Download Article
From furring strips to spacers, we’ve got you covered
Download Article
Need some extra storage space in your garage, office, or kitchen? Pegboards are a slick, elegant solution! Mounting a pegboard may seem like a daunting task, but it’s actually pretty easy. The main question is whether you use furring strips to build a frame for the board, or use spacers to mount it. Worry not, we’ll cover both options! In this article, we’ll walk you through everything you need to know about installing pegboard.
Things You Should Know
- Enlist a friend to lift the pegboard and ensure its level. Then, check to make sure the screw slots line up with the holes on the peg board.
- Once you’ve lined the spacer up with the screw slot, use a drill to drive the screw and pegboard into the wall. Then, move on to the next screw slot on the top.
- Finish by driving the rest of your screws through the slots you marked, working your way around the rim of the pegboard.
Steps
-
Use a measuring tape to determine where you’ll hang your pegboard. Measure the length and height you’d like to cover and jot this measurement down. You can cut a board to size, but it’s probably easier to just buy smaller boards and hang them next to one another or buy a single board that’s close to the space you want to cover. [1] X Research source
-
Buy a pegboard based on your storage needs and preferences. Use your measurements to purchase a pegboard that matches the space. Pegboards come in a variety of different colors and styles, so choose one that you find aesthetically pleasing—especially if you’re hanging it indoors. [2] X Research source
- Metal pegboards are heavier, but they’re more durable than the typical wood or plastic.
- Wood and plastic boards are lighter and they tend to have a warmer feel if you’re installing the board indoors.
- You can always paint a pegboard if you don’t like the way it looks, so don’t worry a ton about the color if you have a specific look in mind and you’re feeling crafty.
Advertisement -
Cut your pegboard to size with a circular saw (optional). If you do want to cut a pegboard to size, flip it upside down on top of two sawhorses. Put on eye protection and gloves, and use a straight edge to mark your cut. Turn a circular saw on and gently guide it through the line you drew to cut it to size. [3] X Research source
- You can use a jigsaw instead of a circular saw if you prefer.
- If you have an especially thin wood or plastic pegboard, you can use a sharp utility knife to score the board and then snap it off by hand.
Advertisement
-
Purchase furring strips that match the dimensions of your pegboard. If your pegboard didn’t come with spacers or you want to hang especially heavy items on your pegboard, purchase furring strips. These are 1 by 2 in (2.5 by 5.1 cm) wood boards you can buy at any home improvement store. [4] X Research source
- You are going to screw the furring strips into the wall and then hang the pegboard on the furring strips. This will provide additional support and ensure there’s a gap between the board and the wall for your hooks to slide through.
- You can cut furring strips to size with a handsaw, jigsaw, or circular saw.
- The number of furring strips you need depends on the size of the pegboard. For a board that’s roughly 3 by 3 feet (0.91 by 0.91 m) or so, create a square-shaped frame for the edges of your board.
-
Use a stud finder to identify and mark the studs you’re going to use. On the wall where you’re going to hang the pegboard, run a stud finder along the wall. Use a pencil to mark every stud that along the horizontal length of the wall that the pegboard will cover. [5] X Research source
- Studs are typically spaced out every 12 inches (30 cm) or 16 inches (41 cm).
-
Drill your furring strips into the wall using 3 in (7.6 cm) wood screws. Once you have the studs marked, hold your first furring strip up on the wall where the top horizontal edge of the pegboard will go. Use a spirit level to make sure the strip is straight and drill it into the studs with 3 inches (7.6 cm) wood screws. Repeat this process for the rest of your furring strips. [6] X Research source
- Only hang vertical furring strips on studs.
- You can install as many furring strips as you’d like. You typically don’t need more than two (top and bottom edge) for smaller pegboards. For larger pegboards, you might place one furring strip every 1 ft (0.30 m) or so.
-
Hang your board over the strips and mark the screws you’re going to use. Have a friend help you lift the board up on to the furring strips. Use a spirit level to make sure it’s even on top of your furring strips. Then, use a pencil to outline the screw slots you plan on using on your furring strips. You can use any number of screws you like, but aim to place one screw every 8–16 inches (20–41 cm) or so. [7] X Research source
- If there are instructions that came with your pegboard regarding how far apart your screws should be, follow those instead.
- Mark screw slots on every single furring strip you mounted.
Advertisement
-
Purchase spacers for your screws if they didn’t come with the board. Most pegboards come with spacers to maintain a gap between the wall and the peg board—which is essential since the hooks you use to hang things stick out behind the board. If your pegboard didn’t come with spacers, swing by a home improvement store and purchase spacers. [8] X Research source
- There are spacers designed specifically for pegboard that make this process easy. [9] X Research source You can pick them at any home improvement store.
- If possible, buy adhesive spacers. This way, you can install the spacers over the screw slots you marked ahead of time so you don’t need to fiddle around in the small space between the wall and the pegboard. [10] X Research source
-
Attach the spacers ahead of time if they’re adhesive. If you have adhesive spacers, simply peel the backing off and press them over each circle you’ve outlined on your wall (or over each wall anchor where applicable). Don’t worry about the spacers not being hyper secure. The tension from the board and the screws will keep the spacers in place. [11] X Research source
- If you don’t have adhesive spacers, you’ll need to have a friend hold the board up while you slide the spacer in between the pegboard and the wall so that it lines up with the slot. Then, drive the screw through the gap in the pegboard and the spacer.
-
Mark the slots for your screws by holding the pegboard against the wall. Have a friend help you with this one. Lift the board up together against the wall where you want to hang it. Use a spirit level to make sure that the edges are all straight on the wall. Once everything is even, use a pencil to draw a circle inside of each screw slot where you’d like to drive a support screw. [12] X Research source
- If the pegboard came with spacers, there should be instructions on where you need to install support screws.
- If there are no instructions, mark one circle every 8–16 inches (20–41 cm) around the edges of the board.
-
Install wall anchors anywhere where you aren’t drilling into a stud. Unless you’re hanging super heavy power tools, you don’t actually need to hang the board on studs so long as you use wall anchors. Use a stud finder to identify if your screw slots line up with the studs. If they do, skip the anchor. For screw slots that are in hollow drywall, drill a pilot hole and screw a drywall anchor in the wall. [13] X Research source
- Do not use toggle bolts. The pegboard is likely going to tear the drywall out if you use toggle bolts. [14]
X
Expert Source
Patrick Johns
Home Improvement Specialist Expert Interview. 26 October 2021.
- Do not use toggle bolts. The pegboard is likely going to tear the drywall out if you use toggle bolts. [14]
X
Expert Source
Patrick Johns
Advertisement
-
Enlist a friend to lift the pegboard up and make sure it’s level. This requires at least one other person, but two would make it even easier. Check to make sure that the screw slots line up perfectly with the holes on the peg board where you’re going to install the screws. [15] X Research source
- Use a spirit level to ensure that your board is horizontally and vertically straight. This is especially important if you’re using furring strips.
-
Hang your top row of screws first with the spacers in between. If you don’t have adhesive spacers, slide your spacer behind the wall and the pegboard. Once you’ve lined the spacer up with the screw slot, use a drill to drive the screw the pegboard and into the wall. Do not tighten it all the way. Once you’re done, move on to the next screw slot on the top. [16] X Research source
- Continue this way until you’ve installed every screw along the top row of the peg board.
- Starting at the top makes it a lot easier for the person holding the pegboard to keep it still.
-
Finish by driving the rest of your screws through the slots you marked. Repeat this process for each screw that you’re going to install. Work your way around the rim of the pegboard. If you have screws you’re driving through the center, do those last. Once you’ve drilled each screw into the wall, tighten them to finish adhering the pegboard to the wall. [17] X Research source
- If you’re using furring strips, you just need your screws to line up with the strips to mount a pegboard.
Advertisement
-
Paint or decorate the board once you’ve mounted the pegboard. You can do this before or after you hang the pegboard. If you want to paint the board, pick up a glossy, interior satin paint. Use a foam roller to evenly distribute the paint over the board. Give it at least 24 hours to air dry and apply multiple coats if necessary. [18] X Research source
- Alternatively, you can put stickers or hand-drawn designs on the pegboard directly.
- Lay out a drop cloth if you’re painting it on the wall and use a wood skewer or toothpick to remove any drips that develop around the holes.
- If you’re hanging the board in the kitchen, paint both sides before you hang the pegboard.
-
Use a variety of hooks and hangers to keep the board visually interesting. Pegboards have universal hole sizes—they’re either 9 ⁄ 32 inch (0.71 cm) or 3 ⁄ 16 inch (0.48 cm). Since there are only two sizes, you can pick up unique and interesting hooks or hangers for your pegboard. Adding some variation to your pegboard will allow you to hang a different kinds of materials, but it will also look a lot more interesting! [19] X Research source
- There are even shelving units you can buy to put things like plants, pots, or other items you can’t hang on your pegboard.
-
Hang your tools, utensils, or items from the hooks and hangers. Once your pegboard is up on the wall, insert your hooks or hangers by sliding them into the holes on the pegboard at an angle. Then, hang your items in a way that makes your materials easy to find and intuitive. [20] X Research source
- In the garage, use your pegboard to hang your hand tools, tape, gardening items, or cleaning supplies. People rarely use pegboards to hang heavy power tools.
- In the kitchen, you can hang pots, pans, spatulas, and whisks from your pegboard. Be careful with super heavy items, like cast iron skillets, though!
- In an office space or studio, you can use your pegboard to hang desk organizers, plants, incense holders, and other office supplies.
Advertisement
Community Q&A
Search
-
QuestionHow much space should you have behind a pegboard?This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.wikiHow Staff EditorStaff AnswerYour pegboard should have about ½ inch (1.27 cm) of space behind it so that you can install hooks. If you get a ready-made pegboard with a frame, that space should be built in. Otherwise, you’ll need to create that space by building a frame or adding screw-in standoffs with spacers.
-
QuestionCan you hang a pegboard with command strips?This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.wikiHow Staff EditorStaff AnswerYou can, as long as the pegboard is small and you don’t plan to hang anything too heavy on it. Make sure the strips you choose are rated for the weight of the pegboard and anything you plan to put on it.
-
QuestionHow do you install pegboard in a metal shed?This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.wikiHow Staff EditorStaff AnswerMost metal sheds have thin walls. You may be able to drive heavy-duty deck screws through the walls to mount the pegboard. Put a small amount of roof and gutter silicone around the drill holes/washers to seal up any gaps and prevent moisture from getting into your shed.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Video
Tips
Submit a Tip
All tip submissions are carefully reviewed before being published
Thanks for submitting a tip for review!
Things You'll Need
- Measuring tape
- Pegboard
- Furring strips or spacers
- Stud finder
- 3 ⁄ 8 –3 in (0.95–7.62 cm) wood screws
- Plastic wall anchors (optional)
- Spirit level
- Power drill
- Screwdriver
- Paint (optional)
- Hangers and hooks
References
- ↑ https://youtu.be/KxsCizVyemY?t=159
- ↑ https://rack-it.com.au/wp-content/uploads/2020/09/RACK-IT-1000-Peg-Board-01921_INSTRUCTIONS_WEB.pdf
- ↑ https://youtu.be/SlKJz48tcgs?t=6
- ↑ https://static1.squarespace.com/static/621693e800e5e65d7423255f/t/629e5b2d1ee915156a369f84/1654545198319/DB-4Kit-Instruction-Sheet.pdf
- ↑ https://blog.mykukun.com/installing-pegboard-walls/
- ↑ https://blog.mykukun.com/installing-pegboard-walls/
- ↑ https://rack-it.com.au/wp-content/uploads/2020/09/RACK-IT-1000-Peg-Board-01921_INSTRUCTIONS_WEB.pdf
- ↑ https://www.chicagotribune.com/news/ct-xpm-1991-12-06-9104200087-story.html
- ↑ https://youtu.be/2IZtBIojosc?t=31
- ↑ https://diamondlifegear.com/pdfs/pegboard_x2/Installation-Instructions-HPB.pdf
- ↑ https://diamondlifegear.com/pdfs/pegboard_x2/Installation-Instructions-HPB.pdf
- ↑ https://static1.squarespace.com/static/621693e800e5e65d7423255f/t/629e5b2d1ee915156a369f84/1654545198319/DB-4Kit-Instruction-Sheet.pdf
- ↑ https://static1.squarespace.com/static/621693e800e5e65d7423255f/t/629e5b2d1ee915156a369f84/1654545198319/DB-4Kit-Instruction-Sheet.pdf
- ↑ Patrick Johns. Home Improvement Specialist. Expert Interview. 26 October 2021.
- ↑ https://www.uline.com/PDF/IH-2683.PDF
- ↑ https://www.uline.com/PDF/IH-2683.PDF
- ↑ https://www.chicagotribune.com/news/ct-xpm-1991-12-06-9104200087-story.html
- ↑ https://www.thekitchn.com/5-things-to-know-about-painting-pegboards-for-the-kitchen-242119
- ↑ https://rack-it.com.au/wp-content/uploads/2020/09/RACK-IT-1000-Peg-Board-01921_INSTRUCTIONS_WEB.pdf
- ↑ https://youtu.be/ZLwOGZGy-B0?t=109
About This Article
Article Summary
X
Before trying to install pegboard, measure the area on the wall where you plan to install it. If you want the pegboard to fit the area exactly, buy a larger size and ask the hardware store to cut it to your measurements. Alternatively, buy smaller pegboards to install like tiles. Next, install furring strips horizontally on your wall to keep space between the pegboard and the wall to prevent wall damage. To install the pegboard, lift it into place, have someone hold it, and screw it to the furring strips. For tips on how to paint your pegboard and what to do with an organizer kit, read on!
Did this summary help you?
Thanks to all authors for creating a page that has been read 309,351 times.
Reader Success Stories
- "I wanted to add additional pegboard to our garage to organize outdoor extension chords, hoses, tools, etc. This site was extremely helpful as I wanted just a quick point by point instructions with a few pictures, not a long video with music, background on why the host decided to hang pegboard, etc. Your instructions helped me complete my project quickly. Thank you!" ..." more
Advertisement
100%
of readers found this article helpful
.
Click a star to add your vote
% of people told us that this article helped them.
"I wanted to add additional pegboard to our garage to organize outdoor extension chords, hoses, tools, etc. This site was extremely helpful as I wanted just a quick point by point instructions with a few pictures, not a long video with music, background on why the host decided to hang pegboard, etc. Your instructions helped me complete my project quickly. Thank you!"
..."
more
"I wasn't sure about how I was going to attach the pegboard to my interior wall. This has been very helpful in explaining what I will need to complete the install."
..."
more
"This guide was most helpful and I used this tutorial as a guide to assist me with hanging my pegboard. Thank you for this very useful article."
..."
more
"Quickly determined what length screws needed to mount the board on 1/2" wall-mounted wood strips. Thanks."
"I was nervous about hanging pegboard. This article explained it clearly and gave me the push to hang it."
