Download Article
Learn about asphalt drying and curing times—and how to keep your new driveway looking fresh
Download Article
A new asphalt driveway can really spruce your home or office. The clean look and smooth driving experience can make it well worth the cost—but how long should you wait before driving or parking on new asphalt? It’s an important question. Drive on it too soon, or park in one spot for too long, and you’ll damage your driveway before it’s had a chance to dry or fully cure. Do things right, though, and your driveway could stay in great shape for years to come. Looking to take care of your new asphalt driveway? Keep reading to learn the essentials, including how long to wait before driving on asphalt and how to maintain it to make it last.
Things You Should Know
- Asphalt takes up to 5 days to dry and 6-12 months to fully cure. “Dried” asphalt is no longer sticky and soft, while “cured” asphalt is fully hardened.
- You can safely drive and park on asphalt after about 5 days, but the curing process will continue for several months. [1] X Research source
- Ask your contractor for an estimate of the curing time. When in doubt, err on the side of caution and assume it’ll take 12 months.
- To prevent indentations and cracks, park your car in a slightly different spot every day for the first 6-12 months. Use fillers and sealers to fill in cracks and holes as they appear.
Steps
Section 2 of 3:
When can you drive or park on new asphalt?
Download Article
-
You can safely drive and park on asphalt once it’s dry. You’ll know it’s dry when it’s no longer soft and sticky to the touch. This usually takes about 5 days. At this point, you won’t risk leaving tire marks or damaging your new driveway.- You can usually walk on asphalt 2 days after it’s applied. However, you’ll still have to wait 5 days before driving on it. [3] X Research source
- Your contractor may give you specific instructions for when it’s safe to walk, drive, and park on your new driveway.
-
Park your car in different spots each day for the first 6-12 months. This prevents indentations from forming in a single spot due to the weight of the car. After 6-12 months, the asphalt will be fully cured—that is, fully hardened—and you can park wherever you like.- If you have a narrow driveway, try parking your car farther up or down the driveway each day.
- If you can’t avoid parking your car in one spot (for example, if you park it in a very small driveway), try parking it on large wooden planks. This will distribute your car’s weight and prevent indentations in the asphalt.
- If you park in a parking lot, choose a slightly different spot every day.
- Avoid turning your tires while your car is stationary, as this could leave impressions in the asphalt. [4] X Research source
- Try not to leave kickstands, barbeques, and other items on your asphalt for long periods of time. These tend to leave indentations. [5] X Research source
- Your contractor can give you a specific estimate for the curing time. When in doubt, err on the side of caution and assume it’ll take 12 months.
Advertisement
Section 3 of 3:
How to Protect Your New Asphalt
Download Article
-
Keep your asphalt clean. Gasoline, oil, antifreeze, or other chemical spills can corrode your asphalt, so be sure to mop these up when you see them. Remember to check your usual parking areas regularly for leaks and spills. [6] X Research source- Try to clean up any chemicals as soon as possible.
-
Fix cracks and holes as they appear. While they’re a nuisance, cracks and holes occur naturally as your asphalt settles and cures. You can prevent them from spreading by filling them in with fillers and sealers . [7] X Research source- Put a “retainer” on the edges of the asphalt to prevent it from over-expanding and cracking. A retainer can be made of gravel or a combination of soil and grass seeds.
-
Adding a sealcoat helps your asphalt last longer. Sealcoating fixes cracks and prevents chemicals, rain, and debris from penetrating the asphalt. Your contractor will give specific advice, but generally speaking, a sealcoat should first be applied at least 90 days after your asphalt is installed, once the ambient air temperature is below 80°F (26°C).- Apply another sealcoat 1 year after the asphalt is first installed, then every 2-4 years after that. [8] X Research source
Advertisement
Expert Q&A
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Tips
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
References
- ↑ https://naturesperspective.com/documents/Care%20of%20Your%20New%20Asphalt%20Driveway%202013.pdf
- ↑ https://naturesperspective.com/documents/Care%20of%20Your%20New%20Asphalt%20Driveway%202013.pdf
- ↑ https://naturesperspective.com/documents/Care%20of%20Your%20New%20Asphalt%20Driveway%202013.pdf
- ↑ https://youtu.be/9tazcIhm2w4?t=26
- ↑ https://youtu.be/9tazcIhm2w4?t=38
- ↑ https://youtu.be/9tazcIhm2w4?t=55
- ↑ https://youtu.be/9tazcIhm2w4?t=94
- ↑ https://youtu.be/htOyRzKXUuc?t=45
About This Article
Thanks to all authors for creating a page that has been read 27,375 times.
Advertisement
80%
of readers found this article helpful
.
Click a star to add your vote
% of people told us that this article helped them.
