How to Hang Blackout Curtains

PDF download Download Article
PDF download Download Article

Blackout curtains can be very useful for blocking out light when you are trying to sleep, especially for young children or shift workers who sleep during the day. Many major home decor suppliers carry blackout curtains, or you can make your own with blackout fabric and a little sewing skill. Measure your window frame, choose the product that suits your needs, and enjoy sleeping in peace! [1]

Part 1
Part 1 of 3:

Measuring Your Window

PDF download Download Article
  1. [2] Hook a tape measure on a top corner of your window frame and pull it down to the bottom edge of the frame. Then do the same on the other side and in the middle, in case your window is not perfectly square. [3]
    • If you already have a curtain rod, you only need to measure from the curtain rod to where you want the curtains to end.
    • If you do find that your window is a different length on 1 side, keep the longest measurement.
  2. Most curtain rods are hung at least 4 inches (10 cm) above the top of the window frame. You may want to hang yours even higher to give the illusion of height to your windows and make the room seem taller. [4]
    • Don’t add more than 8 inches (20 cm) to the length, as hanging curtains this high can look awkward. [5]
    • You may also want to add 4 to 6 inches (10 to 15 cm) to your length to make your curtains hang down further below the window frame, which will block more light. [6]
    Advertisement
  3. Take a tape measure and find the width of the top, middle, and bottom of your frame. [7] If the measurements are different, use the widest one.
    • If you are installing a new curtain rod, you should plan to buy one that is at least 2 to 6 inches (5.1 to 15.2 cm) longer than the width of your frame.
  4. To make the blackout curtains more effective, and create a more attractive look, you will want your curtains to have plenty of depth. In order to have enough material for the curtains to fold over themselves several times, they should be at least 2.5 times as wide as your frame. [8]
    • For instance, if your frame is 3 ft (0.91 m) wide, you will want curtains that are 7.5 ft (2.3 m) wide.
  5. To buy a curtain rod that extends far enough out from your window frame, you will need to know the depth of the frame. Use a tape measure or ruler to measure the distance from the wall to the point where your frame extends the farthest. [9]
    6. Advertisement
Part 2
Part 2 of 3:

Choosing the Right Products

PDF download Download Article
  1. If you already have curtains and just want to make them darker, you can purchase blackout liners instead of full curtains. These typically clip on to the inside of the curtains, or have holes that allow them to attach to your current curtain rings.
    • Make sure to get accurate measurements of your existing curtains before you buy liners.
  2. If you want a room to be as dark as possible at night but still sunny during the day, you may want to buy a blackout roller shade instead of curtains. These shades are usually installed without a rod and can be easily rolled up when not in use.
    • You can hang sheer curtains on the same window to use during the day.
  3. If you want to block as much light as possible, make sure the curtains you buy are 100% blackout. If you just want to make a room slightly darker, however, you may prefer to use a lower percentage. [10]
  4. Even light-colored curtains that are labeled as 100% blackout will not block light as well as dark-colored ones. Black curtains, or dark blue, grey, or brown, are ideal. [11]
  5. Blackout curtains tend to be heavier than regular curtains. Look at the curtain rods you currently have, and if they are very thin or bow slightly when you tug on the curtains, you may want to replace them with something sturdier.
  6. If you are installing a new curtain rod with your blackout curtains, look for a return rod, or a wraparound rod. These rods have smooth corners on the ends that allow the curtain to slide all the way to the wall, which will prevent light from entering at the sides. [12]
  7. Some fabric companies sell blackout curtain material by the yard. You can also just use a heavy material like velvet or wool, but it won’t be as effective. Buy enough fabric to fit the measurements you took and hem the edges. [13]
    • To hang the curtain on your rod, make another hem along the top of the curtains that is large enough to slide the rod through.
    • If you don’t like the look of the blackout fabric, you can buy another material as well and use this as the outside of the curtain.
    8. Advertisement
Part 3
Part 3 of 3:

Installing Your Blackout Curtains

PDF download Download Article
  1. [14] Most curtain rods come with brackets that must be fastened to the wall so the rod can sit in them. Measure up 4 inches (10 cm) and out 1 to 3 inches (25 to 76 mm) on each side to find where your brackets should be placed, and mark it with a pencil. [15]
    • Hold the brackets in place and mark where the holes for the screws are on the wall. You can also trace around the edge of the bracket for further reference.
  2. Once you have determined the placement of each bracket, take a long ruler or board and hold it up between the two marks. Place a level on top of the ruler to check if the two placements are even with each other. [16]
    • If you find that they are not even, measure and mark again.
  3. Many curtain rods will come with hollow plastic pegs called wall anchors that can be driven into your wall to hold the screw. This helps keep the weight of the curtain from damaging the wall.
    • Drill or nail a pilot hole in the place where the wall anchor will go. Make sure the hole is not larger than the anchor itself. [17]
    • Use a hammer to gently tap the anchor into the pilot hole.
  4. Once you have inserted the wall anchors, hold the brackets in place so that their holes line up with the wall anchors. Then use a drill to fasten the brackets to the wall with screws.
    • If your curtain rod did not come with screws, make sure you use screws that are the same size as the wall anchors.
  5. Your curtain most likely has either holes, rings, or a hem that the curtain rod can be slipped through. If it has rings, make sure all the rings are lined up in the same direction and not twisted.
  6. You may need to use a stepladder or chair to reach the brackets. Most rods rest on top of the brackets, although some may be inserted from the side, which will require collapsing and extending the rod to fit it between the brackets.
    7. Advertisement

Expert Q&A

Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Tips

      • If light is still getting in around the edges of your curtains, you can stick adhesive-backed velcro to the inside edges of the curtains and the walls or window frame to fasten the curtain in place when it’s being used. [18]
        Thanks
        Helpful 0 Not Helpful 0
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Things You’ll Need

      • Tape measure
      • Blackout curtains or liners
      • Return curtain rod (optional)
      • Pencil
      • Level tool
      • Drill

      You Might Also Like

      How to
      Hang a Curtain Rod: An Easy DIY Guide
      How to
      Hang Curtains
      How to
      Hang Curtains with Drapery Hooks & Curtain Rings
      2 Ways to Hang a Ceiling-Mount Curtain Rod (With or Without Drilling)
      How to
      Hang Curtains over Vertical Blinds
      How to
      Hang Pinch Pleat Curtains
      How to
      Hang Eyelet Curtains
      How to
      Hang Curtains in a Bay Window
      How to
      Hang a Curtain Swag
      How to
      Hang Voile and Curtains Together
      How to
      Divide a Room with Curtains
      How to
      Choose a Curtain Rod for Your Window Decor
      Advertisement

      References

      1. ↑ Angelica Savard. Home Stager, Realtor, & Interior Designer. Expert Interview. 30 April 2020.
      2. ↑ Angelica Savard. Home Stager, Realtor, & Interior Designer. Expert Interview. 30 April 2020.
      3. ↑ https://www.bobvila.com/articles/how-to-install-curtain-rods/#.Wn5tSejwbIV
      4. ↑ http://www.womansday.com/home/decorating/a6411/how-to-hang-curtains/
      5. ↑ https://www.bobvila.com/articles/how-to-install-curtain-rods/#.Wn0vbujwbIU
      6. ↑ Angelica Savard. Home Stager, Realtor, & Interior Designer. Expert Interview. 30 April 2020.
      7. ↑ Angelica Savard. Home Stager, Realtor, & Interior Designer. Expert Interview. 30 April 2020.
      8. ↑ http://www.housebeautiful.com/home-remodeling/interior-designers/tips/a2819/hanging-curtains-mistakes/
      9. ↑ https://www.bhg.com/decorating/window-treatments/basics/how-to-hang-curtains/
      1. ↑ https://homesteady.com/info-8447952-do-blackout-curtains-work.html
      2. ↑ https://homesteady.com/info-8447952-do-blackout-curtains-work.html
      3. ↑ https://www.bobvila.com/articles/how-to-install-curtain-rods/#.Wn5zX-jwbIV
      4. ↑ https://www.makeit-loveit.com/make-your-curtains-blackout-curtains-simplified-version/
      5. ↑ Angelica Savard. Home Stager, Realtor, & Interior Designer. Expert Interview. 30 April 2020.
      6. ↑ https://www.bobvila.com/articles/how-to-install-curtain-rods/#.Wn0vbujwbIU
      7. ↑ https://www.bobvila.com/articles/how-to-install-curtain-rods/#.Wn0vbujwbIU
      8. ↑ http://womenyoushouldknow.net/fix-it-friday-anchors-aweigh-how-to-put-anchors-into-walls/
      9. ↑ https://homesteady.com/info-8447952-do-blackout-curtains-work.html

      About This Article

      Thanks to all authors for creating a page that has been read 91,956 times.

      Did this article help you?

      Advertisement