How to Latch Hook

PDF download Download Article
PDF download Download Article

Latch hooking is a simple weaving technique that involves using a special tool, called a latch hook, to knot short strands of yarn through a grid like fabric base. It couldn't be easier—just loop a piece of yarn around the crook of the latch hook and thread the hooked end under one section of the canvas. Then, pull the latch hook back out the same way you put it in. The shifting latch will catch the yarn, threading it over on itself and anchoring it to the canvas.

Part 1
Part 1 of 3:

Threading the Latch Hook

PDF download Download Article
  1. Each of these kits contains the latch hook tool itself, along with a special grid-like fabric canvas that will serve as a base to which each strand of yarn will be attached. The canvases are constructed of sturdy intersecting strings, and usually measure about 30 inches (76 cm) tall by 24 inches (61 cm) wide.
    • You'll be able to find latch hook kits at most arts and crafts stores, as well as hobby shops that sell knitting supplies. They typically retail for about $10 or less.
    • Most kits also come with templates for basic weaving projects, which can come in handy if it's your first time working with yarn.
  2. Make sure you have enough yarn to bring the design you have in mind to life. The simplest solution is to purchase precut rug yarn, which comes in pieces that are between 2.5 inches (6.4 cm) and 3 inches (7.6 cm) long. However, you can also cut each strand to the desired length yourself to give your finished project a more tailored look. [1]
    • 3-ply acrylic rug yarn will provide the most eye-catching results for most projects.
    • Shop around for yarn in a variety of striking colors that you think would make a good addition to your latch hook tapestry. [2]
    • When cutting your own yarn, each strand should be at least 2 inches (5.1 cm) in length in order to attach securely to the canvas.
    Advertisement
  3. Remove the latch hook canvas from the package and smooth it out on a spacious table or countertop. Make sure the squares form straight, neat rows, and that each square is fully stretched out. [3]
    • If you want to make a basic portrait-style wall hanging, arrange the canvas so that it's sitting in front of you lengthwise. To weave a landscape-style mural, turn the canvas widthwise.
    • Clear your work area of other nearby objects to keep the canvas from getting snagged while you're working.
  4. Adjust the yarn until it rests in the shallow crook just above the handle of the tool. Pull the ends of the strand taut around the latch hook with your opposite hand. A little tension will make it easier to maneuver the tool through the holes in the canvas without losing the yarn. [4]
    • Don't let the yarn drift up towards the latch.
    5. Advertisement
Part 2
Part 2 of 3:

Knotting the Yarn onto the Canvas

PDF download Download Article
  1. Guide the tip of the tool under the string at the edge of the square, then up and out through the other side. Keep sliding it until the crook of the latch hook is nearly level with the square, but don't let the yarn go through. Be careful to only insert the latch hook through one square at a time. [5]
    • Leave about an inch of space around the edge of the canvas in case you decide to mount your handiwork later. [6]
    • If you make a mistake, work the latch hook out of the square and start over.
  2. This will place the strand in the correct position for knotting. It will also get them out of the way so you can concentrate on threading the latch hook. [7]
    • Pinch the loose ends firmly to hold them together. If they come apart, they may end up being two different lengths once the strand has been knotted.
  3. To complete the knot, all you have to do is go back out the way you came. As you withdraw the tool, the swinging latch will gather up the loose ends of the yarn, pulling them under the section that's anchored to the canvas. It's that easy! [8]
    • Repeat this process as many times as desired to cover your canvas with a dazzling, multicolored fringe.
  4. Each time you complete a strand, pause and give the loose ends a quick tug. This will both secure the knot and make the looped section less visible. [9]
    • Latch hook loops aren't as tight as hand-tied knots, which means they're more likely to come undone if they're not properly cinched.
    • Be careful not to pull on the knot too forcefully, or you could stretch out the canvas and leave it looking misshapen.
    5. Advertisement
Part 3
Part 3 of 3:

Refining Your Latch Hooking Skills

PDF download Download Article
  1. When you're first learning how to latch hook, it's best to keep things simple. Try following a template for your first few project to get an idea of how the yarn looks on the canvas. From there, you can move on to freehand shapes like lines and circles a shot.
  2. As you improve, you'll learn to produce more complex patterns and contours and begin producing your own unique designs. These could be anything from formless swaths of color to distinct patterns like stripes, spirals, waves, and rainbows. Advanced latch hookers have even been known to weave detailed portraits and scenes.
    • Don't be afraid to be abstract—experiment with yarn placement and weave whatever patterns your eye suggests.
    • It can be helpful to think of the canvas squares as a guide for forming precise edges and curves, similar to drafting paper.
  3. Rather than spending hours cutting the yarn to size before you make a single knot, wait until your design comes together, then snip the strands wherever you want them to be shorter. Touching up your work after the fact will offer you more control, as it allows you to make just as much of an adjustment as you need instead of being forced to guess at the right length. [10]
    • Trimming the strands to different lengths can lend added texture and dimension to your finished project.
  4. Wrapping, threading, and knotting one strand after another can take all day. By doubling up your yarn, you also stand to double your speed. Line up two separate pieces of the same length, then knot them as you ordinarily would, being careful not to let the two strands overlap in the process. [11]
    • Since you'll have an extra strand to deal with, you'll need to work carefully to avoid mistakes.
    • This method can be especially useful when you're covering a large area with a single color.
    5. Advertisement

Community Q&A

Search
Add New Question
  • Question
    For latch hooking, how do I prevent the canvas from sliding around?
    Community Answer
    I tend to hold it in my lap, but you can also tape the edges to a surface with masking tape. If you do this, make sure it's something that won't get scratched up by the hook.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 1 Helpful 9
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      • To make especially challenging designs easier to follow, trace over the canvas with a felt-tipped marker.
        Thanks
        Helpful 0 Not Helpful 0
      • Stitch your completed latch hook patterns onto sweaters or household items like pillows, afghans, or placemats to provide a little DIY flair.
        Thanks
        Helpful 0 Not Helpful 0
      • Sort your leftover yarn by color and place it in plastic bags to keep it from getting lost or mismatched.
        Thanks
        Helpful 0 Not Helpful 0
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Things You'll Need

      • Latch hook tool
      • Latch hook canvas
      • Yarn
      • Scissors
      • Design templates (optional)

      You Might Also Like

      Step-by-Step Guide for Making a Stunning Dreamcatcher
      How to
      Make Dog Yarn
      How to
      Make a Yarn Doll
      How to
      Tell Wool Yarn from Acrylic Yarn
      How to
      Display Embroidery Without a Hoop
      How to
      Card Wool
      How to
      Weave Rope Seats
      How to
      Use a Yarn Winder
      How to
      Make a Rag Rug
      How to
      Hook a Rug
      How to
      Weave a Rag Rug
      How to
      Weave on a Loom
      Advertisement

      Expert Interview

      Thanks for reading our article! If you’d like to learn more about knitting and crochet, check out our in-depth interview with Suzi Quillen .

      References

      1. ↑ https://www.dreamalittlebigger.com/post/how-to-latch-hook.html
      2. ↑ http://abeautifulmess.com/2017/08/latch-hook-wall-hanging-diy.html
      3. ↑ https://www.dreamalittlebigger.com/post/how-to-latch-hook.html
      4. ↑ http://www.leftsource.com/instructions.php
      5. ↑ http://www.leftsource.com/instructions.php
      6. ↑ https://www.dreamalittlebigger.com/post/how-to-latch-hook.html
      7. ↑ https://www.youtube.com/watch?v=sdWArMj4AxA&feature=youtu.be&t=25
      8. ↑ http://abeautifulmess.com/2017/08/latch-hook-wall-hanging-diy.html
      9. ↑ http://www.leftsource.com/instructions.php
      1. ↑ http://abeautifulmess.com/2017/08/latch-hook-wall-hanging-diy.html
      2. ↑ http://abeautifulmess.com/2017/08/latch-hook-wall-hanging-diy.html

      About This Article

      Article Summary X

      If you want to latch hook, lay out the canvas from your kit in front of you and wrap the yarn tightly around the latch hook. For your first project, consider following a template to create a design. To start your pattern, thread the latch hook through one of the squares, taking care not to let the yarn go through. Then, pinch the loose ends of the yarn, pull them to the side, and pull the hook back out through the hole. Repeat this process until you complete your pattern, stopping regularly to tighten the knot as this will make the looped section less obvious. If you want to learn how to add different designs to your canvas, keep reading the article!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 59,812 times.

      Did this article help you?

      Advertisement