PDF download Download Article PDF download Download Article

Antibacterial ointment can be a great way to keep minor cuts clean and prevent infections. Store-bought varieties like Neosporin are the most popular ones, but you might be curious if you can make your own at home with natural ingredients. Unfortunately, doctors really don’t recommend making your own ointment, and it probably won’t be as effective as a store-bought type. If you do need antibacterial cream, it’s best to buy a prepared type from a pharmacy instead. If you’d like to try making your own, the process is pretty simple, so you can give it a shot and see if it works for you.

Part 1
Part 1 of 2:

An Unofficial Ointment Recipe

PDF download Download Article

While doctors don’t recommend making your own antibacterial ointments, there are several natural ingredients that have antibacterial properties and could make good additions to a homemade cream. If you’d like to make your own, then you can follow these simple steps to whip up a homemade ointment. This recipe comes from bloggers and is not approved by doctors or any agencies like the FDA, so make sure you use it with caution.

  1. Put coconut oil, [1] castor oil, [2] and beeswax [3] into a double boiler. Each of these ingredients has antibacterial properties and could help prevent infections. They also make a good base for your ointment. Add 1/2 cup (120 ml) of coconut oil, 1/2 cup (120 ml) of castor oil, and 1 oz (28 g) of beeswax into a double boiler. [4]
    • Each of these ingredients is available from most supermarkets or health food stores.
    • A double boiler is important because if you put the oils over a direct flame, they might burn. Make sure you fill the bottom section with water or it won’t work.
    • Petroleum jelly also has wound-healing properties and can help protect your skin. [5] You could swap out coconut oil with this for your ointment base. [6]
  2. Watermark wikiHow to Make Antibacterial Ointment at Home
    Put the double boiler onto your stove and turn on a medium flame. Leave the boiler there and let all of the ingredients melt down. Keep the flame on until everything in the pan is completely liquid. [7]
    Advertisement
  3. Watermark wikiHow to Make Antibacterial Ointment at Home
    Once the coconut, castor, and beeswax are all liquid, turn the heat to a low setting. Then add 10-20 drops each of lavender and lemon essential oil to round off your ointment. [8] As an added bonus, these oils will give your ointment a nice smell too.
  4. Watermark wikiHow to Make Antibacterial Ointment at Home
    Honey is well-known as an antibacterial ingredient and also shows some success in helping wounds heal. [11] If you’d like to make your ointment stronger, add 1-2 tbsp (21 g) to the mixture.
  5. Watermark wikiHow to Make Antibacterial Ointment at Home
    Once all your ingredients are added, take a spoon or a whisk and stir everything together well. Make sure the whole mixture is combined smoothly. [12]
  6. Once the ointment is mixed well, turn the flame off and leave it to cool. Within 2-3 hours, it should be cool enough for you to start using. [13]
    • The mixture will probably harden and get a bit waxy when it’s cool. This is normal.
  7. Watermark wikiHow to Make Antibacterial Ointment at Home
    This ointment is sensitive to heat and could melt if it gets hot. Store it in a cool spot out of direct sunlight. This should keep the ointment fresh and ready to use. [14]
    • If the ointment does melt, move it to a cooler spot and it should harden again soon.
    • Keep an eye on the ointment for any signs of it spoiling, like a rancid smell or mold. Get rid of it if you see these signs.
  8. Even if you do everything right, there's still always a chance that you'll have a skin reaction to the ointment. [15] If you experience any redness, swelling, itching, or burning after you apply the ointment, then stop using it immediately. If the rash doesn't go away, contact your doctor for an exam.
  9. Advertisement
Part 2
Part 2 of 2:

Using Antibacterial Ointment

PDF download Download Article

Whether you make your own ointment or use a store-bought type, there are still some safety tips you should follow to use it properly. This is especially important if you made your own ointment. Stick with all the recommended first-aid directions if you do get any cuts to keep the wound clean and avoid infections. If your cut isn’t healing well or you see signs of an infection, then visit your doctor for a checkup.

  1. Even if you’re using antibacterial ointment, it’s always important to clean any wounds first. Clean the wound with plain water and gentle soap, then rinse the wound to get rid of any dirt or leftover suds. Dry the wound with a clean towel before covering it. [16]
    • Don’t use harsh antiseptics like alcohol or peroxide on open cuts. This can cause irritation and might even make the wound heal slower. [17]
  2. Watermark wikiHow to Make Antibacterial Ointment at Home
    This can keep the wound moist and free of bacteria. Take a small amount of the ointment and rub it onto the wound. Cover the cut and surrounding area with a thin layer. [18]
    • You could also use plain petroleum jelly if you don’t have any antibacterial cream. This could be just as effective. [19]
  3. Watermark wikiHow to Make Antibacterial Ointment at Home
    Keep your cuts covered to prevent dirt and bacteria from getting in. This helps the healing process and keeps you healthy. [20]
    • You can leave small cuts uncovered as long as you keep them moist with ointment or petroleum jelly.
  4. Your wound probably needs at least a week to heal. Change the bandage and clean the wound at least once a day, then apply more ointment. [21] You can safely apply antibacterial cream for a week, unless your doctor tells you to continue for longer than that. [22]
  5. Even if you’ve cleaned and disinfected the area, these types of wounds need closer medical care. See your doctor as soon as possible if you were bitten by an animal or got cut on a rusty piece of metal to avoid serious infections. [23]
    • If you were cut with a rusty piece of metal, you’ll probably need a tetanus booster.
    • Also see your doctor for any wounds that won’t stop bleeding or have edges that are very far apart and won’t close. You may need a few stitches to take care of these.
  6. While you might think this will help, rashes usually aren't caused by bacteria. At best the ointment won't do anything to help, and it might even irritate the rash more. Skip the ointment for these problems. [24]
    • You might need an antihistamine or steroid cream to fight rashes.
  7. There’s always a chance that homemade ointment, or store-bought creams, can cause skin irritations. You might be sensitive to them, or you could have an allergy to certain ingredients. If you notice any redness, pain, burning, or itching around where you rubbed the ointment, stop using it right away. [25]
  8. Advertisement


Medical Takeaways

Making your own antibacterial ointment at home is a pretty simple process once you have the right ingredients, so you can try it for yourself if you want to. Give it a shot and see if it helps keep your cuts clean. Keep in mind that these recipes aren’t medically-approved, and doctors will probably suggest that you use a store-bought antibacterial cream instead.

Expert Q&A

Search
Add New Question
  • Question
    I have a big bumpy pimple on my buttocks. What is causing this?
    Lisa Bryant, ND
    Licensed Naturopathic Physician
    Dr. Lisa Bryant is Licensed Naturopathic Physician and natural medicine expert based in Portland, Oregon. She earned a Doctorate of Naturopathic Medicine from the National College of Natural Medicine in Portland, Oregon and completed her residency in Naturopathic Family Medicine there in 2014.
    Licensed Naturopathic Physician
    Expert Answer
    This may be a bacterial abscess, so I would have that evaluated by a physician.
  • Question
    Can I use guava leaves as dry herb in the ointment?
    Lisa Bryant, ND
    Licensed Naturopathic Physician
    Dr. Lisa Bryant is Licensed Naturopathic Physician and natural medicine expert based in Portland, Oregon. She earned a Doctorate of Naturopathic Medicine from the National College of Natural Medicine in Portland, Oregon and completed her residency in Naturopathic Family Medicine there in 2014.
    Licensed Naturopathic Physician
    Expert Answer
    Guava leaf does have antimicrobial properties and can be used as a tea or tincture.
Ask a Question
      Advertisement

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Thanks for submitting a tip for review!

      Warnings

      • Don’t use any ingredients in your ointment that you know you’re allergic to. This could cause a reaction.
      • Visit your doctor if any cuts show signs of an infection like increasing pain, redness, pus, and heat around the wound.
      Advertisement

      About This Article

      Thanks to all authors for creating a page that has been read 43,372 times.

      Did this article help you?

      Advertisement