How to Lower Chlorine in a Salt Water Pool

PDF download Download Article
PDF download Download Article

A saltwater pool requires chlorine to keep the water clean and swimmers safe. If the chlorine level gets too high though, such as over 5.0 ppm, it can irritate your skin, eyes, and nose. Fortunately, you can lower the chlorine level in your saltwater pool quickly and easily using several methods.

Method 1
Method 1 of 2:

Reducing the Chlorine Level

PDF download Download Article
  1. Many saltwater pools have a chlorine generator, feeder, or chlorinator that releases free chlorine into the water. Locate the control panel box and turn down the dial 1 level. Retest your water the following day and further adjust the dial or turn off the machine, if necessary. [1]
    • If you turn off the machine, be sure to test the water 2-3 times per day, and turn the machine back on when the chlorine drops below 3.0 ppm.
  2. You may have chlorine tablets or a chlorine floater in the pool. If so, remove these items immediately so they stop increasing the amount of chlorine in the water. Don’t replace these items until the chlorine level has dropped below 3.0 ppm. [2]
    Advertisement
  3. Sunlight is incredibly effective at reducing the amount of chlorine in a pool! The UV rays break down the chlorine and allow it to evaporate. Simply leave your pool uncovered and exposed to direct sunlight. [3]
    • With no cyanuric acid (CYA) in the pool up to 90% of the chlorine can evaporate in as little as 2 hours on a hot, sunny day, so be sure the level doesn’t drop below 1.0 ppm.
  4. Purchase a chemical that neutralizes chlorine, like sodium sulfite or sodium thiosulfate. Follow the instructions on the package for use. Typically, you’ll add a dose to the skimmers with the filter running, and the chemicals will quickly lower the amount of chlorine in the water. [4]
    • You should be able to find these chemicals at pool supply stores and online.
  5. If the chlorine levels are really high, you can simply swap out some of the existing water for freshwater. Siphon 25% of the water out of the pool, then add freshwater to it. [5] To siphon out the water:
    • Submerge a tube in the pool and allow it to completely fill up with water.
    • Plug 1 end of the tube and transfer it to an empty container at a lower elevation than the pool.
    • Unplug the end of the tube and allow it to drain into the container.
    • Pull the tube out of the pool when you’ve siphoned enough water. [6]
    6. Advertisement
Method 2
Method 2 of 2:

Testing the Chlorine Level

PDF download Download Article
  1. Saltwater test strips are easy to use and are a cheaper alternative to a testing kit. However, a testing kit may give you a more accurate reading of the chlorine levels of the pool. Be sure to choose a kit or strips formulated for use in saltwater pools. You can find saltwater test strips and kits from pool supply stores as well as online. [7]
  2. Dunk the saltwater test strips into the water, then compare the color the paper turns with the provided chart to find out how much chlorine is in the water. [8] Alternatively, fill up a test kit with water from the pool. Add the specified number of the appropriate droplets to the chlorine chamber and compare the color of the water to the provided chart to find out the chlorine level. [9]
    • Make sure you’re testing free chlorine, not total chlorine, as the free chlorine is what is available to kill germs and bacteria in the water.
    • Follow the specific directions including with your test strips or kit.
  3. Saltwater pools require “free” chlorine to kill harmful bacteria that could make swimmers sick. On average, your saltwater pool should have a free chlorine reading of 1.0 to 3.0 ppm. If the level drops below 1.0 ppm, the water is not safe to swim in until chlorine is added. [10]
    4. Advertisement


Community Q&A

Search
Add New Question
  • Question
    The chlorine in my saltwater pool is very high but the pool store told me to add stabilizer. Why?
    Lee Ton
    Community Answer
    Odds on that by the time I finish typing this answer your chlorine (FC) level will be much lower. Your FC level will be reduced by sunlight or it will be broke down by day-to-day use of the pool. The stabilizer will, however, help "tame" the FC and make it less harsh, but it won't lower the levels. Do a search for the FC/CYA ratio and you may further understand how stabilizer and chlorine work together.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 2 Helpful 0
  • Question
    How do I test the salt level in a saltwater pool?
    Lee Ton
    Community Answer
    There are both test strips and drop based reagents on the market that test salt levels. You simply follow the directions on the product to test your salt level in the pool.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 0 Helpful 0
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      You Might Also Like

      How to
      Properly Maintain Swimming Pool Water Chemistry
      Quick & Effective Ways to Get Rid of Algae in Your Pool
      How to
      Acid Wash a Swimming Pool
      How to
      Clean a Sand Filter
      How to
      Chlorinate a Pool
      How to
      Add Salt to a Pool
      How to
      Raise pH in Pool
      How to
      Get Rid of Green Water in a Swimming Pool
      How to
      Chlorine Wash a Pool
      How to
      Convert a Salt Water Pool to Chlorine
      Advertisement

      References

      1. ↑ https://youtu.be/724u6tYgB3Y?t=52
      2. ↑ https://www.freedrinkingwater.com/blogs/water-health/proper-chlorine-levels-for-a-healthy-pool
      3. ↑ https://sciencing.com/heat-sun-affect-pool-chlorine-21723.html
      4. ↑ https://www.freedrinkingwater.com/blogs/water-health/proper-chlorine-levels-for-a-healthy-pool
      5. ↑ https://www.freedrinkingwater.com/blogs/water-health/proper-chlorine-levels-for-a-healthy-pool
      6. ↑ https://kids.britannica.com/students/article/siphon/277075
      7. ↑ https://www.choice.com.au/outdoor/pools/cleaning-and-maintenance/articles/pool-maintenance-guide
      8. ↑ https://youtu.be/724u6tYgB3Y?t=33
      9. ↑ https://youtu.be/mKD7fphxWJI?t=20
      1. ↑ https://youtu.be/724u6tYgB3Y?t=49

      About This Article

      Article Summary X

      To lower the chlorine level of a saltwater pool, reduce the output from the chlorinator, chlorine feeder, or chlorine generator. If your pool doesn’t have any of these, remove any chlorine tablets or chlorine floaters from the water. To further lower the chlorine level, you can swap out 25% of the water for freshwater or add chlorine-neutralizing chemicals to the pool. To learn how to test your saltwater pool for appropriate chlorine levels, read on…

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 117,663 times.

      Reader Success Stories

      • Kathy Harvey

        May 4, 2022

        "Our chlorine level in our saltwater pool just reads high on our pool tester. We were looking for ways to get it ..." more
      Share your story

      Did this article help you?

      Advertisement