you're dealing with, you can address it! Flush valves usually need to be replaced, which you can do easily with a wrench. Gaskets typically need to be tightened with a wrench, but you'll also need a screwdriver to complete the job. Finally, a leaky fill valve can be fixed with a replacement valve. Be sure to turn the water supply to the toilet off before you attempt any repairs! To learn more about how to fix your specific leak, keep reading!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 489,081 times.

      Reader Success Stories

      • Anonymous

        Jul 17, 2017

        "This let me know I'm not crazy lol! Never did it before, but I had it right in my head. Thank you!"
      More reader stories Hide reader stories
      Share your story
      If you buy through links on our site, we may earn a commission .

      Did this article help you?

      Advertisement