PDF download Download Article PDF download Download Article

There’s nothing more frustrating than getting a bad night’s sleep because your bed is squeaking. Fortunately, you don’t need to spend a lot of money on a new bed frame to get the squeaking to stop. By pinpointing the source of the squeak and tightening and lubricating the joints holding your bed frame together, you can stop the squeaking and start sleeping peacefully again.

Part 1
Part 1 of 3:

Finding the Cause

PDF download Download Article
  1. The box spring is the wooden base underneath the mattress. Lay the mattress and box spring on the floor. [1]
  2. You’ll want to rule it out as the cause of the squeaking before you start working on the bed frame. Get on the mattress and move around a little bit - if it squeaks, you know the mattress is the culprit. [2]
    Advertisement
  3. Apply pressure to the top of the box spring and move it around. If you hear squeaking, it's probably the box spring rather than the bed frame that's causing the problem. [3]
  4. Squeaking can occur where the posts attach to the rest of the bed frame, so try rocking each post. Try to pinpoint the exact location that the squeaking is coming from.
  5. The slats are the metal or wooden planks that stretch from one side of the bed frame to the other. They’re what hold up the mattress and box spring. Apply pressure to the slats to see if they're causing the squeaking. [4]
    • Wood rubbing against wood will often cause squeaking.
  6. Advertisement
Part 2
Part 2 of 3:

Stopping the Squeaking

PDF download Download Article
  1. Check to see what’s holding the bed frame together in the area the squeaking is coming from. If it’s a screw, get a matching-size screwdriver. If it’s a bolt, you’ll need a wrench.
  2. Sometimes all that’s causing a bed frame to squeak is a loose joint. Before you take apart the bed frame, try tightening any screws and bolts in the area the squeaking is coming from. You’ll know they’re tight enough when you can’t turn them anymore. [5]
  3. If you can't get a bolt to tighten all the way up against the frame, place a washer in between the frame and the bolt to fill in the extra space. [6]
  4. Use your tools to loosen and remove the bolts or screws holding the joint together. Place any loose bolts or screws in a plastic bag so you don’t lose them. Separate the two pieces of the bed frame that make up the joint. [7]
  5. Apply a lubricant to any surface where both parts of the joint come into contact, including any fasteners, hooks, or flat surfaces. [8] Some good lubricants you can try are:
    • Paraffin. Paraffin is a waxy substance that comes in bar form, making it easy to rub on surfaces. [9]
    • WD-40. WD-40 is a spray on lubricant that works well on metal bed frames, but it eventually dries out. [10]
    • Candle wax. If you don’t have access to a store-bought lubricant, try using candle wax. Rub the candle wax on like you would with any other waxy lubricant. [11]
    • White grease or siliconized lubricant. Purchase white grease or a siliconized lubricant from the hardware store and apply it to the joint components to keep the squeaking at bay.
  6. Put back all of the screws and bolts you removed and tighten them with your tools. Make sure they’re tightened all the way so you don’t accidentally cause more squeaking to occur.
  7. Rock the bed and see if you can still hear squeaking. If the squeaking persists, try to pinpoint where it’s coming from. If it’s coming from a different joint than the one you worked on, follow the same steps you did for the other joint. If the squeaking is coming from the same joint, try tightening the bolts or screws holding the joint together some more.
  8. Advertisement
Part 3
Part 3 of 3:

Trying a Quick Fix

PDF download Download Article
  1. Use old socks or shirts that you don't wear anymore. The fabric will prevent the box spring or mattress from rubbing against the bed frame and squeaking. [12]
  2. Check the bed frame for any spaces where the mattress or box spring could potentially move and rub against the frame. Stick cork into the gaps so every component of the bed is firmly in place. [13]
  3. A leg is uneven if it doesn't touch the floor. Put a towel in the space between the leg and the floor so the bed frame doesn't wobble and make noise. [14]
  4. If the squeak is coming from one of the slats, remove the mattress and box spring and place a book on the squeaking slat. Move the mattress and box spring back onto the bed frame. [15]
  5. Advertisement

Expert Q&A

Ask a Question
      Advertisement

      Tips

      • If there’s a gap in one of the joints that’s contributing to the squeaking, apply a felt strip between the two surfaces that meet and form the joint to fill in the empty space. [16]
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Thanks for submitting a tip for review!
      Advertisement

      About This Article

      Article Summary X

      To stop a squeaking bed frame, move each of the bed’s posts and slats to see where the sound is coming from. If it’s coming from one of the posts, tighten all of the screws or bolts on it and wiggle it again to see if the squeaking stopped. Take the joint apart if it’s still squeaking and lubricate the whole joint with paraffin wax or WD-40. If the squeaking is coming from a slat, wrap the slats in old clothes to reduce friction. Keep reading for tips from our Contractor reviewer on how to use towels to level the bed frame and reduce squeaking.

      Did this summary help you?
      Thanks to all authors for creating a page that has been read 1,262,753 times.

      Reader Success Stories

      • Art S.

        May 11, 2016

        "Great article. Listening for the sound of the offending part is key. For me, tightening the right screws solved the ..." more
      Share your story

      Did this article help you?

      Advertisement