How to Loosen up a Stiff Knife

PDF download Download Article
PDF download Download Article

Are you breaking your fingernails and cursing each time you attempt to open your knife? Well, it's time to fix that stiff knife, keep your fingernails intact and ensure that those around you hear nothing but silence.

Method 1
Method 1 of 5:

Examining

PDF download Download Article
  1. Tightness or stiffness in a knife comes from several sources and each needs to be handled a slightly different way. The typical causes are: Rust or aging, goop stuck on the knife, friction and tight hinges. Each of these is explored in the methods below, providing a solution for you to try.
    2. Advertisement
Method 2
Method 2 of 5:

Rust/age

PDF download Download Article
  1. Does the blade or hinge look slightly orange? Or even slightly powdery or white? This could be caused by the metal in the knife oxidizing to the point of the blades adhering to the casing or each other.
  2. Then, buff it clean in a day or two. Once you've done this, keep the knife oiled from then on. [1]
  3. In this case, the metal parts need a good soak without getting the rust removal fluid on the non-metal parts. You can do this by masking the area off with tape, by using tiny brushes or "Q-tips", etc.
  4. Use a heavy towel or wear gloves to protect your fingers from the blade(s) during this process.
    5. Advertisement
Method 3
Method 3 of 5:

Goop

PDF download Download Article
  1. Is it sticky? Did the knife fall into something that is just not wiping off easily?
  2. How successful this will be depends on the type of "goop" it is. If you have no idea, it is best to start with the mildest cleaner available and progress to the strongest. Try cleaning agents in this order (rinsing and drying thoroughly in between): Water, ammonia, light mineral oil, "tape remover" or "goop remover" products from the store. [2]
  3. This will prevent future oxidation. [3]
    4. Advertisement
Method 4
Method 4 of 5:

Friction

PDF download Download Article
  1. Sometimes a knife "sticks" because its blades were too snugly squeezed at the factory when the hinge(s) were pressed or riveted in. Loosen it as follows.
  2. [4]
  4. [5]
    6. Advertisement
Method 5
Method 5 of 5:

Loosening the hinges

PDF download Download Article
  1. 1
    Inspect the knife for a screw at the base of the blade. It may be under the clip. Depending on the knife, you may need to remove the clip to access the screw.
  2. 2
    Use a small screwdriver to loosen the screw holding the blade in place. Be sure to not loosen the screw too much as the blade could potentially fall out.
  3. 3
    Replace the clip if needed. Check that the blade moves smoothly.
    4. Advertisement

Community Q&A

Search
Add New Question
  • Question
    I have a tactical force joker knife and it is painfully hard to open with my index finger . I don't have problems like this with other knives. How can I make it easier to open?
    Princess XStaSy
    Community Answer
    What I did was wrap a piece of a plastic envelop around the blade. The plastic is easier to grip than metal. just leave it a little longer then the top of the blade.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 11 Helpful 4
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!

      You Might Also Like

      Hone and Grind a Dull Blade Using These Simple At-Home Techniques
      The Best Way to Clean Your Knives
      How to
      Forge a Knife
      How to
      Wrap a Knife Handle with Paracord
      How to
      Close a Pocket Knife
      How to
      Use a Cutting Torch
      How to
      Measure Chainsaw Chain
      How to
      Replace an Axe Handle
      3 Easy Ways to Sharpen a Pocket Knife at Home
      How to
      Sharpen a Hand Saw
      How to
      Sharpen Pinking Shears
      How to
      Use a Punch Down Tool
      How to
      Use a Reciprocating Saw
      How to
      Sharpen an Axe
      Advertisement

      References

      1. ↑ https://boyslife.org/outdoors/ask-the-gear-guy/34582/how-to-clean-a-dirty-pocketknife/
      2. ↑ https://www.outdoorgearlab.com/expert-advice/how-to-clean-a-pocket-knife
      3. ↑ https://www.seriouseats.com/2018/09/mineral-oil-is-good-for-cutting-boards-and-knives.html
      4. ↑ https://www.artofmanliness.com/articles/how-to-restore-a-vintageantique-pocket-knife/
      5. ↑ https://www.artofmanliness.com/articles/how-to-restore-a-vintageantique-pocket-knife/

      About This Article

      In other languages
      Thanks to all authors for creating a page that has been read 116,020 times.

      Did this article help you?

      Advertisement