PDF download Download Article PDF download Download Article

Loading a dishwasher is not difficult, but loading it properly can help your dishes come out cleaner. It can also save energy and time.

Get Product Support Solve Any Problem

wH
Hi there! Do you have a question about how to use or repair your home appliance? I’ve read the manuals so you don’t have to. Select your product, brand, and model, then ask away!
*
*
Method 1
Method 1 of 2:

Loading Effectively

PDF download Download Article
  1. Face them toward the center and, if they lean at all, lean them inwards and downwards. [1] This is because the tubes, jets and rotating devices spray water outward from the center; down and outward from the top; and, up and outward from the bottom of the dishwasher.
    • Try to keep all surfaces separated and accessible to the stream of water from the sprayers.
  2. Stack the bowls neatly on an incline, so that the washing solution can reach inside the bowl and so that they will drain. This also allows you to fill in more space.
    Advertisement
  3. Because the heating element in most dishwashers is on the bottom, placing plastic items in the bottom rack could cause them to melt or warp. [2]
    • Do not crowd or overload the dishwasher.
    • If necessary, hand wash large items or run the dishwasher a second time.
  4. Place knives, forks and spoons in the cutlery basket, handle down. In general, dangerous or sharp knives should be washed by hand, as they dull in the dishwasher. Any wood handled or wood utensils should not go in the dishwasher. [3]
    • Distribute the cutlery loosely, and position the soiled surfaces of the spoons and forks apart so that the water can reach them. Separation is key.
    • Long pieces of cutlery can block the spray from tubes, nozzles and rotating devices. These items should be laid down in the upper basket.
    • Lay larger serving utensils in the top section of the dishwasher. Arrange serving spoons with the bowl facing down so that water does not collect in them.
  5. Place cutting boards and large trays on the very outside of the bottom section of the dishwasher if they will not fit in the slots designated for plates. It may be better to just hand wash your cutting boards though as the heat from the dishwasher often warps cutting boards. [4]
  6. If you have a plastic, mesh-like piece that folds up and down on the top rack, this is likely meant to hold onto wine-glass stems. This is a great way to keep fragile pieces from getting scratched or cracked.
  7. Check that spinning arms and rotating devices spin freely and that there is nothing obstructing tubes or sprayers before each run. Also, make sure that the detergent cups can open fully. If any of these things are obstructed or blocked, it will make it much harder to get a good wash.
  8. Fill to the designated line.If you use pellet-style detergent, simply use one pellet by placing it on the bottom edge of the dishwasher door before closing, Depending upon the temperature of the water and the length of the washing cycle, some of the wraps from the pellet bag may not completely dissolve which eventually plugs the drain. For this reason, some dishwasher manufacturers may not recommend the use of pelletized soap.
    • Fill the soap container on the door of the dishwasher first if you have two. It is timed to open after the dishwasher does some pre-rinsing to soften up the dirt on its own.
    • Only fill the second soap well if you have had issues with cleaning before, or you know a load is particularly dirty.
  9. Advertisement
Method 2
Method 2 of 2:

Getting the Most of your Dishwasher

PDF download Download Article
  1. Remove things like bones, corncobs, seeds, and peelings, etc. Anything thick and caked on should be removed, but even smaller particles, like grains of rice, may or may not come off in your dishwasher. While you don't want to wash your dishes, wiping off with a dirty fork or napkin will lead to much better results later.
    • Pre-rinse, but only if it is necessary. Most dishwashers and dishwasher detergents actually do a better job if they have something to remove. If your dishes aren't coming out clean, though, it might be best to use a quick spritz of water before the food hardens onto the dishes.
  2. Proteins such as eggs and cheese; cooked- or baked-on foods; and starches that have dried onto the dish often require extra attention. A light pre-wash and scrub can make your dishwasher much more effective. You could also soak the plates in the sink before starting the dishwasher.
  3. This will help to reduce water spots, especially if you have hard water. The rinse aid may not need refilling every time you run the dishwasher, but do top it off every couple of weeks to a month, or according to the instruction manual.
    • You can replace commercial rinse aid with white vinegar in a pinch, with little difference in quality.
    • Some dishwasher detergent has rinse aid in it. Read the label.
    • If you have a water softener, or if your water is reasonably soft to begin with, you may find that rinse aid is unnecessary.
  4. Dishwashers often drain into the same pipe as the sink, so it's important that the pipe is clear. If you don't have a garbage disposal, use a strainer in the sink drain to stop crumbs and debris from accumulating in the pipe.
  5. "' Modern dishwashing detergent actually eliminated dangerous phosphates, replacing them with enzymes that react at any water temperature. This saves you energy and money.
  6. Dishwashers can heat up the water somewhat, but they usually work best when the water starts hot. If water is scarce, run the water into a container and use it to water plants or other purposes.
  7. 7
    Don't overcrowd the dishwasher, as it traps food on your dishes. You should never be stacking things, or forcing everything into weird angles. Load the dishwasher up so that it is snugly packed, but not terribly crowded. [5] Note any issues if you end up with a "bad wash." Did you overcrowd the trays and prevent anything from getting the best clean?
  8. Advertisement

Community Q&A

Search
Add New Question
  • Question
    How much power is used by a dishwasher?
    Community Answer
    It varies by manufacturer and model number, but in general, most dishwashers (on hot wash) will draw 1000-1500 watts for the majority of the wash/rinse cycle and heated-dry (if applicable). The heating element is what consumes the most amount of power, so if you can get clean dishes on cold water without the heater (assuming your dishwasher offers such an option), the power consumption goes down considerably. Without the heater, the machine will typically only draw approximately 200-300 watts. (This is for the remaining electricals; 99% of that being exclusively for the pump(s), and 1% for the timer, relays, solenoid valves, control electronics, etc.)
  • Question
    I used a detergent packet and after running a load, the dishes are not clean and the packet is still intact. What happened?
    Community Answer
    Make sure that the detergent door is able to open with the dishes in there, and that dishes are not stopping it from opening. If that doesn't work, just set the packet on the door before you shut it. It will fall to the bottom of the tub and will still work!
  • Question
    Why are my dishes wet after the cycle is complete?
    Community Answer
    Your dishwasher may not have a drying cycle. It might also be over-packed, not allowing the air to circulate properly, therefore not drying the dishes.
See more answers
Ask a Question
      Advertisement

      Video

      Reader Videos

      Tips

      • Run full loads. Running a full load in your dishwasher can save water compared to washing dishes by hand, especially if you don't overdo it on the pre-rinsing.
      • Load the dishwasher as you go. Get in the habit of setting your dish down in the dishwasher, instead of the sink.
      • Store powdered detergents in a dry place until they are ready for use.
      Show More Tips
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      • Hand wash wood items and ones with wood handles.
      • Avoid putting aluminum, silver, silver plates, and other reactive metals in the dishwasher. Their finish will corrode and tarnish.
      • Do not fill the soap container past the designated line.
      • Only use dishwasher detergent in the dishwasher. Do not use dishwashing soap or dishwashing liquid.
      • Do not place items larger than the height of the bottom section into the dishwasher. This will cause difficulties in opening the dishwasher when the washing is finished.
      • Consider hand washing delicate crystal and wine glasses. If you do put them in the dishwasher, be sure they are placed so that they cannot rattle against other dishes or glass as they tend to break.
      Advertisement

      About This Article

      Article Summary X

      To properly load a dishwasher, insert plates in the slots on the bottom rack so that they face towards the center. Place cups, glasses, and bowls in the top rack at an angle. Any plastic items should also be placed on the top rack so they don’t melt, since the heating element in most dishwashers is on the bottom. Cutlery should go handle-down in the basket, and if you have room, you can place pots and pans in the bottom rack, but do not overcrowd the dishwasher. Fill the soap container with dishwasher detergent, then close the door and turn on the machine. If you want to learn more, like how to add a pre-rinse solution to your dishwasher, keep reading!

      Did this summary help you?
      Thanks to all authors for creating a page that has been read 1,042,246 times.

      Reader Success Stories

      • Robyn Miller

        May 30, 2017

        "Dishwashing liquid used instead of dishwasher detergent helped. Salt and vinegar worked after a rinse. I scooped ..." more
      Share your story

      Did this article help you?

      Advertisement