How to Harden Steel

Co-authored by Himesh Patel and Hunter Rising

Last Updated: December 4, 2024 Approved

Steel is a common durable alloy, and while most steel used in tools is already tough, you can harden it even more to prevent wear and tear. Hardened steel prevents knife blades from dulling and tools from bending and breaking. With a simple heating and quenching process, you can make your steel last for much longer!

Part 1

Part 1 of 3:

Heating the Steel

Download Article

1
Light a propane blow torch to use as a heat source. Open the gas valve near the base of the torch. Hold a striker over the end of the torch and squeeze it to create a spark. The torch should ignite after a few tries. Turn the gas valve to adjust the flame to a small cone shape. ^{[1]
X
Research source}
- Larger flames produce less heat while smaller flames produce a higher heat.
- Blow torches only heat a small concentrated area. For larger pieces of steel, you need to use a forge in order to heat the whole thing.
Safety Precautions

Always wear goggles and gloves when operating a propane blow torch.

Before operating your torch, read all instructions so you know how to handle it safely.
2
Hold the steel directly in the flame. Hold the steel with your non-dominant hand using a pair of metal tongs so you aren’t near the flame. If you can’t hold the steel with tongs, set it on a larger fireproof work surface. Use the torch with your dominant hand to heat the entire steel piece before focusing the flame on the area you want hardened, such as the end of a screwdriver or chisel. ^{[2]
X
Research source}
- Wear thick gloves so you don’t burn yourself.
- Work on a metal or steel surface, such as an anvil, to avoid any fire hazards.
Advertisement
3
Wait until the steel turns cherry-red in color. Watch for the color of the steel to change as it gets hotter. When the steel is a bright cherry-red, about 1,400 °F (760 °C), then it’s been heated enough to strengthen the steel. ^{[3]
X
Research source}
- The actual temperature of the steel depends on the carbon content inside. Higher carbon contents will take longer to heat.
- Another good test for determining when the steel is ready is seeing if a magnet sticks to its surface. If the magnet doesn’t stick, it’s ready to be pulled away from the heat. ^{[4]
  X
  Research source}

Part 2

Part 2 of 3:

Quenching the Metal

Download Article

1
Fill a heat-safe container with water or oil deep enough to submerge your steel. Use a coffee can or similarly shaped container as your quenching chamber. Pour in water or vegetable oil so it’s 2–3 inches (5.1–7.6 cm) from the rim of the container. Make sure the oil or water is at room temperature.
- This step should be done before heating the steel, as the steel should be quenched immediately after removing from heat. ^{[5]
  X
  Research source}
- Water is great for rapidly quenching the hot metal, but it could cause thin steel to distort or crack.
- Vegetable oil has a higher boiling point, so the hot steel will take longer to cool and reduce the chance of it cracking. However, oil may spill and create a fire hazard if the steel is put into the oil too quickly.
2
Transfer the heated steel directly to your quenching medium. Use your tongs to carry the steel while it’s still hot to your container. Stand back as you completely submerge the steel in the water or oil since it will create steam or splash out. Keep holding onto the steel so you don’t have to fish it out later. ^{[6]
X
Research source}
- Quenching the steel rapidly cools it so the alloys inside harden together.
- Wear thick gloves and a face mask before you quench your steel so the water or oil doesn’t splash onto your hands.
- Keep a grade B fire extinguisher nearby in case of a fire.
The water or oil will continue to boil as the heat transfers from the steel. Keep the steel completely submerged until there is no more steam or bubbles, which should only take a few minutes. Set the steel back on your work surface when you’re finished. ^{[7]
X
Research source}

Quenched steel is harder, but it becomes more brittle. Don’t drop or try to bend the steel once it’s removed.
Water is corrosive to steel and could cause damage if it’s left on the surface. Wear gloves while you use a shop cloth to dry the steel completely. ^{[8]
X
Research source}

Part 3

Part 3 of 3:

Tempering in an Oven

Download Article

1
Preheat your oven to 375 °F (191 °C). Let the oven heat completely before you place your steel inside. If you can’t place your steel directly in the oven, then you’ll need to use a blow torch for the tempering process instead. ^{[9]
X
Research source}
- Use a smaller toaster oven if your piece of steel fits inside. That way, you can still use your oven for the rest of the evening.
Set your steel directly on the oven rack or on a baking sheet. Let your oven heat the piece of steel. During the tempering process, the steel heats up enough to soften the alloys inside to make it less brittle. ^{[10]
X
Research source} ^{[11]
X
Research source}

If you need to use a blow torch, focus the flame tip on the area you want hardened. Keep heating the steel until you notice a blue color form on the metal. This signifies that the steel is tempered.
3
Turn off the oven and let the steel cool inside it overnight. Once the steel’s been heated for 3 hours, let the steel cool slowly. This allows the steel to normalize and keep its hardened structure. Take the steel out of the oven the following morning. ^{[12]
X
Research source}
- If you tempered the steel with a blow torch, set the metal on an anvil or another large steel surface to conduct the heat. ^{[13]
  X
  Research source}

Community Q&A

Search

Add New Question

Question

I heat treated a piece of carbon steel to make it less likely to wear (using its edge as a cutting surface in a wood turning application). I now want to reverse the process so I can drill and tap the metal tip. How do I do this?

Community Answer

Heat the area you'd like to drill just until it starts to glow red, then allow it to cool slowly. This answer was tested with a utility knife blade and it drilled through with ease.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 44 Helpful 111
Question

How do I harden a steel hammer so that is lasts longer and is more durable?

Community Answer

This is not advisable. Hardening will cause it to be more brittle, which could cause the hammer to chip and cause injury.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 47 Helpful 112
Question

Can a softly tempered piece be re-tempered harder without going through the hardening procedure again?

Community Answer

No. The tempering reduces the amount of martensite and thus makes the steel softer. Heating it again to a lower temperature will not introduce additional martensite. The only way to do that is to heat it until the metal de-magnetises, quench it again, and then temper to the desired hardness.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 33 Helpful 53

See more answers

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Video

Tips

Submit a Tip

All tip submissions are carefully reviewed before being published

Name

Please provide your name and last initial

Submit

Thanks for submitting a tip for review!

Warnings

Keep a fire extinguisher near your workstation in case of a fire.

Thanks
Helpful 4 Not Helpful 2
Don’t touch the metal with your bare hands since it could cause severe burns.

Thanks
Helpful 4 Not Helpful 3
Wear safety glasses and gloves while working with hot metal.

Thanks
Helpful 3 Not Helpful 2

Things You’ll Need

Blow torch
Striker
Steel
Metal tongs
Safety glasses
Work gloves
Heat-safe container
Vegetable oil or water
Shop cloth
Oven

[1]

[2]

[3]

[4]

[5]

[6]

[7]

[8]

[9]

[10]

[11]

[12]

[13]

Log in

How to Harden Steel

Steps

Heating the Steel

Quenching the Metal

Tempering in an Oven

Community Q&A

Video

Tips

Warnings

Things You’ll Need

You Might Also Like

References

About This Article

Reader Success Stories

Did this article help you?

Quizzes

You Might Also Like

Featured Articles

Trending Articles

Featured Articles

Featured Articles

Watch Articles

Trending Articles

Quizzes

Explore Categories