How to Install Windows XP (With Pictures)

PDF download Download Article
Everything you need to know to get Windows XP up and running on your PC
PDF download Download Article

Want to run some software that was only available on Windows XP? While Windows XP has not been supported by Microsoft for over a decade, you can still install it on your computer or virtual machine if you have a Windows XP installation disc or ISO image and a valid product key. Just keep in mind that because Windows XP is so old, it won't be compatible with most modern hardware. This guide will teach you how to install Windows XP on your computer, with expert advice from Computer Repair Specialist Matt Ham.

Quick Steps

  1. Get a Windows XP CD, DVD, or ISO image and product key.
  2. Set your PC to boot from removable media.
  3. Boot from the Windows XP media and press Enter .
  4. Create a partition and format it as NTFS.
  5. Enter your product key when prompted.
  6. Complete the setup process.
  7. Activate your Windows XP product key.

For popular FAQs on installing Windows XP, jump to more common questions .

Part 1
Part 1 of 3:

Getting Ready

PDF download Download Article
  1. First, it's important to remember that Windows XP is extremely old and vulnerable to viruses and malware. Computer repair specialist Matt Ham doesn't recommend installing it on your computer. If you have an older PC that doesn't support Windows 10 or 11, consider Windows 7 instead, and running any XP-specific software in compatibility mode. But if you want to experiment or install XP on a virtual machine, read on.
    • If you built the PC yourself and used much older hardware that was compatible with Windows XP, or you're installing on a virtual machine, you'll be fine as long as the minimum requirements are met or exceeded:
      • 233 MHz Intel or AMD CPU
      • 64 MB of RAM
      • 1.5 GB of available drive space
      • Super VGA (800 x 600) or higher display adapter
    • However, things get tricky if you want to install Windows XP on a modern computer. While any modern PC has more than enough power to run Windows XP, finding drivers for your hardware, including SATA hard drives, will be tough. Sometimes, the built-in drivers will be enough to support the most crucial hardware, but you'll probably run into problems with sound cards and network interfaces.
  2. If you don't have a Windows XP installation CD or DVD, you'll need an ISO image. You can then use the ISO image to install Windows XP on a virtual machine or create a bootable installation disc . The safest place to download a Windows XP ISO image is from Archive.org, but you'll still want to use your more modern OS's antivirus tools to make sure these files don't have a malware infection:
    Advertisement
  3. If you have the original software and its 25-digit product key, you're good to go. Or, if you have an old computer that had Windows XP installed, you can usually find the product key sticker somewhere on the hardware. You may be able to find product keys online, but it might be tough to activate them, as phone activation for Windows XP is no longer supported.
    • Some users on the Microsoft Answers forum have had success activating Windows XP by calling their local activation number found in this Microsoft tool . [1]
  4. If you're installing Windows XP on a PC using a CD or DVD, you'll need to set your computer to boot from the optical drive instead of from the hard drive. This will allow you to load the Windows XP setup files before your computer boots to its installed operating system. You can change the boot order in the BOOT menu in your BIOS .
    • To enter the BIOS of your computer, you usually press the setup key (which might be F9 or DEL) when your computer starts or notifies you that you can enter "setup".
    • In the BOOT menu, set the order so that your CD/DVD-ROM drive is set as the first boot device.
    • If you are installing Windows XP from a USB drive , make sure that the USB drive is set as the first boot device. You may need to have the USB drive inserted for it to appear as an option.
    5. Advertisement
Part 2
Part 2 of 3:

Installing Windows XP

PDF download Download Article
  1. Once the boot order is set, Ham says you'll need to insert the Windows XP installation media. Save and Exit from the BIOS, which will then reboot your computer from the installation media. You will be presented with the message: Press any key to boot from CD . Press any key on your keyboard to start the Setup program.
    • Setup will load files necessary to begin the installation, which may take a few moments. Once the loading is complete, you will be taken to the Welcome screen.
    • If you're using a virtual machine like VirtualBox or VMware , create a new virtual machine for your XP installation and boot from the ISO image. [2]
  2. Once the loading is complete, you will be taken to the Welcome screen. You are given several options, but if you are installing or reinstalling Windows XP, you’ll want to press Enter to start the installation configuration.
  3. This document tells you what you can and can’t do with Windows and your rights as the consumer.
  4. You will see a list of available partitions on your installed hard drives. If you are installing Windows XP on a new hard drive, you should see only one entry labeled "Unpartitioned space." If you have a previous version of Windows or Linux installed on your computer, you will potentially have multiple partitions. Ham notes that if you want to completely wipe the machine before installing, you can delete any existing partitions.
    • Installing Windows XP will erase all the data on the partition you choose. Select an empty partition or one containing data you do not care about losing.
    • To delete a partition, select it and press D . This will return them to “Unpartitioned space”. Any data on the partition will be lost when it is deleted.
  5. Select the Unpartitioned space and press C . This will open a new screen where you can set the partition’s size from the available space. Enter the size in megabytes (MB) for the new partition, then press Enter .
    • By default, the partition will be set to the maximum amount of available space. Unless you plan on creating multiple partitions, you can usually leave this at its default.
    • Windows XP requires at least 1.5 gigabytes (1536 MB) for its installation files, but you will want more than this for programs, documents, downloads, and other files. 5 GB (5120 MB) is a good baseline amount for Windows XP, with more if you plan on installing a lot of programs.
    • You can create multiple partitions on a single drive. This can allow you to separate your programs from your movies and music, or to install another operating system. Windows XP can only be installed on one discrete partition.
  6. Select your new partition and press Enter , then select "Format the Partition using the NTFS File System" and press Enter . NTFS is the preferred file system type, supporting more disk space per partition than FAT and including security features at the file system level and system-level compression. There are almost no situations anymore where choosing FAT would be preferable.
    • If your partition size is larger than 32 GB, you will not be given the option to choose FAT.
    • It is highly recommended to avoid Quick Format, as this skips an important process that checks the hard drive for errors or bad sectors. This scan consumes most of the time taken when performing a full format. If there are errors on a disk at the physical level, it's best to catch them now rather than later.
    • The system will now format the partition. The time this process requires depends on the speed and size of the drive. The larger the partition, the longer the process will take.
  7. Wait for the Setup files to copy from the installation disc, then press Enter and allow your computer to boot normally.
    • You will see the message asking you to press a key to boot from CD. Ignore it and allow the computer to continue booting from the hard drive. You will see the Windows logo as the Setup program loads.
    • After the Windows logo disappears, you will see a list of remaining steps on the left side of the screen and tips for using Windows on the right. The time remaining for the installation will be displayed below the list of remaining steps.
    • It is normal for the screen to flicker, turn on and off, or resize during this process.
  8. During installation, a dialog window will appear, asking you to choose your Regional settings. Select appropriate settings native to your area.
    • Enter your full name if you want. This will be set as the “owner” of Windows, and will be attached to certain things, such as Document creation.
  9. You cannot complete the installation process without a valid product key. Enter the key, then click Next to continue.
    • Some versions of Windows will not ask for the Product Key until installation is complete.
  10. This will be the name that represents the computer on a network. Windows sets a default name, but you can change it if you would like. You can also set a password for the Administrator account. This is optional but recommended for public computers.
  11. Ensure that the date/time are correct. Click "Next" to continue.
  12. Almost all users installing Windows XP on a home computer can leave "Typical Settings" selected for network setup. If you are installing Windows XP in a corporate or academic environment, check with the system administrator, though Typical Settings will most likely work.
    • In the next window, nearly all users can select “No, this computer is not on a network, or is on a network without a domain.” If you are in a corporate setting, ask your system administrator which you should choose.
    • You can typically leave the workgroup name set to default.
    13. Advertisement
Part 3
Part 3 of 3:

Setting Up Windows XP

PDF download Download Article
  1. This will only take a few minutes, and the computer will reboot after installing. Once the computer reboots, you will be taken to the Windows XP desktop. At this point, installation is complete, though there are a few things left to do before Windows is completely usable.
  2. Once Windows loads, you will be told that Windows will automatically configure your display. Click OK to start the configuration. Your screen will flash a couple of times, and then you will be asked if you can read the box that appears.
  3. If your computer is connected to the internet , select your connection type, and click Next to continue.
    • Microsoft does not recommend connecting a computer running Windows XP to the internet. [3] If you plan to do so, be sure to put the computer behind a firewall .
  4. If connected to the internet, select Activate Now to activate your product key. If you haven’t entered your Product Key yet, you will need to enter it now.
    • If you choose telephone activation instead, you can try the phone number you're provided, but many users have noticed the agents can no longer help with Windows XP activation. If you're stuck activating, visit this Microsoft support document about activating older versions of Microsoft Office to get the latest number—you should be able to call the number provided and receive an activation link via email.
    • Be sure to activate Windows within 30 days of installation. Otherwise, the system will not allow you to log on until activation is complete.
  5. After activating, you'll be prompted to create users for the system and then taken to the default Windows XP Desktop. Congratulations! There are a few things that you should probably do now that you have Windows up and running:
    6. Advertisement

Community Q&A

Search
Add New Question
  • Question
    How do I install Windows on a drive other than C:?
    Community Answer
    On the Choose Drive option, you should see your other drives. You can format them or erase their partitions so you can install Windows to those.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 6 Helpful 16
  • Question
    Can I install Windows XP without being connected to the internet?
    Tjbotha41
    Community Answer
    Yes, you can, if you have the install disk or a bootable flash drive for Windows XP.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 3 Helpful 18
  • Question
    Can we do Windows 7 and Windows XP in a single computer and have a common hard disk?
    Community Answer
    You can. Just identify which partition has Windows 7, and don't install XP on it.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 9 Helpful 18
See more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Tips

      • The Windows XP installation generally takes 15 to 40 minutes, depending on your system's speed. It's best to stay near because you'll be asked to answer questions throughout the installation.
        Thanks
        Helpful 0 Not Helpful 0
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      • Connecting Windows XP to the internet, even if you don't browse the web, can be dangerous. Hackers are constantly scanning networks for vulnerable systems to exploit, and your Windows XP system can become infected by viruses and malware in minutes. [4]
        Thanks
        Helpful 0 Not Helpful 0
      • Some users installing Windows XP from disks with Service Pack 2 or below experience issues during the early stages of installation on modern computers, characterized as never-ending reboot loops or a Blue Screen Error (BSOD). This is due to some disks lacking a driver for SATA hard drives. To fix this, the user will have to slipstream the drivers to a copy of the install CD, or put the required drivers on a floppy disk and manually add them to the install list.
        Thanks
        Helpful 0 Not Helpful 0
      Advertisement

      You Might Also Like

      How to
      Speed up a Windows XP Computer
      How to
      Move from Windows to Linux
      How to
      Activate Windows XP in 2024
      How to
      Activate Windows XP Without a Genuine Product Key
      How to
      Make Windows XP Genuine Forever
      How to
      Set Up a Wireless Internet Connection in Windows XP
      3 Ways to Access Windows XP with a Blank Administrator Password
      How to
      Change the Language of Your Computer (Windows XP)
      How to
      Create or Download a Bootable Windows XP ISO
      How to
      Install Windows XP Mode in Windows 7
      How to
      Enable Automatic Logon in Windows XP
      How to
      Back Up Windows XP
      Share Your Internet Connection on Windows XP
      How to
      Retrieve Passwords in Windows XP
      Advertisement

      References

      1. ↑ https://answers.microsoft.com/en-us/windows/forum/all/how-to-activate-windows-xp-guide/7eb00ad4-1d2a-4ab3-b52a-1f4e7e9129af?LastReply=true#LastReply
      2. ↑ https://www.youtube.com/watch?v=XkvR70y63R4
      3. ↑ https://support.microsoft.com/en-us/windows/windows-xp-support-has-ended-47b944b8-f4d3-82f2-9acc-21c79ee6ef5e
      4. ↑ https://www.xda-developers.com/connected-windows-xp-internet-didnt-survive-long/

      About This Article

      Article Summary X

      To install Windows XP on a Windows computer, you'll need a Windows XP installation CD. Insert the CD, then set your computer to boot from the CD drive by opening the BIOS and changing the boot order to place the CD drive at the top of the list. Once you restart your computer, it will open to the Windows XP installation menu; fill out each form and follow any on-screen prompts to install XP.

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 1,233,982 times.

      Reader Success Stories

      • Cedric Izquierdo

        May 11, 2016

        "Very helpful! I was able to install Windows XP Pro with SP3 on my Pavilion 23."
      More reader stories Hide reader stories
      Share your story

      Is this article up to date?

      Advertisement