PDF download Download Article PDF download Download Article

Installing a new SSD (solid state drive) in your laptop is easy, but you'll need to take some extra steps if you want to set the new drive as your primary hard drive. This wikiHow article will show you how to choose the right SSD for your laptop, mount and install it, and clone your current hard drive to install your files on the SSD.

Part 1
Part 1 of 5:

Getting Started

PDF download Download Article
  1. SDD's can come in different sizes and thicknesses. You also need to make sure the drive has the right interface for your laptop (SATA, or IDE). A 2.5-inch, 7 mm thick SATA drive is what is most commonly used in newer laptops. However, thinner laptops may use a 1.8-inch drive (if they can be upgraded at all). Some laptops use a 9.5 mm drive. Consult your laptop's user manual, or the manufacturer's website to make sure you purchase the right SSD for your laptop.
  2. This will allow you connect your SSD to your computer via USB during the cloning process. Then after the drive is installed, you can use an external enclosure to turn your old hard drive into an external hard drive.
    Advertisement
  3. EDS wrist straps prevent static discharges that can cause permanent damage to your hard drive and other computer parts. If you are not using EDS wrist straps, make sure to ground yourself by touching something metal before you begin working with the hard drives, or the inside of your laptop.
  4. If you have a lot of large folders, it may be useful to purchase an additional external hard drive to backup all your files .
  5. Advertisement
Part 2
Part 2 of 5:

Preparing Your Current Hard Drive

PDF download Download Article
  1. The SSD you are installing is most likely smaller than the hard drive you currently have installed. If your SSD doesn't have enough space to transfer all your files, backup and delete as much as needed so that you can transfer all the contents of your current drive to the SSD drive. You can backup your files using an external drive, an optical disk, a USB drive, or cloud-based storage like Dropbox , or Google Drive .
  2. This will display a list of Windows options you can click.
  3. It's about halfway down the list.
  4. This is the hard drive that has Windows and all your files installed on it. This is usually the "C:" drive.
  5. It will take a moment to read the drive and see how much space you can shrink the volume by.
  6. Make sure the total size after the shrink is smaller than the SSD drive. If you have a 250 GB SSD, the total size after the shrink will need to be smaller than 250,000 MB (500,000 for a 500 GB SSD).
  7. During the shrink process, your current drive so that it's smaller, and leave the rest of the space as unallocated.
  8. Advertisement
Part 3
Part 3 of 5:

Getting the Disk Cloning Software

PDF download Download Article
  1. Go to https://www.easeus.com/backup-software/tb-free.html in a web browser. This website allows you to download a free version of EaseUS ToDo Backup, which will allow you to clone your current disk drive to your SSD. If you purchased a data transfer kit that comes with its own cloning software, go ahead and use that.
  2. It's the large blue button in the center of the page.
  3. It's the large blue button at the top of the page.
  4. Your email address is required in order to download the software.
  5. It's the link at the top of the window.
  6. By default, all downloaded files can be found in your "Download" folder.
  7. Use the drop-down menu to select a language. "English" will be the default language.
  8. It's in the lower-right corner.
  9. This will indicate that you agree to the terms of conditions.
  10. Click the "browse" button to select a different install location, if you want the install location to be different from the default.
  11. Make sure the checkbox next to "Create a desktop icon" is checked so that you can easily find and launch the program.
  12. You can use your current drive, or select an external hard drive.
  13. You may be presented with a couple of offers before the software installs. It is recommended that you uncheck those offers and click "Next".
  14. 14
    Click Finish . One the install is complete, click "Finish".
  15. Advertisement
Part 4
Part 4 of 5:

Cloning Your Hard Drive

PDF download Download Article
  1. The external enclosure is a device that you place your SSD in. Make sure you are wearing your EDS straps before handling your SSD. If you don't have EDS straps, make sure to ground yourself by touching something metal before handling the SSD.
  2. Use a USB cord to connect the external enclosure with the SSD to your laptop. Windows should automatically detect your external SSD.
    • If Windows doesn't detect the SSD drive, press Win+X, then click "Disk Management". Right-click the SSD drive and click "Initialize disk".
  3. Before you launch your disk cloning software, close all windows and applications.
  4. If you downloaded EaseUS ToDo Backup, go ahead and click it to launch it. You may be asked to enter a license key the first time you launch it. If you are asked to enter a license key, just click "Later".
  5. It's at the top of the program, below the icon with two squares stacked on top of each other.
  6. Your source drive is the current drive you have Windows and all your files installed on.
  7. The target drive is the drive that you want to clone your current hard drive too.
  8. It's in the lower-left corner of the software window.
  9. It's the button with the check mark in the lower-right corner. This will start the cloning process. Allow a couple of hours for the process to complete.
  10. Advertisement
Part 5
Part 5 of 5:

Installing the SSD

PDF download Download Article
  1. It's in the power icon.
  2. Once your laptop is shut down, disconnect the power cord and all devices connected to the USB ports (including the SSD).
  3. If you do not have EDS wrist straps, touch something metal before handling the SSD or the insides of your laptop.
  4. It's a good idea to remove the battery before proceeding. Press and hold the power button for 5 seconds to drain any charge that is still lingering in your laptop's circuits.
  5. Use a small Philips screwdriver to remove the access panel. Normally, the access panel is on the bottom of your laptop. If you can't find it, consult the user's manual for your laptop to find the exact location.
  6. Lift the hard drive about 45 degrees and pull it out. If you're not sure where the hard drive is located, consult the user's manual for your laptop.
  7. Place the SSD in the same space you removed the old hard drive from.
  8. Put the access panel back on and screw it down, and place the battery back in its slot.
  9. Re-connect the power cord and press the power button. Your laptop should boot up the same as usual, but much faster.
  10. Advertisement



Expert Q&A

Ask a Question
      Advertisement

      Video

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Thanks for submitting a tip for review!

      About This Article

      Thanks to all authors for creating a page that has been read 123,220 times.

      Is this article up to date?

      Advertisement