PDF download Download Article PDF download Download Article

Looking to install a new banister railing in your home? A banister not only provides additional safety on your staircase, it also adds visual appeal to your living space. With the use of some wood and a few tools and supplies, you will be able to install a banister. We've put together a simple, easy-to-follow guide to help you get started.

1

Purchase a banister.

PDF download Download Article
  1. They're also available on the Internet.
  2. Advertisement
2

Determine the correct height for the banister.

PDF download Download Article
  1. Stand a level vertically to ensure the accuracy of your markings. Then, connect the markings with a chalk line.
    • Contact your local building department for the codes that govern the installation of banisters.
3

Locate the studs in the walls.

PDF download Download Article
  1. Mark the location of each stud on the wall. [1]
  2. Advertisement
4

Cut a piece of wood that fits the bottom of the banister.

PDF download Download Article
5

Screw the mounting strip onto the wall.

PDF download Download Article
  1. [2]
  2. Advertisement
6

Apply painter's tape.

PDF download Download Article
7

Stain the mounting strip.

PDF download Download Article
  1. Be sure to apply 2 coats of stain.
  2. Advertisement
8

Remove the painter's tape.

PDF download Download Article
9

Cut the banister to fit the staircase.

PDF download Download Article
  1. Use a power saw to cut the banister. Then, miter the ends of the banister.
    • Use a miter box to do so and follow the instructions that apply to the brand that you choose.
  2. Advertisement
10

Apply the banister to the mounting strip.

PDF download Download Article
  1. These should not coincide with the holes that you drilled for the mounting strip. Then, screw the banister into place.
11

Miter a cap for each end of the banister.

PDF download Download Article
  1. Follow the instructions that apply to the brand that you choose. Be sure that the caps fit the ends of the handrails properly, glue them into place, and then screw them into place so they remain sturdy. [3]
  2. Advertisement
12

Install pre-cut wooden pegs into the holes on the banister.

PDF download Download Article
  1. If you don't have any, shop for some at your local hardware or home improvement store. Make sure that they match the color of the banister, and then gently use a hammer to secure the pegs in. [4]

Expert Q&A

Ask a Question
      Advertisement

      Video

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Thanks for submitting a tip for review!
      Advertisement

      Things You'll Need

      • Banister
      • Chalk
      • Power saw
      • Miter box or table saw
      • Stud finder
      • Wood
      • Screws
      • Screwdriver
      • Painter's tape
      • Wood stain
      • Wood glue
      • Wooden pegs
      • Hammer

      Expert Interview

      Thanks for reading our article! If you’d like to learn more about home renovation, check out our in-depth interview with Agustin Renoj .

      About This Article

      Thanks to all authors for creating a page that has been read 64,190 times.

      Did this article help you?

      Advertisement