Installing a Shower Pan: Everything You Need to Know

PDF download Download Article
PDF download Download Article

Shower pans are used as the base of a shower stall and collect water while you are taking a shower. Most shower pans are acrylic or fiberglass and can be installed by following a few basic instructions and using the correct tools for the job. Shower pans will vary some from manufacturer to manufacturer, and you can also build your own , but the basic installation steps are the same. See Step 1 for more information.

Part 1
Part 1 of 2:

Getting Started

PDF download Download Article
  1. Installing a shower pan requires basic home repair tools and some specialty items available at most home retailers. To do the job properly, you'll need: [1]
    • Tape measure
    • Carpenter's level
    • Phillips and flathead screwdrivers
    • Power Drill
    • Drill Bits
    • Hammer
    • Caulking gun
    • Adjustable pliers (if needed)
    • Framing square
    • Silicone bath caulk
    • New shower pan
    • 1 ½ or 2-in. screws
    • Washers
    • Wooden shims
    • Masking tape
  2. Measure along all of the walls that will come in contact with the pan. Write these measurements down and take them with you when purchasing the pan. Your home center professional will help you select the correct size based on the measurements. [2] [3]
    • Most modern shower pans are either acrylic or fiberglass for ease of installation, but keep in mind that some shower pans may have to be special ordered if they’re not a standard model or size. Find this out before you tear out your existing shower. [4]
    • Standard sizes are 36” x 36”; 36” x 42”; 36” x 48” and are usually available in white or almond. Most dealers will have these sizes and colors in stock. Larger sizes or “decorator” designs and colors will likely have to be special-ordered. Call your dealer to see if they have your size and color in stock.
    Advertisement
  3. Clear all debris and old adhesive from the surface. Use a broom or a vacuum to clear loose debris. Use a wide-blade putty knife or a paint scraping tool to peel off old caulking and adhesive. [5]
    • Make any additional surface preparations that are recommended by the shower pan manufacturer as necessary, such as applying a fresh coat of a water seal product to the surface below where the pan will be installed. Be sure to follow the instructions on the container for drying time. Do not install the pan until the water seal is dry.
    • Make sure the subfloor is level before installing the shower pan. If it's not, use a self-leveling compound to level it.
  4. Make sure the surface area is completely and free of standing water and excessive moisture before setting the pan. A damp surface can breed mold and mildew. Additionally, when sealing with caulk, moisture can affect the adherence of the caulk and cause a defective seal. [6]
  5. The first thing you’ll need to do after preparing the shower base area is “dry-fit” your shower pan within the space. Dry fitting means that you won't use any adhesives or fasteners at this time, because you're just checking to make sure everything fits. Be sure the pan fits snugly within the space, but not too tight or the pan may buckle. If the fit is too sloppy, you are likely to have movement issues that can cause seams to separate and create serious water seepage. A fit that is too loose will require additional stabilization of the pan. [7]
    • Check to see if the drain cut-out in the pan lines up and fits properly over the drain pipe. Never force it to line up, as this can cause damage to the pan and to the drain pipe. A little movement (about a half-inch or so in each direction) of the pipe is fine, and will help when lining up the drain components.
    • Since drain components vary by manufacturer, follow the illustrations that come with your shower pan for test fitting. Once you are satisfied that everything fits properly, you are ready to complete the permanent installation.
    6. Advertisement
Part 2
Part 2 of 2:

Installing the Pan

PDF download Download Article
  1. If you removed it after dry-fitting, replace the pan as it was before. Be sure to line up the drain cut-out and drain components properly. Follow the manufacturer’s instructions on attaching drain hardware. Some drain installations may require a short coupling piece to be attached to the bottom of the drain attached to the pan, then slipped into the drain pipe in the floor, sealed with a compression gasket. Others may require a coupling extension pre-inserted into the floor’s drain pipe, then the pan slips over the coupler and is sealed with caulking and a rubber compression ring. Your particular pan kit will have more specific details.
  2. [8] With the pan sitting in place, use a carpenter’s level and wood shims to level the pan, adjusting with shims as necessary. Don't shim so high that the pan becomes elevated or is “floating” above the solid base. Only minimal shimming should be needed if the sub-surface is level to begin with.
    • Once the pan is level, mark the top of the pan lip where it meets the studs, and mark the location of the shims in case the pan has to be moved.
  3. [9] Follow the manufacturer's instructions, but in general you want to avoid driving nails or screws through the lip of the pan unless directly specified. You can temporarily secure the pan to the studs by placing a 1 ½” or 2” screw through a washer, then insert the screw just above the lip of the pan so the washer overlaps the lip to hold it securely. Do not over-tighten, as this may crack the shower pan.
    • Use your carpenter's level again to make sure your fastening didn't throw the pan off slightly. When the pan is level, stable and securely mounted, it’s time to make all components water-tight.
  4. All locations where there was any penetration of the pan (i.e. drilled or factory holes) need to be filled with silicone bath caulk to create a waterproof seal. Also seal around the studs where the pan makes contact, helping to secure the pan. [10]
    • Use a thin coat of caulk, about the thickness of a piece of masking tape, spread over each penetration location. Use just enough to coat and seal where nails or screws are used to attach the pan to the studs. Wipe up any accidental drips of caulk from the pan before they dry. If you discover them after they dry, you can usually peel them up with your fingernail or a plastic putty knife.
    • As you're working, don't let any caulk run over the lip of the pan, as doing so can affect the fit and seal of the side shower panels. If it runs over while being applied, wipe it off before it dries.
    • You'll also need to caulk the joint where the pan meets the floor. Be sure the surface is very clean and dry or you will not obtain a proper seal.
  5. [11] Recheck all drain components and seal them with caulk if recommended by the manufacturer. When you're installing any compression seals around the drain components, always use a blunt tool the push it into place. Never use a screwdriver or other sharp object, which can permanently damage the seal.
    6. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    What are shower pans made out of?
    Dave Jones
    Master Plumber, Roto-Rooter Plumbing & Water Cleanup
    Dave Jones is a Professional Plumber and the Midwest Regional Vice President at Roto-Rooter Plumbing & Water Cleanup. In 1992, Jones joined Roto-Rooter as a drain service technician at the age of 18. Since then, he has risen through the ranks into positions of increasing authority. Dave served as general manager of Roto-Rooter’s Charlotte, North Carolina, and Atlanta, Georgia branches before being promoted to Contractor Area Manager and later to Regional Vice President. Dave holds Master Plumber Licenses in Pennsylvania, North Carolina, and Georgia.
    Dave Jones
    Master Plumber, Roto-Rooter Plumbing & Water Cleanup
    Expert Answer
    They're typically fiberglass or acrylic. They can also be tile, pebble, or travertine.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 1 Helpful 4
  • Question
    What can I use instead of a shower pan?
    Dave Jones
    Master Plumber, Roto-Rooter Plumbing & Water Cleanup
    Dave Jones is a Professional Plumber and the Midwest Regional Vice President at Roto-Rooter Plumbing & Water Cleanup. In 1992, Jones joined Roto-Rooter as a drain service technician at the age of 18. Since then, he has risen through the ranks into positions of increasing authority. Dave served as general manager of Roto-Rooter’s Charlotte, North Carolina, and Atlanta, Georgia branches before being promoted to Contractor Area Manager and later to Regional Vice President. Dave holds Master Plumber Licenses in Pennsylvania, North Carolina, and Georgia.
    Dave Jones
    Master Plumber, Roto-Rooter Plumbing & Water Cleanup
    Expert Answer
    You can install a waterproof membrane before laying tile or stone down. The membranes are typically made of plastic sheets, but there are liquid and foam membranes as well.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 1 Helpful 2
  • Question
    What should I do before I order the shower pan?
    Dave Jones
    Master Plumber, Roto-Rooter Plumbing & Water Cleanup
    Dave Jones is a Professional Plumber and the Midwest Regional Vice President at Roto-Rooter Plumbing & Water Cleanup. In 1992, Jones joined Roto-Rooter as a drain service technician at the age of 18. Since then, he has risen through the ranks into positions of increasing authority. Dave served as general manager of Roto-Rooter’s Charlotte, North Carolina, and Atlanta, Georgia branches before being promoted to Contractor Area Manager and later to Regional Vice President. Dave holds Master Plumber Licenses in Pennsylvania, North Carolina, and Georgia.
    Dave Jones
    Master Plumber, Roto-Rooter Plumbing & Water Cleanup
    Expert Answer
    Measure the dimensions of the space and make sure that your shower pan is going to fit perfectly. Manufacturers typically make their pans in a few prefabricated sizes, and if your space is too big, you'll need a custom pan.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 1 Helpful 2
See more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!

      Warnings

      • This project involves some advanced plumbing knowledge and skills. Contact a professional installer or plumber if you have any concerns or questions.
        Thanks
        Helpful 2 Not Helpful 3
      Advertisement

      Things You'll Need

      • Reciprocating saw
      • Pry bar
      • 1/2-inch (1.3 cm) plywood (if needed)
      • Drill with bits
      • Shower strainer
      • Large pliers (if needed)
      • 4-foot (1.21 m) level
      • Galvanized screws
      • PVC trap
      • Plumbing primer and cement
      • Compression gasket
      • Rubber mallet


      You Might Also Like

      How to
      Fix a Shower Diverter
      How to
      Replace a Shower Valve
      How to
      Remove a Shower Head
      How to
      Change Out Single & Double Shower Knobs
      How to
      Fix a Leaky Shower Faucet by Yourself
      Tiling a Shower: Prep, Installation, and Finishing Touches
      How to
      Replace a Shower Head Like a Pro
      How to
      Install a Shower Curtain
      How to
      Hang a Shower Curtain Rod
      How to
      Remove a Shower Drain
      How to
      Unclog a Shower Drain
      How to
      Build Your Own Shower Pan, From Start to Finish
      How to
      Install a Curved Shower Rod
      What Causes a Gargling Toilet during a Shower & How to Fix It
      Advertisement

      References

      1. ↑ https://www.familyhandyman.com/bathroom/shower-installation/plumb-install-a-shower-base/
      2. ↑ https://www.youtube.com/watch?v=4ZGskNSXBSE
      3. ↑ Dave Jones. Master Plumber, Roto-Rooter Plumbing & Water Cleanup. Expert Interview. 29 March 2021.
      4. ↑ Dave Jones. Master Plumber, Roto-Rooter Plumbing & Water Cleanup. Expert Interview. 29 March 2021.
      5. ↑ https://www.familyhandyman.com/tiling/how-to-remove-caulk-easily/
      6. ↑ https://extremehowto.com/installing-a-shower-pan-liner/
      7. ↑ https://www.homeadvisor.com/r/how-to-install-shower-pan/
      8. ↑ https://www.thisoldhouse.com/bathrooms/21017243/how-to-replace-a-shower-pan
      9. ↑ https://www.thisoldhouse.com/bathrooms/21017243/how-to-replace-a-shower-pan
      1. ↑ https://www.lowes.com/n/how-to/install-a-shower-floor
      2. ↑ https://www.bobvila.com/articles/how-to-install-a-shower-pan/
      3. Videos provided by This Old House

      About This Article

      Article Summary X

      To install a shower pan, start by fitting the pan into place and leveling it with wooden shims if necessary. Then, attach the pan to the surrounding studs using screws and washers that are overlapping the lip of the pan. Next, seal the edges of the pan and any holes with silicone bath caulk. Finally, let the caulk dry completely before rechecking the drain components to make sure they're sealed. To learn how to measure for a new shower pan, read on!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 269,030 times.

      Reader Success Stories

      • Harriet

        Apr 25, 2022

        "How do you properly line up a plumbing drain and heights going through your trusses underneath the shower pan?"
      More reader stories Hide reader stories
      Share your story

      Did this article help you?

      Advertisement