How to Lubricate a Garage Door

Co-authored by Patrick Johns

Last Updated: September 29, 2023 Fact Checked

An improperly maintained garage door can cause it to become loud and squeaky. More importantly, a noisy door is a sign that your garage door isn't greased enough, which could lead to more serious damage later on. Luckily, with proper maintenance and lubrication, you can prevent the noise and extend the life of your garage door. ^{[1]
X
Research source}

Things You Should Know

Clean out your door's tracks by using a damp rag and a vacuum. That way, your rollers won't get stuck.
Use lithium-based grease and garage door lube to clean the moving pieces of the garage door.
Be sure to clean out the hinges, rollers, bearing plates, lock, and finally, the top of the rail.

Part 1

Part 1 of 2:

Cleaning the Tracks

Download Article

Use the remote or close the door manually. This will allow you to access the tracks and the rest of the moving parts on your door.
2
Cut power to the door. Before lubricating your door, you'll want to make sure that it's not on. Disconnect your garage door from the power source after you close it. ^{[2]
X
Research source}
- If the plug to your garage door opener is hard to reach or hard-wired, turn off the breaker that controls it in your circuit box.
Advertisement
3
Clean out the tracks with a damp rag. The tracks are what the garage door rollers ride on to open and close. You don't want to lubricate these, but you do want to make sure that they are completely cleaned out for your door to operate correctly. Wipe down the inside of both tracks and remove any dirt and debris. ^{[3]
X
Research source}
- Make sure that there is no debris left in your tracks that the rollers can get stuck on.
- Use an automotive brake cleaner to loosen and wash away grime.
If you are having issues getting debris out of the tracks, you can use a vacuum with a hose extension to suck out the dirt and debris. This is a great solution to reach the higher portion of the tracks that you may be having issues reaching. ^{[4]
X
Research source}

Part 2

Part 2 of 2:

Lubricating the Moving Parts

Download Article

1
Purchase a lithium-based grease or garage door lube. Popular standard degreasers like WD-40 aren't the best option for a garage door. ^{[5]
X
Expert Source

Patrick Johns
Home Improvement Specialist

Expert Interview. 26 October 2021.} Instead, purchase a lithium-based grease at a hardware store or online. ^{[6]
X
Expert Source

Barry Zakar
Handyman

Expert Interview. 20 August 2020.} There are also certain greases that are made specifically for garage doors. Do not use oil. ^{[7]
X
Research source}
- Garage door grease will typically come in an aerosol or spray can.
- Oil is susceptible to dirt and dust buildup and is more likely to drip than garage door grease or lube. Read the label to make sure that the grease that you are using is appropriate for your doors.
Slowly lift your garage door up manually and spray each hinge as it meets the bend of the track. This will lubricate the moving parts on the door and will make opening and closing the garage door much smoother. Use one or two sprays on each hinge. Your hinges should be covered in lubricant. ^{[8]
X
Research source}
3
Lubricate the rollers. ^{[9]
X
Expert Source

Barry Zakar
Handyman

Expert Interview. 20 August 2020.} The rollers are the circular moving pieces on your garage door and are attached to each of your hinges. Inside of these rollers are small ball bearings that need to be lubricated for your door to open and close smoothly. ^{[10]
X
Expert Source

Barry Zakar
Handyman

Expert Interview. 20 August 2020.} Use the thin hose attachment to spray the grease inside of the rollers. Wipe out any excess lubricant so your door doesn't become unbalanced.
- Any exposed ball bearings must be thoroughly lubricated.
- Don't spray any lubricant on nylon rollers.
4
Spray the outside of your springs and bearing plates. The springs can usually be found at the top of the garage door and must be fully lubricated as well. ^{[11]
X
Expert Source

Patrick Johns
Home Improvement Specialist

Expert Interview. 26 October 2021.} The bearing plates are the moving circular parts on both sides of the springs. Spray down the outside of the springs and near the center of the bearing plates, then open and close your garage door to spread the grease around. ^{[12]
X
Research source}
- You will most likely need a step ladder to reach the springs and bearing plates.
- If your springs are making noises, you need to grease your springs.
- If your springs are damaged or bent, have them replaced before moving on.
Lubricating the lock will make locking your garage door easier, and can prevent rust in the long run. Point the lubricant towards the lock's keyhole and spray it once to lubricate it. Once you're done lubricating the lock, finish lubricating your garage door by spraying the grease on the large armbar at the top of your door. ^{[13]
X
Research source}
6
Lubricate the top of the rail. The rail is the portion that your chain rides on and should run along your garage's ceiling. The top portion of the rail is what your chain actually rides along, so it's the part that needs to be lubricated. ^{[14]
X
Expert Source

Patrick Johns
Home Improvement Specialist

Expert Interview. 26 October 2021.} Spray down the top of the rail and then spread the grease around with a rag. ^{[15]
X
Research source}
- The chain comes with a natural protectant on it that makes it so that you don't have to grease it regularly.
- Spraying the bottom of the rail doesn't do anything.
- Consult the owner's manual to see how to lubricate and maintain your specific garage door opener.

Expert Q&A

Search

Add New Question

Question

What should I do to ensure that the garage door works properly?

Patrick Johns
Home Improvement Specialist
Patrick Johns is a Home Improvement Specialist and the Owner of CatchAll Handyman Services. With more than 28 years of experience, he has worked on a variety of home improvement projects, such as carpentry, plumbing, and door and window installations in both commercial and residential properties.

Patrick Johns

Home Improvement Specialist

Expert Answer

Lubricate the parts from time to time to ensure that the garage door works properly. It will also prevent them from rusting.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 6 Helpful 11
Question

Why is WD-40 not suitable for a garage door?

Patrick Johns
Home Improvement Specialist
Patrick Johns is a Home Improvement Specialist and the Owner of CatchAll Handyman Services. With more than 28 years of experience, he has worked on a variety of home improvement projects, such as carpentry, plumbing, and door and window installations in both commercial and residential properties.

Patrick Johns

Home Improvement Specialist

Expert Answer

WD-40 is not suitable for a garage door because it can attract moisture, corrode, and cause working mechanisms to break.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 16 Helpful 12
Question

Should I oil my garage door rollers?

Barry Zakar
Handyman
Barry Zakar is a professional handyman and the founder of Little Red Truck Home Services based in the San Francisco Bay Area. With over ten years of experience, Barry specializes in a variety of carpentry projects. He is skilled at constructing decks, railings, fences, gates, and various pieces of furniture. Barry also holds his MBA from John F. Kennedy University.

Barry Zakar

Handyman

Expert Answer

No, do not use oil on your garage doors. Instead, use grease or silicone spray, which is available at any hardware or home improvement store.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 12 Helpful 26

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Video

Tips

If lubricating the rollers doesn't work, consider replacing them with nylon or plastic rollers. ^{[16]
X
Expert Source

Barry Zakar
Handyman

Expert Interview. 20 August 2020.}

Thanks
Helpful 2 Not Helpful 1
Be mindful of the black boxes at the bottom of your garage door. If you accidentally move one of them, the invisible beam will be obstructed and the garage door won't close.

Thanks
Helpful 5 Not Helpful 0
If your garage door is not working properly, you can replace it and install a new door.

Thanks
Helpful 2 Not Helpful 13

Submit a Tip

All tip submissions are carefully reviewed before being published

Name

Please provide your name and last initial

Submit

Thanks for submitting a tip for review!

Things You'll Need

Lithium based or garage door grease
Rag
Step ladder

[1]

[2]

[3]

[4]

[5]

Expert Source

Patrick Johns
Home Improvement Specialist

[6]

Barry Zakar
Handyman

[7]

[8]

[9]

[10]

[11]

[12]

[13]

[14]

[15]

[16]

Log in

How to Lubricate a Garage Door

Things You Should Know

Steps

Cleaning the Tracks

Lubricating the Moving Parts

Expert Q&A

Video

Tips

Things You'll Need

You Might Also Like

References

About This Article

Reader Success Stories

Did this article help you?

Quizzes

You Might Also Like

Featured Articles

Trending Articles

Featured Articles

Featured Articles

Watch Articles

Trending Articles

Quizzes

Explore Categories