How to Level a Door

PDF download Download Article
PDF download Download Article

An uneven door can be unsightly and annoying, especially if it keeps catching and sticking to the door frame. Luckily, there are a few ways you can fix the issue and make your door level again. If the door itself is uneven, you can shim the hinges to adjust it. You can also add shims to a door frame if it’s uneven or warped. If you’ve got a problem with your door sticking, there are a few things you can try to solve the problem.

Method 1
Method 1 of 3:

Shimming the Hinges

PDF download Download Article
  1. Shut your door all of the way and take a look at the crack between the door and the frame. Look for places where the spacing is uneven, such as near the top or the bottom of the door to figure out which hinge needs to be shimmed. [1]
    • For instance, if the space between the door and the frame is smaller at the top of the door, then you’ll need to add shims to the bottom hinge to correct the imbalance.
  2. Open the door to expose the screws in the hinges. Use a screwdriver to remove the screws from the hinge you’re removing. Set the screws aside so you can replace them later and pull the hinge off of the door and frame. [2]
    • If you need to shim multiple hinges, remove 1 at a time so you don’t have to take the whole door off.
    Advertisement
  3. Take a clean sheet of cardboard and lay it on a flat working surface such as a table or the ground. Fold the hinge closed and place it on top of the cardboard. Use a utility knife to cut out an outline from the cardboard. Then, move the hinge to another spot on the cardboard and cut out another outline. Cut out at least 2-3 cardboard shims. [3]
    • If your door is really uneven, cut out 5-6 cardboard shims, just in case.
  4. 2 shims will be enough for a door that’s slightly uneven, but if part of the door is touching the frame when you checked the spacing, use 3 shims. Hold the cardboard shims on the backside of the hinge and place the hinge back against the door frame, in the spot where you removed it from. Use a screwdriver to drive the screws through the cardboard and into the door frame. Then, replace the screws that attach the hinge to the door itself. [4] [5]
    • You could use a power drill to drive the screws in as well.
  5. Close the door again and look at the spacing between the door and the frame. If it’s still uneven, remove the hinge, add another cardboard shim to the backside, reinstall the hinge, and check the spacing again. Add as many shims as it takes to make the spacing between the door and frame even. [6]
    6. Advertisement
Method 2
Method 2 of 3:

Adding Shims to the Door Frame

PDF download Download Article
  1. Use a screwdriver to remove any screws attached to the door and molding around the frame. Insert the flat end of a chisel into the crack of the molding and tap it lightly with a hammer. Carefully pry off the molding and set it aside. Then, pry off the doorstop strip and set it aside as well. [7]
    • Carefully remove the doorstop and molding so you don’t damage it and can replace it easily.
  2. Cedar shingles are wooden roof shingles that work great to help fill the gap as a shim. About 1 foot (0.30 m) from the floor, insert 1 shingle vertically and 1 horizontally in the space between the studs and door jamb. Adjust them so they fit snugly in the space. [8]
    • Use your hammer to lightly tap the shims into place if you’re having trouble inserting them.
  3. Add a pair of cedar shingles as shims to the space between the studs and jamb. Place them at the top, center, and bottom so it’s balanced and even. [9]
  4. Use a level to check that the frame is even. Place the level against the frame to see if it’s level, which will help level the door. If it isn’t even, add more shims to adjust it further until it is perfectly level. [10]
    • Make small adjustments with your shims and use your level often to find the perfect balance.
  5. Replace the molding and screws and then put the doorstop back into place. Close the door to test that its level. If it’s still uneven, you may need to adjust the hinges on the door. [11]
    • It’s possible the foundation of your home needs to be professionally repaired as well. You may want to contact a building inspector to make sure there aren’t structural issues making your door uneven.
    6. Advertisement
Method 3
Method 3 of 3:

Fixing a Door That Sticks

PDF download Download Article
  1. Humidity in the air of your home can cause the wood in your door and door frame to swell and expand, which can cause it to stick. Plug in a dehumidifier in the room to keep the humidity levels low and constant. [12]
    • You can find dehumidifiers at your local department store, home improvement store, or by ordering them online.
  2. Open and close your door a few times while you look at the hinges. If they’re rusty, squeaky, or feel stiff while you move the door, you may be causing your door to stick. Spread petroleum jelly or spray a lubricant like WD-40 into the hinges of your door. Open and close your door a few times to work the lubricant into the hinges and see if that fixes the problem. [13]
    • If your door continues to stick, the problem likely isn’t in the hinges.
  3. Loose screws can cause the door to be uneven, which can make it stick. Open up your door all of the way and take a look at the screws on the hinges. If any of them are loose or sticking out of the frame or door, use a screwdriver to tighten them and try opening and closing your door to see if it still sticks. [14]
    • If your screws keep coming loose, try installing longer ones with a drill.
  4. A block plane is a sharp blade that you push by hand to shave off small slivers of wood. If you’ve tried multiple solutions, but your door still sticks in a specific location, use a block plane to shave off a small layer. Then, open and close the door to test it. Keep shaving off 1 layer at a time until it’s level and doesn’t stick. [15]
    • You can find block planes at your local hardware store or by ordering them online.
    • Shaving off pieces of the door makes it uneven and can weaken its structural integrity, so only do it as a last resort.
    5. Advertisement

Expert Q&A

Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      Advertisement

      Things You’ll Need

      Shimming the Hinges

      • Screwdriver
      • Sheet of cardboard
      • Utility knife
      • Screwdriver

      Adding Shims to the Door Frame

      • Hammer
      • Chisel
      • Cedar shingles
      • Level
      • Screwdriver

      You Might Also Like

      5 Ways to Fix a Broken Door Frame
      How to
      Adjust Door Hinges
      How to
      Fix and Repair a Damaged Hollow Core Door
      How to
      Fix a Rubbing Door
      How to
      Remove a Door Hinge Pin
      How to
      Seal a Door
      How to
      Lubricate Door Hinges
      How to
      Fix a Stripped Screw Hole in a Door Hinge
      How to
      Stop Squeaky Door Hinges
      How to
      Plane a Door
      Simple Ways to Adjust Self-Closing Spring Hinges
      Adjusting French Doors: Your Top Problems Solved
      How to
      Repair a Door Chime
      5 Ways to Fix a Jammed Door & Stop It From Sticking
      Advertisement

      References

      1. ↑ https://youtu.be/BsoovHy8euc?t=25
      2. ↑ https://youtu.be/BsoovHy8euc?t=130
      3. ↑ https://www.thisoldhouse.com/doors/21017193/how-to-repair-a-skewed-door
      4. ↑ Emily Fazio. Home Improvement & DIY Specialist. Expert Interview. 27 July 2021.
      5. ↑ https://www.thisoldhouse.com/doors/21017193/how-to-repair-a-skewed-door
      6. ↑ https://www.thisoldhouse.com/doors/21017193/how-to-repair-a-skewed-door
      7. ↑ https://youtu.be/hLL2RxZsICk?t=37
      8. ↑ https://www.bobvila.com/articles/how-to-shim-a-door/
      9. ↑ https://www.bobvila.com/articles/how-to-shim-a-door/
      1. ↑ https://youtu.be/hLL2RxZsICk?t=310
      2. ↑ https://youtu.be/hLL2RxZsICk?t=340
      3. ↑ https://www.cbsnews.com/news/stop-your-doors-from-sticking/
      4. ↑ https://youtu.be/mp65j3wQioc?t=20
      5. ↑ https://www.thisoldhouse.com/doors/21016673/how-to-fix-a-door-that-sticks
      6. ↑ https://www.thisoldhouse.com/doors/21016673/how-to-fix-a-door-that-sticks
      7. ↑ Emily Fazio. Home Improvement & DIY Specialist. Expert Interview. 27 July 2021.

      About This Article

      In other languages
      Thanks to all authors for creating a page that has been read 100,673 times.

      Reader Success Stories

      • Elizabeth Miner

        Mar 4, 2023

        "My mother has an issue with closed doors. After several years of being open and never latching shut, her bedroom ..." more
      Share your story

      Did this article help you?

      Advertisement