Adding photos and artwork to your walls can really make your home feel like your own space. Keeping your picture level and hanging it at the right height can be tough, especially if it’s the first thing you’re putting up. With a few tricks, you can make sure your picture is secure on the wall to display photos in your home in just a few minutes.
Steps
-
Attach hanging hardware to the back of your frame if you need to. Some picture frames come with hanging wires or crossbars already attached. If yours doesn’t, buy a picture hanging kit from the hardware store and attach a wire or a crossbar using 2 screws to the back of your frame. Crossbars are great for small, thin frames, while wire hangers give more support to heavy or wide frames. [1] X Research source
- This hardware will make your picture more sturdy, and it will be much easier to hang this way.
-
Find a stud if your picture is heavier than 15 pounds (6.8 kg). Use a stud finder to look for a stud in your wall, then mark it with a pencil. Heavy frames need the sturdiness of a stud, or they could potentially fall off wood, drywall, and plaster walls. [2] X Research source
- You can also knock on the wall to find a stud. If you knock and it sounds hollow, there’s no stud there. If it sounds firm or dull, you’ve found a stud.
- If you can’t find a stud, drill an anchor into your wall before you hang up your picture. You can find wall anchors at most hardware stores.
Advertisement -
Hold the picture where you’d like to hang it on your wall. If you want your picture at eye level, put it about 57 inches (140 cm) up from the floor. If you’d like to make a gallery wall with multiple pictures, you can arrange them in a random pattern to cover your entire wall at whatever height you’d like. [3] X Research source
- If you’re hanging multiple pictures on the wall, try arranging them in a collage so they are randomly spaced out.
- Take into account what’s around your picture, like furniture and light fixtures. Make sure that it isn’t being blocked by anything else in the room.
Tip: If you have a family member or a friend around, ask them to hold the picture up so you can take a step back to look at the placement.
-
Mark the top center of the picture with a pencil. Lightly make a mark on the top edge of the picture in the very center. This will help keep your place on the wall when you take the picture away. [4] X Research source
- If you’re worried about making a mark on your wall, use a piece of painter’s tape instead.
-
Measure from the top of the picture to the hanging hardware. Take your picture down from the wall and flip it over so that the back is facing upwards. Hook a measuring tape onto the hanging wire and pull it taut so the wire stretches up toward the top of the frame. Then, measure how far the wire is from the top of the frame by looking at your tape measure. [5] X Research source
- This measurement will help your picture hang at exactly eye level instead of a little bit above it.
- If your picture has a crossbar instead of a hanging wire, measure the distance from the crossbar to the top of the picture.
-
Mark the wall with the measurement you just took. Take your tape measure and bring it back over the mark you made on your wall. Place your tape measure over the mark, then make a second mark at the measurement you just took that shows how far the wire is from the top of the frame. [6] X Research source
-
Pound a small nail into the wall for pictures lighter than 5 lb (2.3 kg). Super small pictures don’t need much to keep them in place on wood, drywall, and plaster walls. Take a nail and align it with your lower mark on the wall, then pound in the nail with a hammer at a 45-degree angle until it sticks out about 1/3 of the way. Keeping the nail at an angle will be much sturdier than one parallel to the ground. [7] X Research source
- You can also find plated nails that have a small disk at the front to stop them from going too far into the wall.
-
Drill a picture hook into the wall for pictures around 10 pounds (4.5 kg). Medium-sized pictures need a little more hardware than just a nail. Grab a picture hook and line the bottom of it up with the second mark you made on the wall. Then, use a screw to drive the hook into the wall through the hole at the top. Make sure the screw is pushed in as far as it can go so it’s secure. [8] X Research source
- Picture hooks can grab onto crossbars or hanging wire, so you don’t have to worry about what’s on the back of your picture.
- If you are drilling into concrete or brick, use a masonry bit on your drill and push an anchor into your wall before you add a screw.
EXPERT TIPInstallation ExpertPeter Salerno is the owner of Hook it Up Installation, a professional installation company, which has been hanging art and other objects around Chicago, Illinois for over 10 years. Peter also has over 20 years of experience installing art and other mountable objects in residential, commercial, healthcare and hospitality contexts.Expert Warning: Make sure you have permission to drill if you aren't the property owner. Find out what the stipulations are for hanging pictures. Some buildings with concrete walls limit how far you can drill into the wall, and some won't allow you to drill into the concrete at all.
-
Slide the picture onto the hardware in the wall. Hold the picture straight up and down and carefully put it onto the hardware in the wall, making sure that the wire or the crossbar on the frame catches. You can adjust the picture later, so don’t be worried if it isn’t completely even yet. [9] X Research source
- Try not to catch any part of the frame on the hardware, or you could scratch it.
-
Adjust your picture if it’s not level. Place the level on top of the picture. If the bubble measure remains in the center of the level, then your picture is hung straight. If the bubble is off to one side, adjust the picture until the bubble is in the center of the level by tilting the frame back and forth. [10] X Research source
- You can find levels at most hardware stores, or you can download one on your smartphone.
-
Clean the surface of your picture with rubbing alcohol. Dab a small amount of rubbing alcohol onto a cloth or paper towel. Wipe down the back of your picture frame to clean it off so the surface is smooth and dust-free. Wait for the alcohol to dry for about 5 minutes. [11] X Research source
- A clean surface will adhere to your hanging tool much better.
-
Peel the backs off one side of the adhesive strips. The adhesive strips are double-sided, so you can work with one side at a time. Take the backing off of one side so that one part is sticky, but leave the backs on the other side. [12] X Research source
- Working with one side at a time will give you more control over where your picture goes.
-
Push the sticky backs onto the back of the picture frame. Depending on how large your picture is, you may need 2 to 6 adhesive strips. Put an equal amount down each side of the picture so that it stays secure on your wall. [13] X Research source
- Most adhesive strips can hold up about 15 pounds (6.8 kg). If your picture frame is much heavier than that, you may want to choose a different method for hanging.
Warning: Always attach the adhesive strips to the frame, not the center of your picture. Since the strips are sticky, they could tear or damage any paper or cardboard in the picture frame.
-
Take the backs off the other side, then push them onto the wall. Now you can peel the backing off the second side of the adhesive strips. Hold your picture up to the wall and make sure it’s straight, then carefully push the entire thing onto the wall with steady, even pressure. [14] X Research source
- You won’t be able to adjust the picture after you push it onto the wall, so make sure it’s perfectly aligned.
- To take your picture off the wall, pull the frame up and off the back of the adhesive strips. Then, pull the adhesive strips down and away from the wall to take them off.
Community Q&A
-
QuestionShould window or door molding be considered when centering a picture vertically?Community AnswerYes, it generally should. You want to make sure that the picture is at the right height, but more importantly, use the molding as a reference so that the picture is not crooked.
-
QuestionHow far down the frame should I position the hanging wire screws?Community AnswerThere's no exact answer to this. It depends on the length of the wire you use. You can position the screws near the top or closer to the middle, placed on the sides of the back of the frame. The key is this: decide whether or not you want the wires to show above the frame (they're usually not visible). Put the screws in place on the frame, measure how much wire you need, allow for some stretch, then fasten the wire to the frame.
-
QuestionHow high on the wall should a picture be hung?Community AnswerThis is subjective to your taste but most people opt for about eye level.
Video
Tips
- Gather all your materials before you start hanging your picture so you don’t have to run back and forth.Thanks
Warnings
- Keep the artwork out of the way when measuring and drilling. You would not want to accidentally damage the piece.Thanks
Things You'll Need
Choosing and Marking a Spot
- Hanging kit
- Tape measure
- Pencil or painter’s tape
Using Nails and Hooks
- Nail, picture hook, or wall anchor
- Hammer or drill
- Level
Hanging with Adhesive Strips
- Rubbing alcohol
- Cloth
- Adhesive strips
References
- ↑ https://www.bobvila.com/articles/picture-hanging-tips/
- ↑ https://www.youtube.com/watch?v=_ugKARUatkM&feature=youtu.be&t=106
- ↑ https://www.youtube.com/watch?v=_ugKARUatkM&feature=youtu.be&t=26
- ↑ https://www.youtube.com/watch?v=_ugKARUatkM&feature=youtu.be&t=27
- ↑ https://www.youtube.com/watch?v=_ugKARUatkM&feature=youtu.be&t=33
- ↑ https://www.youtube.com/watch?v=F7_K_pqXRaw&feature=youtu.be&t=74
- ↑ https://www.youtube.com/watch?v=F7_K_pqXRaw&feature=youtu.be&t=69
- ↑ https://www.youtube.com/watch?v=F7_K_pqXRaw&feature=youtu.be&t=128
- ↑ https://www.architecturaldigest.com/story/our-guide-to-hanging-art-like-a-professional
- ↑ https://www.bobvila.com/articles/picture-hanging-tips/
- ↑ https://www.youtube.com/watch?v=6bTdtnzPmOE&feature=youtu.be&t=26
- ↑ https://www.youtube.com/watch?v=6bTdtnzPmOE&feature=youtu.be&t=45
- ↑ https://www.youtube.com/watch?v=6bTdtnzPmOE&feature=youtu.be&t=54
- ↑ https://www.youtube.com/watch?v=HJ9RZt0_qMk&feature=youtu.be&t=25
About This Article
To hang a picture, hold it up against the wall where you want it to hang, then use a pencil to mark the wall along the top center of the frame. Lay the picture face down on a flat surface and hook a measuring tape on the hanging wire on the back of the picture, then pull the wire up towards the top of the picture until it is taut. Measure the distance from the top of the picture to the wire, and use this measurement to determine where to place your nail or hook. Slide the hanging wire onto your nail implement and use a level to make sure the picture is straight. If you want to learn how to hang your picture so it's level, keep reading the article!
Reader Success Stories
- "I was unsure of the best height to hang pictures, as I am not so tall, so good advice, thanks. Also , good tip to measure and mark midpoint of frame on wall then measure and mark hanging wire distance to get exact position to hammer nail/picture hook." ..." more