How to Hem Shirts

PDF download Download Article
PDF download Download Article

Shirts rarely come in a one-size-fits all. Even if the shirt fits you around the chest, waist, and shoulders, there is no guarantee that it will be the right length. Fortunately, shortening and hemming shirts is quite easy. How you go about doing it, however, will differ depending on the style of shirt you are altering as well as the material.

Method 1
Method 1 of 4:

Hemming a T-Shirt

PDF download Download Article
  1. If you don't already know how short you want to cut your shirt, put it on, and make a mark on it where you want the new hem to be. You can use a dressmaker's chalk, dressmaker's pen, or even a sewing pin for this. Take the shirt off when you are done, and keep it turned inside out.
    • This may also work on other shirts made from stretchy material. It is not recommended for shirts made out of woven material, such as linen, due to fraying.
  2. If you want to be extra neat, draw a line using a dressmaker's chalk or pen first, so you will know where to cut. Use a ruler to measure up from the bottom edge of the shirt as you draw the line. This will ensure that the shirt will be the same length all around.
    Advertisement
  3. This will be the inside of your hem. Your shirt should now be the exact length you want it to be. You don't have to double-fold or finish the raw edge, because T-shirt material does not fray much, if at all. If you want a nicer finish on the inside, then you can serge the raw edge, but it is not necessary.
  4. Make sure that you use a heat setting that is safe for the material your shirt is made out of. This will give your shirt a nice, crisp edge all along the bottom.
  5. If you do not own a sewing machine, or if you do not know how to sew, slip some iron-on hem tape into the hem first. The results will be stiffer, but at least you won't have to do any sewing.
  6. Use a color that matches your shirt, and remove the pins as you sew. For a more professional finish, you can use a double-pointed needle. Alternatively, you can sew a second line right beneath the first one; this only works with the stretch-stitch, however.
    • If you are using iron-on hem tape , simply iron over the hem following the instructions on the package.
    • Be sure to sew back and forth over the start and end of your sewing a few times to prevent unraveling.
    • Try to start sewing at one of the side seams. This will help conceal the start and end of your sewing better.
    Expert Answer
    Q

    When asked, "What are some skills to practice when you're first learning how to hem?"

    Lois Wade

    wikiHow Crafts Expert
    Lois Wade has 45 years of experience in crafts including sewing, crochet, needlepoint, cross-stitch, drawing, and paper crafts. She has been contributing to craft articles on wikiHow since 2007.
    EXPERT ADVICE
    Answer from Lois Wade :

    DIY crafting and sewing expert, Lois Wade, responded: "You want to take evenly sized stitches, spaced close enough together so that your hemmed edge has no sags, puckers or gaps. If hemming a curved edge, you'll find that you need to either gather the sewn edge more closely, or loosen it somewhat in order to allow the hemmed edge to lay flat when sewn."

  7. Your shirt is now ready to wear!
    8. Advertisement
Method 2
Method 2 of 4:

Hemming a T-Shirt Using the Original Hem

PDF download Download Article
  1. If you want to, you can put the shirt on to determine the new length. Keep in mind that your shirt will be about ½ to 1 inch (1.27 to 2.54 centimeters) longer, depending on how wide the original hem is.
  2. Spread the shirt out on a flat, even surface, right-side-out. Use a ruler to measure up from the bottom edge of the shirt every so often. This will ensure that your shirt is the same length all the way around. [1]
    • If you can't find a dressmaker's chalk or pen, you can make the line using sewing pins instead; just be careful not to pin both sides of the shirt together.
  3. Keep folding your way all around the shirt. It should now be a little shorter than before.
    • You are still folding on the outside of the shirt. Do not fold the hem on the inside.
  4. Use the zigzag stitch or the stretch stitch on your sewing machine . Make sure that your thread color closely matches your shirt. [2]
  5. Keep your shirt right-side-out. You should now see the original hem, the hem's original stitching, and your new "seam" just above it.
  6. Focus on the new seam you made. This will flatten it, and make the bottom of your shirt smoother. If you'd like, you an secure the hem with sewing pins, although this is not necessary.
  7. Anywhere between â…› to 3/16-inch (3.2 to 4.3 millimeters) away will be plenty. [3] Use a stretch stitch for this step, and be sure to go back and forth over the start and end of your sewing a few times to prevent unraveling.
    • Start sewing from one of the side seams. This will help hide the start and end of your sewing better.
    • If you secured your hem with sewing pins, be sure to pull them out as you sew.
  8. Try to cut as close to your stitching as you can. Discard the excess material, or save it for another project. When you are done, go back over your shirt and snip off any excess or loose threads.
  9. Your shirt is now ready to wear.
    10. Advertisement
Method 3
Method 3 of 4:

Hemming a Button-Up Shirt

PDF download Download Article
  1. If you need to, put your shirt on first. You are making the shirt longer, because you will be folding the hem twice to conceal the raw edges and prevent fraying.
    • This method may work with other non-button-up shirts made from woven material, such as tunics and peasant blouses.
  2. Spread your shirt out on a flat surface in front of you, with the inside facing you. Draw a line along the bottom edge of the shirt. Use a ruler to measure up from the bottom edge of the shirt to the line that you are drawing. This will ensure that the line is an even distance from the bottom edge of the shirt. Most button-up shirts have a curved hem, so your line should curve as well.
    • If you want your shirt to have a flat bottom, simply draw a line straight across the bottom of the shirt. Align it with the shortest part of the shirt, usually at the side seams.
  3. [4] When you are done, you should have a shorter shirt, with a line drawn all along the bottom edge.
  4. You are folding the hem up by ½ inch (1.27 centimeters), so the first line that you drew should now be inside the hem, right along the crease. [5]
  5. Make sure that you are using a heat setting that is suitable for the material you are working with.
  6. This will give you a clean, professional-looking hem. The raw edges should now be concealed inside the hem. [6]
  7. Secure the hem with sewing pins, then sew as close to top edge of hem as you can using a straight stitch. An easy way to do this is to align the edge of the sewing machine's foot with the bottom edge of the shirt. Remove pins as you sew, and be sure to use a thread color that matches the fabric of your shirt.
    • Remember to sew back and forth over the start and end of your sewing. If your shirt is not a button-up shirt, start sewing at one of the side seams. This will conceal the beginning and ending of your sewing better.
  8. Your shirt is now ready to wear!
    9. Advertisement
Method 4
Method 4 of 4:

Hemming a Button-Up Shirt Using Bias Tape

PDF download Download Article
  1. If you can't find a matching color, choose a neutral color that is a similar shade. For example, if you have a dark blue shirt, and you can't find any dark blue bias tape, get black bias tape. If you have a light blue shirt, and can't find any matching bias tape, get some light grey bias tape instead.
    • This method works great on shirts that you are sewing from scratch!
  2. How much longer you cut it depends on the width of your bias tape. This will typically be about ½ inch (1.27 centimeters).
  3. Make sure that you are pinning the right side of the bias tape to the right side of the shirt. You will eventually be folding the bias tape inside the shirt.
    • Leave about 1 inch (2.54 centimeters) of extra bias tape to either side of the shirt.
  4. Use the crease along the bottom fold of the bias tape as a guide.
  5. Fold the bias tape down first, then fold it inside your shirt. The raw edges should now be under the bias tape. The bias tape also should not be visible from the outside. The seam between the bias tape and the shirt will be right along the bottom edge of the shirt.
  6. Use a heat setting that is suitable for the material you are working with. Each fabric will require a different heat setting.
  7. If you'd like, you can clip the corner of the bias tape first to reduce bulk.
  8. Sew with the inside of the shirt facing you, so that you can get as close to the top edge of the bias tape as possible. Use a bobbin thread that matches your shirt color, and a sewing thread that matches your bias tape color.
    • Remember to sew back and forth a few times at the start and end of the shirt.
    • Pull out the pins as you go.
  9. Your shirt is now ready to wear!
    10. Advertisement


Community Q&A

Search
Add New Question
  • Question
    What is matching thread?
    Craftsmart
    Top Answerer
    Thread that's the same color of the fabric. If the fabric is multicolored, choose one of the colors or go for a neutral color like white or black.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 0 Helpful 4
  • Question
    Can I do any of these by hand?
    Community Answer
    Yes. Simply follow the article, then use the techniques described in How to Hand Sew a Hem . You can also use iron-on hem tape, although the results may be a little stiffer. If you are working with stretchy material, remember to keep your stitching loose.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 1 Helpful 2
  • Question
    How do you sew a stretch stitch?
    Community Answer
    Stitches such as a zigzag stick are stretch stitches, which as the name suggests, can stretch. If you sew a straight stitch, it will not stretch and the elastic won’t work as well.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 1 Helpful 1
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Tips

      • If your shirt has a pattern on it, use a thread color that either matches the background color, or one of the designs on it.
        Thanks
        Helpful 1 Not Helpful 0
      • If you don't own a sewing machine, or don't know how to sew, you an use iron-on hem tape instead. Be sure to follow the directions on the package.
        Thanks
        Helpful 0 Not Helpful 0
      • You can make an asymmetrical hem, if you'd like.
        Thanks
        Helpful 0 Not Helpful 0
      Show More Tips
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      Advertisement

      Things You'll Need

      Hemming a T-Shirt

      • T-shirt
      • Fabric scissors
      • Sewing pins
      • Iron
      • Sewing machine (or iron-on hem tape)
      • Mathing thread (not needed if using iron-on hem tape)
      • Ruler (recommended)
      • Dressmaker's chalk or pen (recommended)

      Hemming a T-Shirt Using the Original Hem

      • T-shirt
      • Fabric scissors
      • Sewing pins (optional)
      • Iron
      • Sewing machine
      • Mathing thread
      • Ruler (recommended)
      • Dressmaker's chalk or pen (recommended)

      Hemming a Button-Up Shirt

      • Button-up shirt
      • Fabric scissors
      • Sewing pins
      • Iron
      • Sewing machine
      • Mathing thread
      • Ruler
      • Dressmaker's chalk or pen

      Hemming a Button-Up Shirt Using Bias Tape

      • Button-up shirt
      • Single-fold bias tape
      • Fabric scissors
      • Sewing pins
      • Iron
      • Sewing machine
      • Matching thread
      • Ruler
      • Dressmaker's chalk or pen


      You Might Also Like

      How to
      Design Your Own T Shirt
      How to
      Modify Your T Shirt
      How to
      Turn an Oversized T Shirt Into a Hot Mini Dress
      How to
      Shrink a Cotton Shirt in Boiling Water or the Washing Machine
      How to
      Make a Baby Romper from a T Shirt
      How to
      Hand Sew a Hem
      How to
      Hem a Dress by Hand
      How to
      Sew a Hem
      How to
      Hem a Skirt
      How to
      Blind Hem Stitch
      How to
      Hand Stitch a Rolled Hem
      How to
      Hem a Shirt Sleeve
      How to
      Remove Hem Marks
      How to
      Hem
      Advertisement

      References

      1. ↑ https://americantwoshot.com/how-to-hem-a-shirt/
      2. ↑ https://fashionopenstudio.com/how-to-hem-a-shirt/
      3. ↑ https://americantwoshot.com/how-to-hem-a-shirt/
      4. ↑ https://www.youtube.com/watch?v=lfynGEsynwU
      5. ↑ https://www.youtube.com/watch?v=lfynGEsynwU
      6. ↑ https://www.youtube.com/watch?v=lfynGEsynwU

      About This Article

      Article Summary X

      To hem a t-shirt, cut your shirt 1/2 an inch longer than you want it to be. Turn your shirt inside-out and fold the hem up so it’s the exact length you want it. Iron the hem so it’s flat, then sew with a sewing machine. For advice on how to hem a button up, or use a shirt’s original hem, read on!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 522,052 times.

      Reader Success Stories

      • Anonymous

        Jun 10, 2017

        "The clear pictures and descriptions helped a lot. I tried to follow the same steps on a YouTube video, but this was ..." more
      Share your story

      Did this article help you?

      Advertisement