How to Knit a Child's Hat

PDF download Download Article
Learn to knit a simple children's hat from scratch
PDF download Download Article

Children love being able to pick out their own yarn for a handmade hat and you can customize the size for a perfect fit. You'll only need a little yarn and some knitting experience in order to knit a classic ribbed hat. Once you work the body of the hat, steadily decrease the rows so you can close the top of the hat. Your kiddo will love their special comfy hat!

Part 1
Part 1 of 3:

Casting On

PDF download Download Article
  1. Wrap a measuring tape around the widest point of your child's head to find their head circumference. This will give you a good idea of which size hat to knit. You can also choose a hat size based on how high you want the hat to be. Follow these size recommendations to make a hat that fits your child well: [1]
    • Preemie: 10 in (25 cm) circumference and 6 inches (15 cm) high
    • Newborn: 12 in (30 cm) circumference and 7 inches (18 cm) high
    • 6-month old: 14 in (36 cm) circumference and 8 inches (20 cm) high
    • 1-year old: 16 in (41 cm) circumference and 9 inches (23 cm) high
    • Toddler: 18 in (46 cm) circumference and 9 1 ⁄ 2 inches (24 cm) high
  2. Get out a skein of DK weight yarn in any color and pull about 10 inches (25 cm) of yarn from 1 end. Keep in mind that you'll only need about 1/2 to 2 ounces (40 to 160 yards) of the yarn so this is a great project for using up yarn from your stash. [2]
    • DK weight yarn is also referred to as light worsted (#3) yarn.
    Advertisement
  3. Twist the end of the yarn into a loop so it crosses over itself with the tail end of the yarn on top. Hold the yarn tail end with 1 hand. Then, slide the index and thumb of your other hand under and through the loop. Use these fingers to pinch the working yarn and pull it through the loop. [3]
    • If you continue to pull, you'll make the knot with a small loop at the end. If you kept pulling this, the knot would unravel or slip away.
  4. Once you've made the slip knot, put it onto 1 of your circular needles and pull the yarn tail until the stitch is secure. If you don't want to use circular needles, put the slip knot on double-pointed needles of the same size. Then, cast on: [4]
    • 60 stitches for a preemie size
    • 72 stitches for a newborn size
    • 84 stitches for a 6-month old size
    • 96 stitches for a 1-year old size
    • 108 stitches for a toddler size

    Tip: Use circular needles that are 16 inches (41 cm) in length so you have room to work the hat. When you begin to decrease the crown of the hat, you'll need to switch to size 6 US (4 mm) double-pointed needles.

    5. Advertisement
Part 2
Part 2 of 3:

Knitting the Body

PDF download Download Article
  1. Put a small, circular stitch marker on your right (working) needle once you finish casting the stitches on. This will help you keep track of when you finish working a row. To join the round, knit a stitch to connect the first and last stitches that you cast on. [5]
    • If you prefer to knit the entire hat on double-pointed needles instead of starting with circular needles, divide the stitches between the double-pointed needles using multiples of 12 on each.
  2. Since you'll be working a ribbed pattern for the body of the hat, make 2 purl stitches after joining the round. You'll continue to alternate 2 knit stitches with 2 purl stitches for the rest of the hat's body. [6]

    Variation: To make the ribbing narrower, just purl 1 stitch. Then, make the body by working knit 1, purl 1 instead of knit 2, purl 2.

  3. Repeat this ribbed pattern across the entire first row. When you reach your stitch marker, continue to knit 2, purl 2. Keep working the ribbed body until it measures: [7]
    • 4 3 ⁄ 4 inches (12 cm) high for a preemie size
    • 5 3 ⁄ 4 inches (15 cm) high for a newborn size
    • 6 3 ⁄ 4 inches (17 cm) high for a 6-month old size
    • 7 3 ⁄ 4 inches (20 cm) high for a 1-year old size
    • 8 1 ⁄ 4 inches (21 cm) high for a toddler size
    4. Advertisement
Part 3
Part 3 of 3:

Decreasing the Crown

PDF download Download Article
  1. To do the first decreasing round, slip 2 stitches onto the working needle without actually working them. Then, insert your left needle into the front of both of the slipped stitches and knit them as 1. To finish this round: [8]
    • P1, k2, p2, k2, p1, and finish by knitting the last 2 stitches together (k2tog)
  2. For round 2, k1, p1, k2, p2, k2, p1, k1 across the entire round. Then, for round 3, slip the first 2 stitches onto the right needle and knit them together. Knit 2, p2, k2 until you reach the last 2 stitches. Finish round 3 by knitting the last 2 stitches together. [9]
    • Alternating rib rows and decreases rows helps the hat gradually taper towards the crown.
  3. To make round 4, k3, p2, and k3 across the whole round. Then, to decrease round 5, ssk, k1, p2, k1 across the round. When you reach the last 2 stitches, knit them together. [10]

    Tip: Once you've begun to decrease the hat, you might find it hard to keep knitting on the circular needles. When this happens, slide the stitches onto double-pointed needles. Divide the stitches evenly between 2 or 3 needles and work them with another double-pointed needle.

  4. For round 6, k2, p2 across the entire round. This gives your hat the classic rib stitch. Then, ssk, p2, and k2tog across the rest of round 7. [11]
  5. To make round 8, k1 and p2. Then, continue to k2, p2 until you reach your stitch marker. For the final decreasing row, ssk and k2tog across the entire round. [12]
    • You can probably switch to working with just 2 double-pointed needles at this point.
  6. Cut the yarn to make a tail that's at least 10 inches (25 cm) long and thread it onto a tapestry needle. Then, bring the needle through each of the loops on your needles. Pull the circular needles out to remove them. [13]
    • Don't pull tightly as you draw the needle through the loops since you'll want to thread the yarn through an extra time.
  7. Insert the needle through the same loops around the very top of the hat to secure them and pull tightly to draw the top of the hat closed. Make a knot in the yarn and weave in the yarn tail. Then, weave in the bottom yarn tail. [14]
    • If you like, you can use the top yarn tail to attach a pom pom to the top of the hat.
    8. Advertisement

Expert Q&A

Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Tips

      • If you'd like to check your gauge before you begin this project, knit a 4 in (10 cm) swatch in stockinette. It should measure 22 stitches across and extend to 30 rows.
        Thanks
        Helpful 0 Not Helpful 0
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Things You'll Need

      • 1 skein of DK (light worsted) weight yarn
      • Size 6 US (4 mm) 40 in (100 cm) circular needles
      • Size 6 US (4 mm) double-pointed needles
      • Stitch marker
      • Tapestry needle
      • Scissors

      You Might Also Like

      How to
      Knit a Sweater for Beginners
      How to
      Knit a Beanie
      How to
      Knit a Scarf on a Loom
      How to
      End Knitting a Scarf
      How to
      Knit a Scarf
      Easy Knitting Instructions for Fingerless Gloves
      How to
      Knit Socks
      How to
      Knit an Infinity Scarf
      How to
      Knit an Easy Hat
      How to
      Knit a Baby Hat with Yarn
      How to
      Stop the Edges from Curling when Knitting a Scarf
      How to
      Knit a Poncho
      How to
      Knit a Baby Jumper
      How to
      Knit Sleeves
      Advertisement

      Expert Interview

      Thanks for reading our article! If you’d like to learn more about knitting, check out our in-depth interview with Blythe Nudelman .

      References

      1. ↑ http://stitcheryprojects.com/2011/11/14/basic-ribbed-babychild-hat/
      2. ↑ https://www.craftyarncouncil.com/standards/yarn-weight-system
      3. ↑ https://youtu.be/8P1zwUgKqUY?t=68
      4. ↑ http://stitcheryprojects.com/2011/11/14/basic-ribbed-babychild-hat/
      5. ↑ https://youtu.be/JPsH0FOQQbs?t=159
      6. ↑ https://youtu.be/JPsH0FOQQbs?t=257
      7. ↑ http://stitcheryprojects.com/2011/11/14/basic-ribbed-babychild-hat/
      8. ↑ https://youtu.be/RGwcYW3GG3M?t=39
      9. ↑ http://stitcheryprojects.com/2011/11/14/basic-ribbed-babychild-hat/
      1. ↑ https://youtu.be/_OwA7EYbLRw?t=49
      2. ↑ http://stitcheryprojects.com/2011/11/14/basic-ribbed-babychild-hat/
      3. ↑ http://stitcheryprojects.com/2011/11/14/basic-ribbed-babychild-hat/
      4. ↑ http://stitcheryprojects.com/2011/11/14/basic-ribbed-babychild-hat/
      5. ↑ http://stitcheryprojects.com/2011/11/14/basic-ribbed-babychild-hat/

      About This Article

      Thanks to all authors for creating a page that has been read 28,970 times.

      Did this article help you?

      Advertisement