How to Inflate a Football

PDF download Download Article
PDF download Download Article

Footballs will inevitably get flat over time, and keeping a football at the recommended pressure is essential for it to work properly. Once you notice your football is flat, it is time to inflate it using a pump with a low-pressure gauge and a long needle that is designed for use with the pump. It is not recommended that you use a standard bike pump to inflate a football.

Part 1
Part 1 of 2:

Inflating the Football

PDF download Download Article
  1. A football will tell you how much pressure to use when inflating it in one of two units of measurement: BAR or P.S.I. This number is often printed around the valve or will be included in the football’s instruction manual. If your football is worn and the number is not visible, you can use the size of the football to estimate the BAR or P.S.I.: [1]
    • Size 5: 0.8 - 1.0 BAR (11.6 - 14.5 P.S.I.)
    • Size 4: 0.7 - 0.8 BAR (10.1 - 11.6 P.S.I.)
    • Size 3: 0.5 - 0.7 BAR (7.2 - 10.1 P.S.I.)
    • 1 BAR = 14.5 P.S.I.
  2. This is necessary to do if the ball is completely flat or very deflated. Roll the ball around with your hands so it is less wrinkled and less folded.
    Advertisement
  3. The bladder is an inner tube that you do not want to puncture when inserting the long needle into the valve (the black circle with a hole in the center). If you hold the football up, shake it around, and tap it, you will be able to move the bladder away from the valve. [2]
  4. By doing so, the bladder will hang directly underneath the valve, reducing the risk of damage.
  5. Place 1-2 drops of lubricant directly on the needle, and spread it with your finger so the entire needle is lubricated. You can use specially designed valve products, normally either silicone or glycerin sprays. If you do not have valve lubricant, dip the needle in water. [3]
  6. There will be an attachment on your air pump’s hose where the needle attaches. Insert the needle into this area of the pump. Where the needle attaches may vary according to the make and model of your pump. [4]
  7. It should slide in with little resistance, but you may have to exert some force to get it in. Once the needle is entirely in the valve, you can turn the air pump on to begin inflating the football.
  8. Use the air pump until the gauge on the pump shows the necessary BAR or P.S.I. For example, if your football should be at 0.5 - 0.7 BAR (7.2 - 10.1 P.S.I.), keep the pump on until the gauge is between those numbers. [5]
    • The gauge will have a needle that shows what BAR or P.S.I. it is currently at.
    • Do not over-inflate the ball by going over the recommended BAR or P.S.I.
  9. Once the desired pressure has been reached, you can turn off the air pump and remove the needle. Pulling the needle out quickly will prevent any air from escaping.
    10. Advertisement
Part 2
Part 2 of 2:

Keeping Your Football in Good Condition

PDF download Download Article
  1. Each time you use your football, check the BAR or P.S.I. Keeping the football at its optimal pressure is essential to keep your football in peak condition.
  2. Throwing the football at a wall or asphalt will damage it, and a broken football is difficult to restore. Kick, throw, and catch the football, but never throw it at hard surfaces such as concrete or asphalt. [6]
  3. Use a wet cloth or towel to remove mud or dirt from the football. Avoid using abrasive cleaners, as this can damage the stitching and outer layer of the ball. [7]
  4. Moisture on the football and excessive exposure to heat will lead to cracking and shrinkage on the surface of the ball. Between uses, store the football somewhere cool and dry. [8]
    5. Advertisement

Community Q&A

Search
Add New Question
  • Question
    What should I do when the valve doesn't line up with the hole in the pigskin?
    Community Answer
    I'm afraid it's time to buy a new football.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 9 Helpful 17
  • Question
    How do I moisten the pin?
    Donagan
    Top Answerer
    Just stick the tip into your mouth.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 5 Helpful 10
  • Question
    Do I have to remove whole valve?
    Donagan
    Top Answerer
    Do not remove the valve. You will ruin the ball.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 2 Helpful 5
See more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Warnings

      • Do not inflate your football too much, as this can stretch the ball and possibly cause the seams to burst.
        Thanks
        Helpful 0 Not Helpful 0
      Advertisement

      Tips

      • An inflated football is easier to use than a football that is not fully inflated. Depending on how often you use your football, you may need to inflate it more often.
        Thanks
        Helpful 3 Not Helpful 2
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Things You'll Need

      • Football
      • Pump with a low-pressure gauge
      • Long needle designed to work with the pump

      You Might Also Like

      How to
      Throw a Football
      How to
      Catch a Football
      How to
      Fit a Mouth Guard
      American Football: How to Play for Beginners
      How to
      Be Eligible to Get Into the NFL
      150+ Good Vibes Instagram Captions to Inspire Others
      How to
      Kick a Football
      How to
      Read Football Odds & Probability
      How to
      Play Rugby
      How to
      Stretch Football Boots
      How to
      Throw a Football Farther
      How to
      Read the Defense As a Quarterback
      How to
      Become an NFL Scout
      How to
      Rugby Tackle
      Advertisement

      References

      1. ↑ https://www.youtube.com/watch?v=n-EvmRLQZKo
      2. ↑ https://www.youtube.com/watch?v=ZPJEq6mo4EQ
      3. ↑ https://www.youtube.com/watch?v=ZPJEq6mo4EQ
      4. ↑ https://www.youtube.com/watch?v=ZPJEq6mo4EQ
      5. ↑ https://www.youtube.com/watch?v=ZPJEq6mo4EQ
      6. ↑ https://www.sportsballshop.co.uk/acatalog/Caring-For-Your-Football.html
      7. ↑ https://www.sportsballshop.co.uk/acatalog/Caring-For-Your-Football.html
      8. ↑ https://www.sportsballshop.co.uk/acatalog/Caring-For-Your-Football.html

      About This Article

      Thanks to all authors for creating a page that has been read 116,538 times.

      Did this article help you?

      Advertisement