PDF download Download Article PDF download Download Article

Scarves can brighten up a room the same way they brighten up an outfit. Hang your scarves like tapestries by making dowel hangers. Alternatively, make a wall plaque out of Styrofoam. For a more durable decoration, try a shadow box. Instead of stuffing a beautiful scarf into the back of your closet, let it bring fresh colors and patterns to your home.

Method 1
Method 1 of 3:

Making a Dowel Hanger

PDF download Download Article
  1. Spread the scarf over a flat surface and use a ruler to measure its dimensions. 1 of these sides wraps over the dowel later. If you need to conserve wall space, measure and then hang the scarf's shorter side. [1]
    • To help you choose a side to measure, figure out how much wall space you have available.
  2. Select the dowels that are 1 2  in (1.3 cm) in diameter, getting 1 for each scarf you wish to hang. Using a handsaw, cut the dowels down to match the length of the side you wish to hang. [2]
    • Dowels are sold at most craft supply stores as well as home improvement stores.
    • For example, if your scarf is 12 in (30 cm) long, cut the dowel the same length.
    Advertisement
  3. Turn your iron to the proper heat setting before using it. The settings you use depend on the fabric your scarf is made of. Press out all the wrinkles, taking care not to damage the fabric.
  4. You will need a box of upholstery tacks from a craft store. Wrap between 1 to 3 in (2.5 to 7.6 cm) of the scarf over the dowel. Then, pin the scarf in place on 1 end. Continue placing tacks every 1 in (2.5 cm) along the dowel. [3]
  5. Select a pattern of ribbon that compliments your scarf. Measure out a length of ribbon 3 in (7.6 cm) longer than the dowel. Cut the ribbon to length with scissors. [4]
    • Twine can be used as a stronger but less colorful option. Both twine and ribbon can be found at craft stores.
  6. Lay the ribbon flat next to the dowel. Tack an end to each of the dowel's ends. Next, lift the ribbon up to test it. Make sure the tacks are pressed in tightly so the ribbon doesn’t come loose.
  7. Select a spot on the wall to hang the scarf. Simply hammer a nail into that spot, then drape the ribbon over the nail. The scarf hangs flat, so its design is always visible. [5]
    • The dowels can also hang from curtain rods or other spots.
    • Scarves can hang from clothing hangers or shower curtain rings without a dowel. Slip the hanger onto a wall-mounted rod, then pull the scarf through the hanger. Pinning isn’t required this way.
  8. Advertisement
Method 2
Method 2 of 3:

Creating a Wall Plaque

PDF download Download Article
  1. Get a square or rectangular 1 in (2.5 cm) thick piece of Styrofoam from a craft store. The Styrofoam should be about 3 in (7.6 cm) shorter than the scarf on all sides. [6]
    • Canvas can also be used in place of Styrofoam. It’s a stronger, less messy material that is easier to hang, but it can’t be cut down to a specific size. Use it by following the same steps.
  2. Drape the scarf over the Styrofoam, allowing the ends to hang off the sides. The scarf’s sides should overhang the Styrofoam by at least 3 in (7.6 cm). If the scarf doesn’t hang over enough, you will need a smaller piece of Styrofoam. [7]
    • Instead of buying another piece of Styrofoam, try cutting larger pieces with a blade or alternative tool.
  3. Wrap 1 of the scarf’s ends tightly against the Styrofoam. Push straight pins through the fabric and into the Styrofoam’s sides. Tuck the scarf’s corners in and pin them in place too. Then, repeat this on the other sides. [8]
    • Straight pins can be purchased at craft stores or wherever else sewing supplies are sold.
  4. Choose a spot on the wall to hang the scarf, then prepare a pair of 1 in (2.5 cm) nails. Hang them where the center of the plaque will rest. Space the nails 2 in (5.1 cm) apart, side by side. [9]
  5. Line up the plaque so the Styrofoam touches the nails. The scarf itself should not come into contact with them. Push the plaque straight back to drive the nails into the Styrofoam. Let go and the plaque should hang in place.
  6. Advertisement
Method 3
Method 3 of 3:

Assembling a Shadow Box

PDF download Download Article
  1. Shadow Boxes are like picture frames that have compartments to display multiple objects. Most craft stores sell them in various sizes. Select a Shadow Box large enough to contain 1 scarf. Push the box’s glass out and set it aside for now.
    • Instead of a shadow box, you can put the scarf behind a floating frame or plexiglass. Lay the scarf flat on the bottom frame, then place the top frame over it. You don’t have to trim the scarf. [10]
  2. Fold the scarf as needed to get it into the box. This scarf is a background for anything else you place in the box. Press the scarf against the box’s back end to flatten the fabric as much as possible. [11]
    • If you are using a smaller box and a scarf you don’t plan on wearing, you can trim the scarf to size using scissors.
  3. Pick up a tube of fabric glue from the craft store. Squeeze the glue underneath the scarf, then pat the scarf flat against the box's back liner. Spread glue underneath the rest of the scarf until it is secured to the back of the box. [12]
  4. At this point, the shadow box is ready to be hung on the wall. However, you can add extra decorations to the box's small compartments. Fill them with other scarves, keepsakes, and mementos to create a unique piece of art. [13]
    • For example, you can cut small pieces off other scarves and glue them on top of the first scarf.
    • You can fill the shadow box with pictures, postcards, shells, or other objects. Get creative, and use glue dots, pins, and wires to secure everything to the scarf.
  5. Set the glass on top of the Shadow Box. Everything underneath the glass should stay in place. Use the grooves in the back of the box to place nails in the wall. Then, slide the box onto the nails.
  6. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    What is the best way to display scarves?
    Garrison Hullinger
    Interior Designer
    Garrison Hullinger is an Interior Designer and the President of Studio Garrison. With more than 15 years of experience, he specializes in client-centered design that balances beauty and warmth with comfort and functionality. Garrison and GHID’s work has been featured in numerous publications such as The New York Times, The Wall Street Journal, and Interior Design Magazine. Garrison attended Oklahoma Christian University.
    Interior Designer
    Expert Answer
    Take some sort of rustic ladder (or a couple pieces of vertical board with some rungs) and lean it up against the wall. Then, you could tie the scarves over each of the different rungs as a means to creatively display your accessories.
Ask a Question
      Advertisement

      Tips

      • For the best results, match the scarf with other colors and patterns in your room. Create a cohesive room theme.
      • If you plan on wearing the scarf again, use less permanent display tactics. Cutting and sealing a scarf behind glass is only a good idea when you feel certain about doing it.
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Thanks for submitting a tip for review!
      Advertisement

      Things You’ll Need

      Making a Dowel Hanger

      • Wood dowels
      • Handsaw
      • Iron
      • Upholstery tacks
      • Ribbon
      • Scissors

      Creating a Wall Plaque

      • Styrofoam or canvas
      • Straight pins
      • Nails

      Assembling a Shadow Box

      • Shadow Box
      • Fabric glue
      • Scissors
      • Nails

      Expert Interview

      Thanks for reading our article! If you’d like to learn more about interior design, check out our in-depth interview with Garrison Hullinger .

      About This Article

      Thanks to all authors for creating a page that has been read 51,180 times.

      Did this article help you?

      Advertisement