Download Article
Download Article
You can easily turn any old, unwanted vinyl records into unique bowls! These crafty creations can be used for any storage purpose and make great gifts. All you need is an old, vinyl record, a heat-safe bowl, an oven, and a few minutes of free time. Make sure you have adequate ventilation for this project -- melting vinyl can produce harmful fumes.
Things You Should Know
- You can make a bowl out of a vinyl record by warping the record over a bowl in the oven.
- Use a metal or glass heat-safe bowl.
- Keep an eye on the record so it doesn't melt!
- Open windows and turn on a fan before you start. Melting vinyl puts off fumes that aren't safe to breathe.
Steps
-
Preheat your oven to 200 to 250°F (100 to 120°C) and open a window. Move the oven rack to the bottom of the oven. Have a window open or turn a fan on to ensure adequate ventilation. This is very important, as the melting vinyl will give off fumes that are not safe to breathe in. -
Set a metal or glass heat-safe bowl onto a baking sheet. Choose a bowl that is a little smaller than the record, and set it right-side-up onto a baking sheet. To further protect your baking sheet, line it with aluminum foil or parchment paper.- Make sure that you are happy with the size of the bowl. The record bowl will end up roughly the same size.
Advertisement -
Place the record on top of the bowl. Make sure that the record is centered and that the label is facing upward. If your record has a label on each side, make sure that the side you like the best is facing up.- If the record is dirty, clean it first.
-
Place a heavy can on top of the record. Again, make sure that the can is centered. The can will weigh the record down as it heats up, and help it conform to the shape of the bowl.
- If you don't have a can, fill a cloth bag with dried beans or rice, and use that instead.
-
Bake the vinyl until it starts to warp. Place the baking sheet into the oven and let it bake. After about 3 to 5 minutes, the vinyl will start to soften and warp. Do not bake it longer than 10 minutes.
- Adjust the shape while the record is in the oven. Use a metal spatula to poke and prod it.
-
Take the record out of the oven and let it cool. Use a pair of oven mits to take the entire baking sheet out of the oven. Set it down onto a heat-safe surface, and let the record cool down. This should only take about 10 to 15 minutes. -
Remove the record from the bowl. The record will now have a bowl-like shaped with ruffled sides. You can use it to store non-food items, like as jewelry, ornaments, or even remote controls.
Advertisement
-
Preheat your oven to 200 to 250°F (100 to 120°C). Open up a window or turn a fan on so that you have good ventilation. Make sure that the oven rack is in the bottom portion of the oven. [1] X Research source -
Set a glass or metal heat-safe bowl upside down on a baking sheet. Choose a bowl that is about 8½ to 9 inches (21.59 to 22.86 centimeters) wide. [2] X Research source Place it upside down onto a large baking sheet. If you'd like to further protect your baking sheet, cover it with aluminum foil or parchment paper first.- You can also use cans, mugs, or even metal colanders [3] X Research source
-
Place your record face down on top of the bowl. Make sure that the record is centered, and that the side you want to be on the inside is facing down. [4] X Research source
- Clean the record first if it is dirty.
-
Bake the record until it becomes soft and malleable. This should take about 3 to 5 minutes, but it would take up to 8 or 10 minutes. Keep an eye on your record, however, so that it does not melt. Once it starts to warp, you are ready for the next step.
-
Take the record out of the oven. Use a pair of oven mitts to pull the entire baking sheet out of the oven. Set it down onto a heat-safe surface. -
Shape the record with your hands. You may be able to do this with your bare hands, but you will need to be careful so that you don't burn yourself on the base bowl or the baking sheet. You can also shape the bowl using a metal spoon or spatula instead.
- The record will start to cool and harden in about 20 to 30 seconds, so work quickly!
- Alternatively, you can set the record into a smaller bowl (right-side-up) first, then shape it that way. [5] X Research source
-
Let the record cool before taking it out of the bowl. After about 10 to 15 minutes, the record should be rigid again, and cool to the touch. Once that happens, you can lift it off of the base bowl, and use it to store non-food items, such as remotes, knick-knacks, or accessories.
Advertisement
Community Q&A
Search
-
QuestionIf you inhale the fumes, what will happen? How can you treat it?T. ChinsenTop AnswererExposure to carcinogenic compounds can result in cancer many years after the initial exposure. There is no way of knowing when it will occur. Smoking became popular in the 1920s and there was a corresponding rise in the cancer rate in the 1950s. Working with any materials that outgas toxic compounds and not wearing safety gear is not a good choice. Heating vinyl results in many of these carcinogenic compounds being released.
-
QuestionDo we need proper protection from the fumes?Community AnswerYou should always wear a mask, no matter what kind of fumes you're working with. I'd recommend going with either an N-95 or heavier duty mask, as some of the paper ones don't always repel everything.
-
QuestionCan you use your oven after this?Alex LukacsffiCommunity AnswerYou should allow your oven time to no longer have fumes from the vinyl before using it again.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Tips
- If you don't like how your bowl turned out, place it back into the oven, and heat it up again! [6] X Research sourceThanks
- Pet hair sticks to vinyl records. If your furry housemate sheds on your record bowl, simply wipe the bowl clean with a damp cloth. [7] X Research sourceThanks
- Spray the base bowl with cooking spray before adding the record to make the record easier to remove. [8] X Research sourceThanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
Warnings
- Keep an eye on the record while it is in the oven. Vinyl records melt quickly!Thanks
- Do not leave the can in the oven for too long, as it may explode due to the heat. It might be a good idea to puncture the can first.Thanks
- Keep a window open or a fan on. The vinyl will give off fumes as it bakes; these fumes are not safe to breathe in.Thanks
- Do not use the bowls for food, even dried.Thanks
Advertisement
Things You'll Need
Using the Outside of a Bowl
- Oven
- Baking sheet
- Heat-safe bowl
- Can
- Old record
- Oven mitts
Using the Inside of a Bowl
- Oven
- Baking sheet
- Heat-safe bowl, 8½ to 9 inches (21.59 to 22.86 centimeters) wide
- Can
- Old record
- Oven mitts
References
- ↑ https://www.upcyclethat.com/record-bowls/
- ↑ http://offbeatbride.com/diy-record-bowl/
- ↑ https://www.upcyclethat.com/record-bowls/
- ↑ http://offbeatbride.com/diy-record-bowl/
- ↑ http://offbeatbride.com/diy-record-bowl/
- ↑ https://www.upcyclethat.com/record-bowls/
- ↑ http://www.thriftyfun.com/tf895928.tip.html
- ↑ http://offbeatbride.com/diy-record-bowl/
- ↑ http://www.starsforstreetlights.com/diy-vinyl-record-bowls/
About This Article
Thanks to all authors for creating a page that has been read 602,216 times.
Reader Success Stories
- "I feel that the step-by-step description of molding the records was perfect and the pictures helped. Thank you."
Advertisement
100%
of readers found this article helpful
.
Click a star to add your vote
% of people told us that this article helped them.
"I feel that the step-by-step description of molding the records was perfect and the pictures helped. Thank you."
"Very easy to read and understand. Ready to try, but will use precautions. Thank you so much."
