How to Make a Traditional Origami Crane (with Visuals)

Download Article

Simple step-by-step instructions for making the most iconic piece of origami art

Co-authored by Amy Guerrero and Dan Hickey

Last Updated: December 16, 2024 Fact Checked

Download Article

Video

|

Q&A

ARTICLE

VIDEO

When most people think of origami, their mind jumps straight to the elegant paper crane. The idea of folding a paper crane yourself might seem intimidating at first, but the process is super straightforward and even first-time origami makers can make one in just a few minutes. In this article, we’ll show you how to make a traditional origami crane step-by-step (with visuals to help you bring your beautiful bird to life). All you need is a square of paper and a flat surface. Let’s get started!

Things You Should Know

Use traditional origami paper in the shape of a square for the best results. Choose paper with a color or design you enjoy to make your paper crane pop.
Make all of your folds slowly and carefully. Line up corners or edges as perfectly to each other as you can for the sharpest looking crane.
Display your crane on a tabletop or shelf, give it as a gift, or make 999 more and string them together to make your own senbazuru !

1

Lay down your origami paper color-side-up.

Download Article

Choose square origami paper with a design you enjoy. Then, lay your paper flat with the colored side facing up. Traditional origami paper is thin but durable and measures 6 in by 6 in (15 cm by 15 cm), but 3 in (7.6 cm) and 10 inches (25 cm) are common too. ^{[1]
X
Research source}
- In a pinch, cut any rectangular piece of paper into a square if you don’t have origami paper.

2

Make two diagonal folds.

Download Article

Fold the top right corner down to meet the bottom left corner. Then, crease the fold. Unfold the paper and then repeat on the other side, bringing the top left corner down to meet the bottom right corner. Crease the fold, then unfold the paper. Now you have a large X-shaped crease in your paper. ^{[2]
X
Research source}
- Use your fingers, a ruler, or a bone folder tool to make neat, crisp creases.
- Making these kinds of folds is called making a valley fold.

3

Fold the paper into rectangles.

Download Article

Flip the paper over and fold the right edge over to meet the left edge. Then, crease the fold. This will look like a vertical rectangle. Unfold the paper, then fold the top edge down to meet the bottom edge, forming a horizontal rectangle. Crease the fold, then unfold the paper without flattening it out. ^{[3]
X
Research source}
- You now have creases in the shape of an “X” and a “+” spanning your paper, dividing it into 8 triangles.

4

Make an accordion fold.

Download Article

Bring all 4 corners together along the creases to form a square. First, angle the paper so one corner is facing you (like a diamond shape). Bring the side corners inward to meet the bottom corner. Because of your earlier creases, the top corner will also fold neatly and meet at the same point as the side and bottom corners. ^{[4]
X
Research source}
- Let the paper fold naturally along the creases you made earlier.
- The resulting square has an open end where all 4 corners of the paper come together (facing you). It also has 2 flaps on the right and 2 flaps on the left. ^{[5]
  X
  Research source}

5

Create a squash fold.

Download Article

Work with the top layers only (not the bottom flaps on the left or right). Crease the folds. You now have a kite shape on top of your square base. Finish the squash fold by folding the triangular tip of the kite shape down. ^{[6]
X
Research source}

6

Undo and open the squash fold.

Download Article

Unfold the top and side corners to return to your square base shape. Then, grab the bottom corner (top layer only) and lift it up and back (toward the top corner). The crease from when you folded the top of the kite shape down will act like a “hinge” for the fold, and the side corners will fold in to meet at the center. ^{[7]
X
Research source}
- The resulting shape looks like a thin, vertical diamond (top layer) on top of your square base (bottom layer).
- Once you’ve gotten the diamond shape, flatten all of the folds and creases.

7

Repeat the squash fold on the backside of the paper.

Download Article

Turn over your paper, then make a new squash fold. Fold the left and right corners (top layer only) in to meet the vertical center crease, then fold the triangular tip of the resulting kite shape down. Then, unfold the top and side corners and open up the squash fold like you did on the other side of the paper. ^{[8]
X
Research source}
- Flatten the second squash fold as well.
- The paper now looks like a 2-layer diamond with 2 “legs” at the bottom.

8

Taper the legs of the diamond.

Download Article

Work with the top layer only, starting on either side of the paper. Crease the folds. Flip the paper over and do the same on the other side. The paper now resembles a skinny kite. ^{[9]
X
Research source}

9

Make a book fold on both sides of the paper.

Download Article

Make sure the right corner of the kite is now touching the left corner. This fold is like turning the page of a book (hence the name “book fold”). Flip the paper over and repeat on the back side—fold the top layer of the right side of the kite over the center crease. ^{[10]
X
Research source}

10

Fold the bottom corners up.

Download Article

Make a crease along the fold. Then, flip the paper over and repeat on the backside—lift the bottom corner up to meet the top corner, then crease. ^{[11]
X
Research source}

11

Do another book fold on both sides of the paper.

Download Article

Make sure to only fold the top layer so the right corner is lined up perfectly with the left corner, then crease the fold. Flip the paper over and repeat—fold the right corner over the vertical center crease and line it up with the left corner. ^{[12]
X
Research source}

12

Pull out the pointed tabs beneath the top layer.

Download Article

Look for the 2 points on either side of the topmost corner. Pull the left point out to the left and down until it’s aligned vertically with the leftmost corner below it. Then, pinch the base of the paper on the left side to crease and hold the tab in place. Repeat on the right side of the paper. ^{[13]
X
Research source}
- One of these pointed tabs will be the tail and one will become the head. Choose one to fold into the head (either one will work).

13

Fold the head of the crane.

Download Article

Bend one of the side points down to resemble a beak. Then, use your thumbnail to reverse the crease in the head (this is called an inside-reverse fold). Pinch the head to secure the crease and form the beak. ^{[14]
X
Research source}
- For the best look, fold the head down about 1 in (2.5 cm) from the tip.
- Leave the pointed tab on the other side untouched (it will be the tail).

14

Fold the wings down.

Download Article

Grab the top corner of one layer and fold it down, then crease the fold. Repeat on the other side of the paper to create the second wing. Turn the crane upside down and use your fingers to “fluff” the body of the crane to give it some 3-dimensional shape so it can stand. ^{[15]
X
Research source}
- Once the wings are folded and the body is fluffed up, your crane is ready for display!
- Display your crane on a flat surface, like a coffee table or shelf, give it as a gift, or make 999 more and string them together to make a senbazuru.

Community Q&A

Search

Add New Question

Question

Is it harder to make a paper crane with writing paper?

Community Answer

Yes, normal writing paper is much harder to use than origami paper because the origami paper is lighter yet stronger, which makes it easier to fold and shape. Writing paper is flimsier and liable to tear.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 142 Helpful 476
Question

What is the meaning of the paper crane?

Community Answer

Traditionally, it was believed that if one folded 1000 origami cranes, one's wish would come true. It has also become a symbol of hope and healing during challenging times. As a result, it has become popular to fold 1000 cranes (in Japanese, called “senbazuru”).

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 81 Helpful 221
Question

What is the usual size for origami paper?

Community Answer

It usually is 6 or 7 inches. You can find big books of origami paper in craft stores. Origami paper is perfectly square.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 131 Helpful 288

See more answers

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Video

Read Video Transcript

Reader Videos

Tips

Work slowly and carefully throughout the process, making sure to line up your edges and corners as cleanly as possible to get the sharpest looking end result.

Thanks
Helpful 6 Not Helpful 5
The crisper your creases, the more easily they’ll fold in later steps.

Thanks
Helpful 3 Not Helpful 5

Submit a Tip

All tip submissions are carefully reviewed before being published

Name

Please provide your name and last initial

Submit

Thanks for submitting a tip for review!

You Might Also Like

[1]

[2]

[3]

[4]

[5]

[6]

[7]

[8]

[9]

[10]

[11]

[12]

[13]

[14]

[15]

Log in

How to Make a Traditional Origami Crane (with Visuals)

Things You Should Know

Steps

Lay down your origami paper color-side-up.

Make two diagonal folds.

Fold the paper into rectangles.

Make an accordion fold.

Create a squash fold.

Undo and open the squash fold.

Repeat the squash fold on the backside of the paper.

Taper the legs of the diamond.

Make a book fold on both sides of the paper.

Fold the bottom corners up.

Do another book fold on both sides of the paper.

Pull out the pointed tabs beneath the top layer.

Fold the head of the crane.

Fold the wings down.

Community Q&A

Video

Reader Videos

Tips

You Might Also Like

References

About This Article

Reader Success Stories

Did this article help you?

Quizzes

You Might Also Like

Featured Articles

Trending Articles

Featured Articles

Featured Articles

Watch Articles

Trending Articles

Quizzes

Explore Categories